Photocationic crosslinking of poly(2,3-epithiopropyl methacrylate) and photo-initiated cationic polymerization of its model compounds

Photocationic crosslinking of a poly(2,3-epithiopropyl methacrylate) (PETMA) film containing 4-N,N-diethylaminobenzene diazonium tetrafluoroborate (DAC) was investigated. Very rapid photocrosslinking of PETMA was observed and the rate was greater than that of poly(glycidyl methacrylate) with DAC. Post-heating of the irradiated PETMA film resulted in a decrease of the insoluble fraction. This decrease was explained by scission of crosslinking points by the BF₃. In the present conditions, more than 0.3 wt % of DAC was required to insolubilize the PETMA film. Photopolymerizations of propylene sulfide (PS) and 2,3-epithiopropyl pivalate (ETPP) in the presence of DAC were investigated. The polymerization of PS proceeded smoothly but addition of ethyl acetate to PS depressed the rate and the degree of polymerization. ETPP could not be polymerized but copolymerized with PS by this method. Addition of ETPP to PS depressed both the rate of the polymerization and the degree of polymerization. From these results, it is deduced that the photocrosslinking of a PETMA film is caused by a cationic polymerization of episulfide groups but the chain length is not large.     

Preparation of boron-doped semiconducting diamond films using BF3 and the electrochemical behavior of the semiconducting diamond electrodes

Boron-doped semiconducting diamond films were prepared using BF₃ by microwave plasma assisted chemical vapor deposition. B-doping was confirmed by SIMS and Raman spectroscopic measurements and the B-doping levels were estimated. Electrochemical behaviors of boron-doped diamond thin-film electrodes prepared using B₂H₆ and BF₃ were studied by measuring cyclic voltammograms for anodic oxidation of 1,4-difluorobenzene in the liquid electrolyte, neat Et₄NF·4HF. The results of the direct thermal interaction of elemental fluorine with hydrogenated and oxidized diamond surfaces are also presented.     

Surface ionization detector with a supersonic free jet for gas chromatography some applications

A new design for a gas chromatographic surface ionization detector based upon hyperthermal positive surface ionization has been developed: There were two requirements: supersonic free jet nozzle and the high work function surface of Re-oxide. This detector, which is highly sensitive in response to all organic compounds, can be operated as an universal detector with an additional selectivity towards some species that have low ionization energy, but with selectivity to a much lesser degree than a conventional surface ionization detector. The minimum detectable amount of toluene is ca. 10⁻¹² g/s with a linearity greater than 10⁴. Some applications are demonstrated using three examples for the analysis of different formulations: (1), terpene mixture, (2), polycyclic aromatic hydrocarbon mixture and (3), alkyl alcohol mixture.     

The determination of traces of organohalogen compounds in aqueous solution by direct injection gas chromatography—mass spectrometry and single ion detection

By means of gas chromatography—mass spectrometry with direct injection, a diglycerol column and single ion detection, a detection limit of 2 μg l^-1 can be obtained for chloroform and other organohalogen compounds in aqueous solutions: no concentration or extraction is required.     

Synthesis and properties of multiblock copolymers based on polydimethylsiloxane and polyamides from dicarboxylic acid and diisocyanate terminated functionalities

Polydimethylsiloxane (PDMS)–polyamide multiblock copolymers were successfully synthesized via diisocyanate route by two different procedures, i.e., the one-step and two-step methods, In the two-step method, α, ω-diisocyanate-terminated polyamide oligomers, which were prepared in situ from a mixture of isophthalic acid (IPA) and azelaic acid (AZA) with 4,4′-methylenedi (phenyl isocyanate) (MDI) in 1,3-dimethyl-2-imidazolidone (DMI) in the presence of 3-methyl-1-phenyl-2-phosopholene 1-oxide catalyst, were reacted with α, ω-bis (10-carboxydecyl) polydimethylsiloxane (PDMS-diacid) leading to the formation of multiblock copolymers. In the one-step method, the reaction components, MDI, IPA, AZA, and PDMS-diacid were reacted all together in DMI in the presence of the catalyst. These polymerizations gave multiblock copolymers having inherent viscosities in the range of 0.36–1.12 dL/g in N,N-dimethylacetamide (DMAc). These multiblock copolymers were soluble in amide-type solvents, and transparent (or translucent) and ductile films could be cast from the solutions in a mixture of DMAc and bis(2-ethoxyethyl) ether. The multiblock copolymers prepared by the two-step method had better-defined, microphase-separated morphology than those obtained by the one-step method. The mechanical properties of PDMS–polyamide multiblock copolymer films were found to be highly dependent on the PDMS content; the tensile strength and modulus of the films decreased with increasing the PDMS content.     

Direct Mass Spectrometric Study of the Ionic Species Content of a C<Subscript>2</Subscript>HCl<Subscript>3</Subscript>/He/O<Subscript>2</Subscript> Microwave Discharge Plasma

Direct on-line studies of a C₂HCl₃/He/O₂ microwave discharge plasma made possible the evolution and detection of many unfamiliar ionic species. Numerous ionic chlorocarbons, chlorohydrocarbons, oxygenated chlorohydrocarbons, oxygenated hydrocarbon radicals, and simple hydrocarbon species were identified mass spectrometrically as by-products: C _m Cl _n (m = 1–4, 6, 8; n = 1–8), C _m H _n Cl _x (m = 1–4, 6, 7, 10; n, x = 1–6), C _m H _n Cl _x O _y (m = 1–5, 12; n = 1–7; x = 1, 2, 4, 6; y = 1–3), C _n H_2n−1O (n = 2, 3), C _m H _n (m = 2, 4, 6, 8; n = 2, 4), and so on. The studies clearly showed the presence of various unfamiliar positive ionic O-containing species such as C₂ClO₂, CCl₃CO, C₂H₂Cl₄O₂, and C₄H₂Cl₆O₃. It is apparent that positive-ion reactions play a significant role in producing many ionic species in the chemistry of C₂HCl₃ plasmas.     

Acyclic diterpene glycosides, capsianosides C, D, E, F and III, from the fruits of hot red pepper Capsicum annuum L. used in Kimchi and their revised structures

Acyclic diterpene glycosides, named capsianosides I', II, III (1), C (2), D (3), E (4) and F (5), have been isolated from the dried hot red pepper fruits of Capsicum annuum L. used in Kimchi. The structures of these compounds have been revised in the sugar connectivities by 1D- and 2D-NMR spectroscopic and chemical methods.     

Photo‐induced Substitutive Introduction of the Aldoxime Functional Group to Carbon Chains: A Formal Formylation of Non‐Acidic C(sp3)−H Bonds

A photo‐induced substitutive introduction of an aldoxime functional group to carbon chains was achieved using photo‐excited 4‐benzoylpyridine as a C(sp³)?H bond cleaving agent and arylsulfonyl oxime as an aldoxime precursor. The non‐acidic C?H bonds in various substances, including cycloalkanes, ethers, azacycles, and cyclic sulfides, were chemoselectively converted at ambient temperature under neutral conditions. The present transformation is a formal formylation of non‐acidic C(sp³)?H bonds in a single step.     

Tomato new sapogenols, isoesculeogenin A and esculeogenin B

Two novel sapogenols, isoesculeogenin A (1) and esculeogenin B (2) of steroidal alkaloid glycosides, lycoperoside F and esculeoside B, respectively, isolated from the ripe tomato have been characterized as (5alpha,22R,23R,25S)-3beta,23,27-trihydroxyspirosolane and (5alpha,22S,23R,25S)-22,26-epimino-16beta,23-epoxy-3beta,23,27-trihydroxycholestane, respectively.