Acoustic energy harvesting using an electromechanical Helmholtz resonator

This paper presents the development of an acoustic energy harvester using an electromechanical Helmholtz resonator (EMHR). The EMHR consists of an orifice, cavity, and a piezoelectric diaphragm. Acoustic energy is converted to mechanical energy when sound incident on the orifice generates an oscillatory pressure in the cavity, which in turns causes the vibration of the diaphragm. The conversion of acoustic energy to electrical energy is achieved via piezoelectric transduction in the diaphragm of the EMHR. Moreover, the diaphragm is coupled with energy reclamation circuitry to increase the efficiency of the energy conversion. Lumped element modeling of the EMHR is used to provide physical insight into the coupled energy domain dynamics governing the energy reclamation process. The feasibility of acoustic energy reclamation using an EMHR is demonstrated in a plane wave tube for two power converter topologies. The first is comprised of only a rectifier, and the second uses a rectifier connected to a flyback converter to improve load matching. Experimental results indicate that approximately 30 mW of output power is harvested for an incident sound pressure level of 160 dB with a flyback converter. Such power level is sufficient to power a variety of low power electronic devices.     

Nature of magnetic coupling between Mn ions in As-grown Ga1-xMnxAs studied by X-ray magnetic circular dichroism

The magnetic properties of as-grown Ga1-xMnxAs have been investigated by the systematic measurements of temperature and magnetic field dependent soft x-ray magnetic circular dichroism (XMCD). The intrinsic XMCD intensity at high temperatures obeys the Curie-Weiss law, but a residual spin magnetic moment appears already around 100 K, significantly above the Curie temperature (T_{C}), suggesting that short-range ferromagnetic correlations are developed above T_{C}. The present results also suggest that the antiferromagnetic interaction between the substitutional and interstitial Mn (Mn_{int}) ions exists and that the amount of the Mn_{int} affects T_{C}.     

Reduction of thermal fluctuations in a cryogenic laser interferometric gravitational wave detector

The thermal fluctuation of mirror surfaces is the fundamental limitation for interferometric gravitational wave (GW) detectors. Here, we experimentally demonstrate for the first time a reduction in a mirror's thermal fluctuation in a GW detector with sapphire mirrors from the Cryogenic Laser Interferometer Observatory at 17 and 18 K. The detector sensitivity, which was limited by the mirror's thermal fluctuation at room temperature, was improved in the frequency range of 90 to 240 Hz by cooling the mirrors. The improved sensitivity reached a maximum of 2.2×10(-19) m/√Hz at 165 Hz.     

Rapid sea-level change in the Late Guadalupian (Permian) on the Tethyan side of South China: litho- and biostratigraphy of the Chaotian section in Sichuan

The Capitanian (Late Guadalupian) Maokou Formation at Chaotian in northern Sichuan, South China, is composed mainly of shallow marine shelf carbonates deposited on the Tethyan side of South China. By detailed field mapping and scientific drilling, we newly found out unique fossil assemblages and a sharp lithologic change in the upper part of the Maokou Formation. The main part of the Maokou Formation (over 130 m thick) is composed of algal packstone with Wordian-Capitanian large-tested fusulines, rugose corals and other sessile benthos, whereas the Uppermost Member (13 m thick) is composed of black limy mudstone/chert with Capitanian offshore biota (ammonoids, radiolarians, and conodonts). The topmost Capitanian conodont zones are missing; however, the Maokou Formation is disconformably overlain by 260+/-4 Ma volcanic ash (Wangpo bed) and the Early Lopingian Wujiaping Formation with plant-bearing coaly mudstone and shallow marine carbonates (packstone). The newly identified facies change indicates that northern Sichuan has experienced rapid sea-level changes in the late Guadalupian, i.e., first a transgression in the mid-Capitanian and then a regression across the Guadalupian-Lopingian boundary. As the end-Guadalupian is characterized by a global regression, such a volatile sea-level fluctuation, in particular the sea-level rise, is unique to the Tethyan side of South China. The newly recognized relatively deep-water late Guadalupian sequence adds new paleo-environmental information and further provides a paleotectonic interpretation of the low-latitude eastern Tethyan margin immediately before the end-Guadalupian mass extinction.     

Hyperfine interactions in icosahedral quasicrystals: a Mössbauer study

Icosahedral Al₆₅Cu₂₀Fe₁₅ and Al₄₀Cu_9.9Ge₂₅Mn₂₅ ⁵⁷Fe_0.1 quasicrystals are studied using⁵⁷Fe transmission Mössbauer experiments. The spectra are analyzed by distributions of electric-quadrupole interaction accounting for line asymmetries. Temperature dependences of the hyperfine parameters derived comprising average values ofP() distributions, corresponding standard deviations and center shifts are presented in a whole range from 8 to 300 K.     

Local order of icosahedral quasicrystals studied by Mössbauer spectroscopy

Thermodynamically stable Al-Cu-Fe and Fe-doped ferromagnetic Al-Cu-Ge-Mn icosahedral quasicrystals are studied by⁵⁷Fe transmission Mössbauer spectroscopy and X-ray diffraction experiments. Al₆₅Cu₂₀Fe₁₅ quasicrystalline alloy was subjected to a mechanical grinding (MG) for up to 800 hours in a ball mill. Presence of the amorphous phase which co-exists with the quasicrystalline one is revealed in the early stage of MG. Mössbauer measurements were performed on icosahedral Al₄₀Cu_10–x Ge₂₅Mn₂₅Fe _x quasicrystal (x0.1; 3) in a temperature range from 10 K to 548 K. It was found that a magnetic transition occurs at about 30 K which is far belowT _c reported in the literature. It is concluded that AlGeMn ferromagnet which is present in the samples does not affect the magnetic transition observed and the transition is an intrinsic property of the Al-Cu-Ge-Mn host alloy.Samples of icosahedral quasicrystals were kindly provided by Profs. A. Inoue, T. Masumoto and P. H. Shingu. Ball milling was performed in Kyoto University by a courtesy of Prof. P. H. Shingu. This work was supported by the project for priority areas on properties of quasicrystals (No. 01630003) from the Japanese Ministry of Education, Science and Culture.     

Resolving Discrepancy between Theoretical and Experimental Optical Trapping Forces Using Effects of Beam Waist and Trapping Position Displacement due to Gravity

Optical trapping forces of polystyrene microspheres are analyzed both theoretically and experimentally, and comparisons are made between the two. Discrepancies are mainly caused by straight-ray approximation for axial trapping, and by trapping-position vertical displacement due to gravity for transverse trapping.     

Development of a micromachined piezoelectric microphone for aeroacoustics applications

This paper describes the design, fabrication, and characterization of a bulk-micromachined piezoelectric microphone for aeroacoustic applications. Microphone design was accomplished through a combination of piezoelectric composite plate theory and lumped element modeling. The device consists of a 1.80-mm-diam, 3-microm-thick, silicon diaphragm with a 267-nm-thick ring of piezoelectric material placed near the boundary of the diaphragm to maximize sensitivity. The microphone was fabricated by combining a sol-gel lead zirconate-titanate deposition process on a silicon-on-insulator wafer with deep-reactive ion etching for the diaphragm release. Experimental characterization indicates a sensitivity of 1.66 microVPa, dynamic range greater than six orders of magnitude (35.7-169 dB, re 20 microPa), a capacitance of 10.8 nF, and a resonant frequency of 59.0 kHz.     

Zirconia-based planar NO2 sensor using ultrathin NiO or laminated NiO–Au sensing electrode

The nanostructured thin NiO films with the thicknesses of 30–180 nm were examined as a sensing electrode (SE) for the planar mixed-potential-type yttria-stabilized zirconia (YSZ)-based NO₂ sensor. The sensing characteristics were examined in the temperature range of 600–800 °C under the wet condition (5 vol.% water vapor). Among the NiO-SEs tested, the 60 nm-thick NiO-SE sintered at 1,000 °C was found to give the highest NO₂ sensitivity in the NO₂ concentration range of 50–400 ppm accompanying with fast response/recovery at the operating temperatures of 600–700 °C. The high NO₂ sensitivity was attributed to the high catalytic activity for both electrochemical reactions of O₂ and NO₂ at the interface of NiO-SE/YSZ. The ultrathin gold layer with the thickness of about 60 nm was additionally formed on the 60 nm-thick NiO-SE to fabricate the laminated-type (60 nm NiO/60 nm Au)-SE. It was demonstrated that the use of this laminated (NiO–Au)-SE improved both the sensitivity and the selectivity to NO₂.     

Effect of interstitial impurities on positronium formed in voids of vanadium

Angular correlation of two-photon annihilation radiation (ACAR) measurements have been performed to study the effect of interstitial impurities (O, C and D) on positronium (Ps) formation in irradiation-induced voids of vanadium. It has been observed that Ps formation is sensitively affected by doping with the interstitial impurities, irradiation dose, irradiation temperature, and also by post-irradiation annealing. The Ps component intensity is found to be related to segregation of the interstitial impurities and provides a new experimental method to study void surfaces.