Measurement of non-DLVO force on a silicon substrate coated with ammonium poly(acrylic acid) using scanning probe microscopy

The repulsive force originating from steric hindrance of polymers in aqueous solvent was investigated using scanning probe microscopy (SPM). The contact angle (CA) of ammonium poly(acrylic acid) (PAA) solution on the Si surface was measured to estimate the state of the Si substrate. Results of CA measurement show that the Si surface was fully covered with PAA at 0.1 mass% in aqueous solution. The interaction force between the Si tip and the wafer was estimated using the SPM force curve mode. The force curve measured in the ion-exchanged purified water showed the typical relation predicted by Derjaguin-Landau-Verway-Overbeek (DLVO) theory. However, the force curve shape in the 0.1 mass% PAA solution was significantly different. Only a repulsive force was observed at less than about 4 nm of separation distance between the Si wafer and cantilever tip. This distance originated from the steric repulsions of PAA adsorbed onto the Si wafer and cantilever tip.     

Reaction of 2,3-diaminomaleonitrile with diones

2,3-Diaminomaleonitrile (DAMN) was allowed to react with 2,6-heptanedione to produce (2Z)-2-amino-3-[(1E)-3-methylcyclohex-2-enylideneamino]but-2-enedinitrile and (2Z)-2-amino-3-[(1Z)-3-methylcyclohex-2-enylideneamino]but-2-enedinitrile. The reaction of DAMN with 2,7-octanedione yielded trans-5,8a-dimethyl-1,5a,6,7,8,8a-hexahydrocyclopenta[e]-1,4-diazepine-2,3-dicarbonitrile. DAMN reacted with 2,8-nonanedione to afford trans- and cis-5,9a-dimethyl-5a,6,7,8,9,9a-hexahydro-1H-benzo[e]-1,4-diazepine-2,3-dicarbonitrile. These compounds were characterized by X-ray crystallography, NMR spectroscopy, and DFT calculations.     

Stability of underpotentially deposited Ag layers on a Au(1 1 1) surface studied by surface X-ray scattering

Stability of underpotentially deposited (upd) Ag layers on Au(1 1 1) surface was investigated by surface X-ray scattering (SXS). While the complete pseudomorphic Ag bilayer on Au(1 1 1) surface obtained by upd at 10 mV (vs. Ag/Ag⁺) was maintained its structure even after the circuit was disconnected and the surface was exposed to ambient atmosphere, the pseudomorphic Ag monolayer obtained by upd at 50 mV was converted to a partial bilayer with the coverage of 0.66 and 0.46 ML for the 1st and 2nd layer, respectively. These results show that Ag bilayer is structurally more stable than Ag monolayer on Au(1 1 1) and Ag atoms of the upd monolayer move around on the Au(1 1 1) surface without potential control.     

Hydnellins A and B, nitrogen-containing Terphenyls from the mushrooms Hydnellum suaveolens and Hydnellum geogerirum

Fractionation of methanol extracts of the fruit bodies of two inedible mushrooms Hydnellum suaveolens and Hydnellum geogerirum (Thelephoraceae) resulted in isolation of two new p-terphenyl derivatives named hydnellins A and B and sarcodonin delta possessing N-oxide. Their structures were determined by 2D NMR, IR, UV spectroscopy, and chemical reaction. These terphenyls showed moderate antioxidant activity.     

Two new 15-deoxycimigenol-type and three new 24-epi-cimigenol-type glycosides from Cimicifuga Rhizome

Two new 15-deoxycimigenol-type (1, 2) and three new 24-epi-cimigenol-type glycosides (3-5) were isolated from Cimicifuga Rhizome, and the structures were elucidated on the basis of spectroscopic data including 2D NMR spectra and chemical evidence. The two new 15-deoxycimigenol-type glycosides were the first cimigenol-type glycosides lacking a hydroxyl group at C-15.     

Regular two-dimensional molecular array of photoluminescent Anderson-type polyoxometalate constructed by Langmuir-Blodgett technique

A regular two-dimensional photoluminescent array of Anderson-type polyoxometalates (POMs) was constructed as built-up Langmuir-Blodgett (LB) films. LB films of hexatungstoantimonate (SbW(6)) and -manganate (MnW(6)) were successfully fabricated by using dimethyldioctadecylammonium (DODA) as cationic partner, while hexamolybdochromate (CrMo(6)) was unsuccessful. Specular X-ray reflectivity (SXR) and grazing incidence X-ray diffraction (GIXD) measurements revealed that both SbW(6)/DODA and MnW(6)/DODA LB films exhibited well-ordered layers consisting of periodic arrangement of the planar-structured Anderson-type molecules. Surprising periodicity was observed in SbW(6)/DODA LB film, in which the distance between SbW(6) and DODA layers was 4.40 nm, and SbW(6) anions would form a two-dimensional square lattice with a length of 1.4 nm. SbW(6)/DODA LB films exhibited photoluminescence at 77 K, while emission spectra were observed at room temperature for SbW(6) solid.     

Selective Capture and Collection of Live Target Cells Using a Photoreactive Silicon Wafer Device Modified with Antibodies via a Photocleavable Linker

A device for the capture and recollection of live target cells is described. The platform was a silicon (Si) wafer modified with an anti-HEL antibody (anti-HEL-IgG, HEL = hen egg lysozyme) through a photocleavable 3-amino-3-(2-nitrophenyl)propionic acid (ANP) linker. The modification processes of the Si wafer surface were monitored by Fourier transform infrared spectroscopy-attenuated total reflection (FTIR-ATR) and fast-scanning atomic force microscopy (FS-AFM). The attachment of IgG and its release reaction on the Si surface via the photochemical cleavage of the ANP linker were observed directly by FS-AFM. The results of an enzyme-linked immunosorbent assay (ELISA) indicated that the photorelease of the complex of anti-HEL-IgG with the secondary antibody-alkaline phosphatase hybrid (secondary IgG-AP) from the Si surface occurs with minimum damage. Furthermore, it was possible to collect SP2/O cells selectively that express HEL on their cell membranes (SP2/O-HEL) on the Si wafer device. Photochemical cleavage of the ANP linker facilitated the effective release of living SP2/O cells whose viability was verified by staining experiments using tripan blue. Moreover, it was possible to reculture the recovered cells. This methodology represents an effective strategy for isolating intact target cells in the biological and medicinal sciences and related fields.     

Wetting mode transition of nanoliter scale water droplets during evaporation on superhydrophobic surfaces with random roughness structure

During evaporation, shape changes of nanoliter-scale (80-100 nL) water droplets were evaluated on two superhydrophobic surfaces with different random roughness (nm-coating, μm-coating). The square of the contact radius and the square of the droplet height decreased linearly with evaporation time. However, trend changes were observed at around 170 s (nm-coating) and around 150 s (μm-coating) suggesting a wetting mode transition. The calculated droplet radii for the wetting mode transition from the average roughness distance and the average roughness height of these surface structures were approximately equal to the experimental values at these trend changes. A certain level of correlation between the roughness size and droplet radius at the wetting mode transition was confirmed on surfaces with random roughness.     

Evolved gas analysis of Ti(C5H5)2Cl2 by means of Li+ ion attachment mass spectrometry

Characterization of the compound Ti(C(5)H(5))(2)Cl(2) was studied using Li(+) ion attachment mass spectrometry (IAMS) as an analytical methodology. Since this target compound is used as an anticancer drug in the treatment of leukemia, accurate and rapid monitoring methods for the determination of titanium drugs in a hospital environment are desirable. A quadrupole mass spectrometry system along with a Li(+) ion attachment technique and a direct inlet probe (DIP) produced the Li(+) adduct of Ti(C(5)H(5))(2)Cl(2), Ti(C(5)H(5))(2)Cl(2)Li(+). The DIP also was used to study the temperature-resolved behavior of this compound. The slope of the plot of signal intensity of Ti(C(5)H(5))(2)Cl(2)Li(+) versus temperature for Ti(C(5)H(5))(2)Cl(2) sublimation from 60 to 100 °C was used to determine an apparent activation energy (E(a)) of 124.43 kJ/mol for the sublimation of Ti(C(5)H(5))(2)Cl(2). This value is comparable to the reported value of 118.8 kJ/mol for molar enthalpy of sublimation of Ti(C(5)H(5))(2)Cl(2). These results demonstrate that the IAMS methodology can be used to study the enthalpy of sublimation for d-metal complex materials.     

Photochemically relevant DNA-based molecular systems enabling chemical and signal transductions and their analytical applications

In biology, DNA is the central molecule that stores the genetic information. DNA also has attractive physicochemical features for use as materials in molecular assemblies. DNA is chemically stable and can be prepared in nearly any length and sequence by chemical and enzymatic syntheses. Auxiliary functional groups can be built into the backbone as amidite reagents using automated DNA synthesizers. In addition, we can choose an appropriate method from abundant chemistries for post-modifications. The structures of DNA complexes can be rationally designed by bottom-up self-assembly. Therefore, functional groups can be positioned on the DNA scaffold in distinct distance and spatial arrangements.In the last decade, a number of DNA-based allosteric molecular systems have been reported. Some of the systems function as signal transducers, amplifiers, and chemical catalysts. These systems are rather exciting as fundamental achievements of the studies for nanomachines or nanodevices. They should also be useful as robust molecular sensors for sensitive bioassays. In this review, we will cover the photochemically relevant DNA-based molecular systems. They are classified into three groups: (i) DNA-templated molecular/ion assemblies; (ii) DNA-directed complexation; and (iii) chemical transformations accelerated on DNA.