Prospects of Sol-Gel Process for Spectral Hole-Burning Glasses

Persistent spectral hole burning was studied in Eu³⁺ ions-doped Al₂O₃-SiO₂ glass prepared by a sol-gel method. The gel synthesized by the hydrolysis of Si- and Al-alkoxides and EuCl₃·6H₂O was heated in air and hydrogen gas atmospheres. For the glass heated in air to contain OH bonds, the hole was formed by the photoinduced rearrangement of the OH bonds surrounding the Eu³⁺ ions, and was thermally refilled and erased above 200 K. On the other hand, the glass heated in hydrogen gas showed the hole spectrum above 200 K. It was found that the hole depth was independent of the temperature and was 7% of the total intensity at room temperature. The proposed mechanism was the electron transfer between the Eu³⁺ ions and the defect centers formed in glass matrix.     

Two-dimensional network formation of cardiac myocytes in agar microculture chip with 1480 nm infrared laser photo-thermal etching

We have developed a new method that enables agar microstructures to be used to cultivate cells and that allows cell network patterns to be controlled. The method makes use of non-contact three-dimensional photo-thermal etching with a 1480 nm infrared focused laser beam, which is strongly absorbed by water and agar gel, to form the shapes of agar microstructures. It allows microstructures to be easily formed in an agar layer within a few minutes, with cell-culture holes formed by the spot heating of a 100 mW laser and tunnels by the tracing of a 100 microm s(-1), 40 mW laser. We cultivated rat cardiac myocytes in adjacent microstructures and observed synchronized beating in them 90 min after they had made physical contact. Our results indicate that the system can make and use microstructures for cell-network cultivation in a minimal amount of time without any expensive microfabrication facilities or complicated procedures.     

Streptonigrin and lavendamycin partial structures. Preparation of 7-amino-2-(2′-pyridyl)quinoline-5,8-quinone-6′-carboxylic acid: A probe for the minimum,potent pharmacophore of the naturally occurring antitumor-antibiotics

The preparation of 7-amino-2-(2′-pyridyl)quinoline-5,8-quinone-6′-carboxylic acid (4) constituting a potential minimum, potent pharmacophore of streptonigrin (1) and lavendamycin (2) , two structurally-related naturally-occurring antitumor-antibiotic, is detailed. In contrast to observations associated with streptonigrin and lavendamycin in which the C-6′ acid potentiates the antitumor, antimicrobial, and cytotoxic activity of the naturally-occurring, substituted 7-aminoquinoline-5,8-quinone AB ring systems, the C-6′ carboxylic acid of 4 diminishes the observed antimicrobial and cytotoxic properties of 7-amino-2-(2′-pyridyl)quinoline-5,8-quinone.     

A potentiometric microbial sensor based on immobilized escherichia coli for glutamic acid

The sensor consists of immobilized E. coli (which contains glutamate decarboxylase) and a carbon dioxide gas-sensor. Continuous introduction of sample solution into a flow system incorporating the sensor gives a potential which increases until a steady state is reached after 5 min. Measurements can also be made with only a 1- or 3-min introduction period with little loss of sensitivity. Calibration plots of mV measurements vs. logarithmic glutamic acid concentration are linear in the range 100–800 mg l^-1. The sensor is highly selective, stable and reproducible. It has been applied to the determination of glutamic acid in fermentation broths.     

Lupane-triterpene glycosides from the leaves of Acanthopanax gracilistylus

A novel lupane-triterpene glycoside, called wujiapioside B (1), was isolated from the leaves of Acanthopanax gracilistylus (Araliaceae) together with three known lupane-triterpene glycosides, acankoreoside C (2), acantrifoside A (3) and 3-epibetulinic acid 28-O-alpha-L-rhamnopyranosyl-(1-->4)-beta-D-glucopyranosyl-(1-->6)-beta-D-glucopyranosyl ester (4). Based on spectroscopic data, the chemical structure of 1 was determined as 3alpha,23-dihydroxy-lup-20(29)-en-28-oic acid 28-O-alpha-L-rhamnopyranosyl-(1-->4)-beta-D-glucopyranosyl-(1-->6)-beta-D-glucopyranosyl ester. Compounds 2-3 were obtained for the first time from this plant and compound 4 has not been isolated from Acanthopanax genus yet.     

Sulfation of hesperetin,naringenin and apigenin by the human cytosolic sulfotransferases: a comprehensive analysis

Abstract

Previous studies have revealed sulfation as a major pathway for the metabolism of hesperetin, naringenin and apigenin. The current study was designed to identify the human cytosolic sulfotransferase (SULT) enzyme(s) capable of sulfating these flavonoid compounds. Of the thirteen human SULTs, six (1A1, 1A2, 1A3, 1B2, 1C4, 1E1) displayed significant sulfating activity toward hesperetin, five (1A1, 1A2, 1A3, 1B2, 1C4) displayed sulfating activity towards naringenin, and four (1A1, 1A2, 1A3, 1C4) showed sulfating activity towards apigenin. Of the four human organ specimens tested, liver and intestine cytosols displayed much higher hesperetin-, naringenin- and apigenin-sulfating activity than lung and kidney cytosols. Moreover, sulfation of hesperetin, naringenin and apigenin was shown to take place in HepG2 human hepatoma cells and Caco-2 human colon adenocarcinoma cells under cultured conditions. Taken together, these results provided a biochemical basis underlying the metabolism of hesperetin, naringenin and apigenin through sulfation in humans.

     

Penetration of plasma surface modification. I. Cf4 and C2F4 glow discharge plasmas

Plasma treatment of a polymeric surface could involve at least three major mechanisms: (1) direct interaction of reactive species in the low-temperature plasma state with the surface (line of sight irradiation effect), and (2) chemical reactions of plasma-induced reactive species with the surface, and (3) reactions among reactive species and the surface (plasma polymerization). The first and the third effects are considered to be limited to the surfaces which directly contact with plasma (glow). The second effect is not limited to the surfaces that contact with plasma state but can penetrate beyond the plasma zone by diffusion. Using an assembly of fibers, of which only the top layer contacts with plasma (glow), the penetration of chemical changes caused by plasma exposure was investigated. Results indicate that the fluorination effect (incorporation of fluorine-containing moieties on the surface of polymeric substrate) penetrates through a considerable thickness of the assembly of fibers, depending on the porosity (gas permeability) of the system. Chemical reactions of plasma-induced (chemically) reactive but nonpolymerizing species with the substrate fibers seems to predominate. The direct interactions of energetic species, such as ions, electrons, and electronically excited species, with polymeric surfaces seems to play relatively minor roles in the plasma treatment investigated. The major role of plasma, in this case, seems to be creating such chemically reactive species. © 1994 John Wiley & Sons, Inc.     

Cluster-size dependence of alloying behavior in gold clusters

Cluster-size dependence of alloying behavior in nm-sized atom clusters has been studied by transmission electron microscopy, using clusters in the Au-Cu system. It was revealed that occurrence of rapid spontaneous alloying becomes more difficult with increasing cluster size. In gold clusters of approximately 4 nm in the mean size, a rapid dissolution of copper atoms took place and homogeneously mixed Au-Cu alloy clusters were formed. In gold clusters of approximately 10 nm in the mean size, rapid alloying of copper took place only at a shell-shaped region beneath the free surface of individual clusters and pure gold was retained at the central region of clusters. In gold clusters of approximately 30 nm in the mean size, no rapid alloying of copper was induced. The ease with which spontaneous alloying takes place is discussed in terms of the lattice softening in atom clusters.