REDUCTIVE DEIMINATION OF SULFOXIMIDES AND SULFIMIDES WITH P-TOLUENESULFONYL NITRITE AND T-BUTYL THIONITRATE1

Abstract

Reduction of sulfimides and sulfoximides with p-toluenesulfonyl nitrite, a new nitrosating agent, gave nearly quantitatively the corresponding deimination products, sulfides and sulfoxides, respectively. In the reaction of dialkyl and aryl alkyl sulfoximides with t-butyl thionitrate, N-t-butylthiosulfoximides were obtained besides the usual deimination products, although diaryl sulfoximides were readily deiminated to the corresponding sulfoxides in good yields in the same treatment. t-Butyl thionitrate was also found to deiminate diphenyl sulfimide to give diphenyl sulfide in good yield. Sulfoximides reacted sluggishly with t-butyl thionitrite, however, eventually affording a small amount of sulfoxides.     

Use of chromatographic pre-concentration for routine uranium bioassay analysis by ICP-MS

Routine monitoring of urine is an effective way to detect occupational intake of radioactive material. Historically, determinations of uranium isotopic ratios have been performed by radiochemical separation followed by alpha spectrometry. With recent advancements in technology, inductively coupled plasma-mass spectrometry (ICP-MS) has become widely available for the determination of trace metals as well as radioactive nuclides with long half-lives, such as ²³⁸U in urine. Furthermore, ICP-MS measurements of ²³⁸U do not require radiochemical separation since the number of atoms in the sample is determined instead of the number of alpha particles emitted. However, this method does not provide good sensitivity for the determination of ²³⁵U due to its shorter half-life. An improved procedure using pre-concentration of uranium and determination by ICP-MS decreases the detection limit by a factor of ten or greater with only slight increase in total analysis time. The method also has the capability of accurately determining the isotopic ratio of the sample, which is very important in cases where enriched or depleted uranium is involved.     

Quinonediimine‐Induced Oxidative Coupling of Organomagnesium Reagents

N,N′‐Diphenyl‐p‐benzoquinonediimine, a redox‐active unit of polyaniline, efficiently induced the oxidative homocoupling of various aryl‐ and vinylmagnesium reagents in suppressing the side reactions, such as 1,2‐ or 1,4‐addition reaction.     

Macrocyclic Metal Complexes Bearing Rigid Polyaromatic Ligands: Synthesis and Catalytic Activity

We synthesised palladium and platinum complexes possessing cyclic and acyclic pincer‐type polyaromatic ligands and investigated their structural effect on the catalysis. The pincer‐type bis(6‐arylpyridin‐2‐yl)benzene skeleton was constructed via Kröhnke pyridine synthesis under transition metal‐free conditions on gram‐scale quantity. Ligand structure significantly influenced catalytic activity toward the platinum‐catalysed hydrosilylation of diphenyl acetylenes, despite the ligand‐independence of the conformations and electronic properties of these complexes.     

Reinvestigation of the thermoelectric properties of Ag8GeTe6

High‐density polycrystalline samples (above 98% of the theoretical density) of Ag₈GeTe₆ were prepared by solid‐state reactions of Ag₂Te, GeTe, and Te, followed by hot‐pressing. The thermoelectric properties were measured at temperatures ranging from room temperature to around 700 K. The thermal conductivity values were extremely low (0.25 Wm^–1 K^–1 at room temperature), and consequently Ag₈GeTe₆ exhibited a relatively high thermoelectric figure of merit, ZT = 0.48 at 703 K. (© 2008 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Acoustic energy harvesting using an electromechanical Helmholtz resonator

This paper presents the development of an acoustic energy harvester using an electromechanical Helmholtz resonator (EMHR). The EMHR consists of an orifice, cavity, and a piezoelectric diaphragm. Acoustic energy is converted to mechanical energy when sound incident on the orifice generates an oscillatory pressure in the cavity, which in turns causes the vibration of the diaphragm. The conversion of acoustic energy to electrical energy is achieved via piezoelectric transduction in the diaphragm of the EMHR. Moreover, the diaphragm is coupled with energy reclamation circuitry to increase the efficiency of the energy conversion. Lumped element modeling of the EMHR is used to provide physical insight into the coupled energy domain dynamics governing the energy reclamation process. The feasibility of acoustic energy reclamation using an EMHR is demonstrated in a plane wave tube for two power converter topologies. The first is comprised of only a rectifier, and the second uses a rectifier connected to a flyback converter to improve load matching. Experimental results indicate that approximately 30 mW of output power is harvested for an incident sound pressure level of 160 dB with a flyback converter. Such power level is sufficient to power a variety of low power electronic devices.     

Ligand Design to Acquire Specificity to Intended G-Quadruplex Structures

A G-quadruplex is a nucleic acid secondary structure that is adopted by guanine-rich sequences, and is considered to be relevant in various pharmacological and biological contexts. G-Quadruplexes have also attracted great attention in the field of DNA nanotechnology because of their extremely high thermal stability and the availability of many defined structures. To date, a large repertory of DNA/RNA G-quadruplex-interactive ligands has been developed by numerous laboratories. Several relevant reviews have also been published that have helped researchers to grasp the full scope of G-quadruplex research from its outset to the present. This review focuses on the G-quadruplex ligands that allow targeting of specific G-quadruplexes. Moreover, unique ligands, successful methodologies, and future perspectives in relation to specific G-quadruplex recognition are also addressed.     

Synthesis and characterization of 9,9‐bis(4‐hydroxyphenyl and 4‐aminophenyl)dibenzofluorenes: Novel fluorene‐based monomers

Two novel 9,9‐difunctionalized fluorene‐type monomers, 9,9‐bis(4‐hydroxyphenyl‐ and 4‐aminophenyl)‐2,3:6,7‐dibenzofluorenes, are synthesized by the reaction of dibenzenzofluorenone with phenol and aniline. These monomers are used for the preparation of polyester and polyimide as the typical polymers to evaluate the property change such as thermal stability caused by the benzene rings fused to the fluorene skeleton with keeping good solubility, in comparison with the polymers derived from simple fluorenone. In fact, these two new polymers have the fairly enhanced thermal stability and refractive index value along with satisfactory solubility in organic solvents, enough to emphasize the fusion effect. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 2602–2605     

Three Distinct Redox States of an Oxo‐Bridged Dinuclear Ruthenium Complex

A series of [{(terpy)(bpy)Ru}(μ‐O){Ru(bpy)(terpy)}]ⁿ⁺ ( [RuORu]ⁿ⁺ , terpy=2,2′;6′,2′′‐terpyridine, bpy=2,2′‐bipyridine) was systematically synthesized and characterized in three distinct redox states (n=3, 4, and 5 for Ru^II,III₂ , Ru^III,III₂ , and Ru^III,IV₂ , respectively). The crystal structures of [RuORu]ⁿ⁺ (n=3, 4, 5) in all three redox states were successfully determined. X‐ray crystallography showed that the Ru? O distances and the Ru‐O‐Ru angles are mainly regulated by the oxidation states of the ruthenium centers. X‐ray crystallography and ESR spectra clearly revealed the detailed electronic structures of two mixed‐valence complexes, [Ru^IIIORu^IV]⁵⁺ and [Ru^IIORu^III]³⁺ , in which each unpaired electron is completely delocalized across the oxo‐bridged dinuclear core. These findings allow us to understand the systematic changes in structure and electronic state that accompany the changes in the redox state.