Bottom-up driven involuntary attention modulates auditory signal in noise processing

Background  

Auditory evoked responses can be modulated by both the sequencing and the signal-to-noise ratio of auditory stimuli. Constant sequencing as well as intense masking sounds basically lead to N1m response amplitude reduction. However, the interaction between these two factors has not been investigated so far. Here, we presented subjects tone stimuli of different frequencies, which were either concatenated in blocks of constant frequency or in blocks of randomly changing frequencies. The tones were presented either in silence or together with broad-band noises of varying levels.     

Jet ejection from droplets near the Leidenfrost temperature

Abstract  

Droplets impinging on a hot surface that is near the Leidenfrost temperature were experimentally investigated. Ejection of jets from the top of the droplet was observed during the transient interaction between the droplet and a hot wall. We term this phenomenon jet ejection from droplets. When the bottom of the droplet initially impacts the hot surface, a jet is to be ejected from the top of the droplet. The jet ejection occurred only at low impact velocities and around the wetting limit temperature. It was not observed when droplets were dropped from large heights or when the surface was at a high temperature.     

In-situ X-ray diffraction study on β-CrOOH at high pressure and high-temperature

ABSTRACT

High pressure hydrous phases with distorted rutile-type structure have attracted much interest as potential water reservoirs in the Earth’s mantle. An in-situ X-ray diffraction study of β-CrOOH was performed at high pressures of up to 6.2?GPa and high-temperatures of up to 700?K in order to clarify the temperature effect on compression behaviors of β-CrOOH. The P-V-T data fitted to a Birch–Murnaghan equation of state yielded the following results: isothermal bulk modulus K_T0?=?191(4)?GPa, temperature derivative (?K_T/?T)_P?=??0.04(2)?GPa?K^?1, and volumetric thermal expansion coefficient α?=?3.3(2)?×?10^?5?K^?1. In this study, at 300?K, the a-axis became less compressible at pressures above 1–2?GPa. We found that the pressure where the slopes of a/b and a/c ratios turned positive increased with temperature. This is the first experimental study indicating the temperature dependence of the change in the axial compressibility in distorted rutile-type M³⁺OOH.     

Structure determination of the Cu(0 0 1)–c(4 × 4)-Sn surface by low-energy electron diffraction

Low-energy electron diffraction (LEED) have been used to determine the Cu(0 0 1)–c(4 × 4)-Sn structure formed at 300 K. It is demonstrated that a structural model suggested by scanning tunneling microscopy observations is correct: The model consists of one substitutional Sn atom and four Sn adatoms in the unit cell. Optimum parameters of the determined c(4 × 4) structure reveal that Sn adatoms laterally are displaced by 0.30 Å away from ideal fourfold-hollow sites along the 〈100〉 directions. It is proposed that such displacements of the Sn adatoms cause the formation of a network of octagonal rings on Cu(0 0 1). The substitutional Sn atom is located at each center of the octagonal rings. The formation conditions of the network are discussed.     

Sound attenuation in one-dimensional magnetic systems at finite temperatures

Sound attenuattion constants are calculated for the one-dimensional ferro- and antiferromagnetic systems at finite temperatures. Their frequency dependences, in both cases, turn out to be $\text{ω}{}^{\mathrm{<mtext>3</mtext><mtext>2</mtext>}}{}_{\mathrm{<mtext>k</mtext>}}\text{if}\text{ω}{}_{\mathrm{<mtext>k</mtext>}}\text{? ω}{}_{\mathrm{c}}\text{and}\text{ω}{}^2{}_{\mathrm{<mtext>k</mtext>}}\text{if}\text{ω}{}_{\mathrm{<mtext>k</mtext>}}\text{?ω}{}_{\mathrm{c}}$, where ω_c is a “cut-off” frequency related to the three-dimensional anisotropic interactions.     

Oligosaccharide-Carrying Styrene-Type Macromers. Polymerization and Specific Interactions Between the Polymers and Liver Cells

Polystyrene derivatives with lactose, glucose, maltose, maltotriose, maltopentaose, and maltoheptaose on each benzene ring were prepared by the radical polymerization of a new class of macromers synthesized by coupling the corresponding oligosaccharide lactones with p-vinylbenzylamine. These polymers consisting of amphiphilic structural units were water-soluble, and organic solutes were bound to hydrophobic microenvironments of the polymers in water. α-D-Glucopyranose-carrying polymers were recognized and precipitated by concanavalin A. Cultivation of liver cells (hepatocytes) was attempted using culture dishes whose surface was coated with lactose-, glucose-, maltose-, and maltotriose-carrying polystyrenes. It has been found that a lactose-carrying polystyrene (PVLA) is a useful surface material for hepatocyte culture. 1) Highly specific adhesion of hepatocytes was attained for PVLA-coated dishes with or without serum supplement. 2) The cell adhesion was a threshold phenomenon with respect to the PVLA concentration on the dish. 3) The cell adhesion was effectively inhibited when hepatocytes were treated with PVLA molecules in the medium prior to culture. 4) The adhesion was not inhibited by albumin, an adhesion-inhibitory protein in serum. These findings suggest that pendent galactose residues of a PLVA molecule functioned as a strong recognition determinant for hepatocytes. We assume that multi-antennary, high-density galactose residues of PVLA are attributed to the specific adhesion of hepatocytes.     

Mineral Composition of Seawater Bittern Nigari Products and Their Effects on Changing of Browning and Antioxidant Activity in the Glucose/Lysine Maillard Reaction

Seawater bittern (nigari) is a concentrated solution remaining after the crystallization process of salt that has been used as a coagulant for tofu. Recently, various nigari products are distributed in the East Asia. To clarify the properties of nigari products, major mineral composition of six nigari products was determined. Then, effects of the nigari on the browning and antioxidant activity during the glucose/lysine Maillard reaction were investigated. Though the predominant cation was Mg²⁺, the content was varied by each product (0.88–6.49 mol/L). The other major ion contents were also varied. Each 0.5 mol/L of d-glucose and l-lysine were incubated with the nigari (5–50 % (v/v)) or nigari-related salts (1 or 2 mol/L). The browning (OD at 465 nm) and antioxidant activity (1,1-diphenyl-2-picrylhydrazyl (DPPH) radical-scavenging capacity and ferrous-reducing power) were increased remarkably by the nigari containing high Mg²⁺ content. The browning tended to be high with sulfates (Na₂SO₄, (NH₄)₂SO₄). On the other hand, high content of MgCl₂ decreased slightly the browning and antioxidant activity. These results suggest that the reaction and antioxidant activities were affected not only by salinity and cations but also by anions and other elements in the nigari.     

Involvement of Proton Transfer for Carbon Dioxide Reduction Coupled with Extracellular Electron Uptake in Shewanella oneidensis MR‐1

Microbial biosynthesis of hydrocarbon from CO₂ reduction driven by electron uptake process from the cathodic electrode has gained intensive attention in terms of potential industrial application. However, a lack of a model system for detailed studies on the mechanism of the CO₂ reduction hinders the improvement in efficiency for microbial electrosynthesis. Here, we examined the mechanism of microbial CO₂ reduction at the cathode by a well‐described microbe for extracellular electron uptake, Shewanella oneidensis MR‐1, capable of reducing gaseous CO₂ to produce formic acid. Using whole‐cell electrochemical assay, we observed stable cathodic current production at ?0.65 V vs Ag/AgCl KCl sat. associated with the introduction of CO₂. The observed cathodic current was enhanced by the addition of 4 μM riboflavin, which specifically accelerates the electron uptake process of MR‐1 by the interaction to its outer‐membrane c‐type cytochromes. The significant impact of an uncoupler agent and a mutant strain of MR‐1 lacking sole F‐type ATPase suggested the importance of proton import to the cytoplasm for the cathodic CO₂ reduction. The present data suggest that MR‐1 potentially serves as a model system for microbial electrosynthesis from CO₂.     

Electrochemical formation of cation-exchanging polypyrrole films within various hydrophilic–hydrophobic domains

The electrochemical polymerization technique has been successfully applied to produce conducting polymer film of controlled ion exchange properties. Polypyrrole films were prepared by electro-oxidative polymerization with doping some alkylsulfonates or Nafion. The ion exchange characteristics across polypyrrole films were examined by means of a novel electrochemical technique, namely, the in situ electrochemical quartz crystal microbalance (EQCM) method. According to EQCM measurements, exchanging ion species was found to be successfully controlled by changing the hydrophilic–hydrophobic balance of the incorporated sulfonated-based dopants. The film's characteristics became anion- to cation-exchanging as the dopants became more hydrophobic in nature. The polypyrrole–Nafion(poly(perfluoroethylene sulfonate)) composite film became to be a complete cation exchanger.     

Protecting structure analyses of organic molecule-protected nanoscopic noble metal clusters

The stabilizing structure of cationic surfactant-protected platinum clusters in water and tertiary amine-protected rhodium clusters in chloroform, prepared by photo- and hydrogen-reduction, respectively, was investigated. These nanoscopic noble metal clusters present a narrow size distribution and are stable. The structural information of protective organic molecules on the surface of metal clusters was studied by transmission electron microscopy and hydrodynamic radius measurements according to the Taylor dispersion method. The size of the entire cluster with the protective layer surrounding the metal surface, obtained as Stokes' radii by the Taylor dispersion method, is considered to be fairly consistent with the sum of the naked particle size, obtained by transmission electron micrographs, and the size of the adsorbed protective layer, supporting the conformational information.