Spatial study on a multibubble system for sonochemistry by laser-light scattering

Volumetric oscillation of multiple cavitation bubbles in an ultrasonic standing-wave field is investigated spatially through the intensity measurements of scattered light from bubbles changing the measuring position in the direction of sound propagation. When a thin light sheet finer than half of wavelength of sound is introduced into the cavitation bubbles, at an antinode of sound pressure the scattered light intensity oscillates. The peak-to-peak light intensity corresponds to the number of the bubbles which contribute to the sonochemical reaction because the radius for oscillating bubbles at pressure antinodes is restrictive in a certain range due to the shape instability and the action of Bjerknes force that expels from the antinode bubbles that are larger than the resonant size. The experimental results show that the intensity waveform of oscillating scattered light measured at the side near the sound source is similar to the waveform as seen in a single-bubble experiment. The peak-to-peak light intensity for the scattered light waveform is low at the side near the sound source where the progressive wave is dominant, while at the side near the water surface far from the sound source the intensity is relatively high and has periodic structure corresponding to the periodicity of half wavelength from the standing wave. These tendencies of high intensity near the water surface and the periodicity correspond to the periodic luminescent stripes seen in images of luminescence in an ultrasonic standing wave as reported by Hatanaka et al. [Jpn. J. Appl. Phys. 39 (2000) 2962]. The present method of light scattering is promising for evaluating spatial distribution of violently oscillating cavitation bubbles which effect sonochemical reactions.     

Stabilization of enhanced chirality from pyrene-containing l-glutamide lipid in methyl methacrylate by photo-induced polymerization

Enhanced CD spectra based on chirally-oriented structures of pyrene-containing L-glutamic acid-derived lipid were observed in polymerizable monomers and CD strength was maintained after photo-induced polymerization of the monomer solvents.     

NMR and MO Studies on the Molecular Structure of a Fluoranthene-Benzene Complex

Fluoranthene (FA) forms a 1:1 van der Waals complex with benzene in cyclohexane. The ¹H NMR spectrum of this complex shows that the FA moiety in the complex state has five kinds of hydrogen atoms and that the ¹H NMR peaks assigned to the protons attached to the naphthalene skeleton are largely shifted to higher magnetic field on complex formation with benzene. These observations indicate that the complex takes the structure of C_S symmetry, in which the benzene molecule mainly interacts with the electronic system localized on the naphthalene moiety of FA. The present ab initio calculations reproduce well the ¹H NMR spectral shifts mentioned above and the experimentally predicted C_S structure of the complex. According to the PPP calculations for the electronic absorption spectral changes on the complex formation, the FA-benzene complex is considered to take a sandwich type structure.     

Laser terahertz-emission microscope for inspecting electrical faults in integrated circuits

A laser terahertz-emission microscope (LTEM) system is proposed and developed for inspecting electrical faults in integrated circuits (IC). We test a commercial operational amplifier while the system is operating. Two-dimensional terahertz-emission images of the IC chip are clearly observed while the chip is scanned with a femtosecond laser. When one of the interconnection lines is cut, the damaged chip has a LTEM image different from that of normal chips. The results indicate that the LTEM system is a potential tool for IC inspection.     

Time-resolved Auger decay in CsBr using high harmonics

The temperature-dependent decay dynamics of innershell holes in CsBr was measured by using high harmonics. The measured lifetime was as short as 1.5 ps at 340 K due to increasing the Auger-allowed final state density in the Urbach exciton tail, whereas it is 1.1 ns at 10 K, determined by radiative recombination. The temperature-dependent Auger lifetime extrapolated to a high temperature corresponds to the fully energy-allowed Auger decay. In the model to be presented, this yields an interatomic Auger decay lifetime of 2.4+3.8/-1.5 fs, in line with a theoretical calculation for NaF.     

Lateral displacement by transient mobility in chemisorption of CO on Pt(997)

We investigated adsorbed states of CO on Pt(997) at 11 K using infrared reflection absorption spectroscopy. At 11 K, thermal migration is suppressed and thus the initial chemisorption at terrace sites and step sites is controlled by the transient mobility of the adsorbing molecule. The initial occupation ratio between atop CO on the terrace and atop CO at the step is directly determined to be 3.6:1. With a simple isotropic migration model, we estimated the mean lateral displacement from the first impact point to the initial chemisorption site to be 6.8 A. We also discuss the origin of transient mobility of CO on metal surfaces.     

High-brightness 138-W green laser based on an intracavity-frequency-doubled diode-side-pumped Q-switched Nd:YAG laser

Green power of 138 W was generated at an estimated beam quality of M(2) = 11 by intracavity frequency doubling of a diode-pumped Nd:YAG laser. The laser employs a diffusive close-coupled diode-pumping design and a bifocusing-compensation resonator design to ensure stable operation.     

Measurement Accuracy in Phase-Shifting Point Diffraction Interferometer with Two Optical Fibers

A phase-shifting point diffraction interferometer (PS/PDI) with point sources of two single mode optical fibers has been developed, which will be appropriate for the surface figure measurement of large aperture optics on a sub-nanometer scale. To reduce the measurement error factors, a fiber optic plate (FOP) is used as a projection plane for interference pattern. Errors caused by imperfection of optical alignment, such as position of point sources and tilt of FOP, are minimized by analyzing the measured phase data with an original method. Measurement accuracy in the PS/ PDI is estimated with the interference pattern produced by the two optical fiber sources. If inhomogeneity of the FOP and a systematic error of the PS/PDI are eliminated, the measurement accuracy of the present system is estimated to be less than 4nm P-V and 0.7nm rms, respectively, at a measurement wavelength of 632.8 nm.     

Development of novel pyrrole synthesis for the preparation of intermediates of bioactive pyrrole alkaloids

We have developed a novel method for the synthesis of 3,4-diarylpyrrole-2,5-dicarboxylates via α-diazo esters, which are easily obtained from phenylalanine derivatives. Utilizing this method, intermediates of bioactive compounds having the structure of 3,4-diarylpyrrole-2,5-dicarboxylates were synthesized.