Sensing lymphoma cells based on a cell-penetrating/apoptosis-inducing/electron-transfer peptide probe

To electrochemically sense lymphoma cells (U937), we fabricated a multifunctional peptide probe that consists of cell-penetrating/apoptosis-inducing/electron-transfer peptides. Electron-transfer peptides derive from cysteine residue combined with the C-terminals of four tyrosine residues (Y₄). A peptide whereby Y₄C is bound to the C-terminals of protegrin 1 (RGGRLCYCRRRFCVCVGR-NH₂) is known to be an apoptosis-inducing agent against U937 cells, and is referred to as a peptide-1 probe. An oxidation response of the peptide-1 probe has been observed due to a phenolic hydroxyl group, and this response is decreased by the uptake of the peptide probe into the cells. To improve the cell membrane permeability against U937 cells, the RGGR at the N-terminals of the peptide-1 probe was replaced by RRRR (peptide-2 probe). In contrast, RNRCKGTDVQAWY₄C (peptide-3 probe), which recognizes ovalbumin, was constructed as a control. Compared with the other probes, the change in the peak current of the peptide-2 probe was the greatest at low concentrations and occurred in a short amount of time. Therefore, the cell membrane permeability of the peptide-2 probe was increased based on the arginine residues and the apoptosis-inducing peptides. The peak current was linear and ranged from 100 to 1000 cells/ml. The relative standard deviation of 600 cells/ml was 5.0% (n = 5). Furthermore, the membrane permeability of the peptide probes was confirmed using fluorescent dye.     

Photophysical Properties and Efficient,Stable, Electrogenerated Chemiluminescence of Donor–Acceptor Molecules Exhibiting Thermal Spin Upconversion

The photophysical properties and electrogenerated chemiluminescence (ECL) of three donor–acceptor molecules composed of dicyanobenzene and methyl‐, tert‐butyl‐, and phenyl‐substituted carbazolyl groups, 1,2,3,5‐tetrakis(3,6‐disubstituted‐carbazol‐9‐yl)‐4,6‐dicyanobenzene (4CzIPN‐Me, 4CzIPN‐tBu, and 4CzIPN‐Ph, respectively) are described. These molecules show delayed fluorescence as a result of thermal spin upconversion from the lowest triplet state to the lowest singlet state at room temperature. The three molecules showed yellow to yellowish–red ECL. Remarkably, the ECL efficiencies of 4CzIPN‐tBu in dichloromethane reached almost 40 %. Moreover, stable ECL was emitted from 4CzIPN‐tBu and 4CzIPN‐Ph. In case of 4CzIPN‐Me, the ECL intensity decreased during voltage cycles because of polymerization. Quantum chemical calculations revealed that polymerization was inhibited by the steric hindrance of the bulky tert‐butyl and phenyl groups on the carbazolyl moieties and lowered the spin density on the carbazolyl groups through electron conjugation for 4CzIPN‐Ph.     

Control of chain ends of polyesters in polycondensation of AA and BB monomers by use of solid‐phase reagent

For selective synthesis of linear polyester having a functional group at one end, polycondensation between 1,4‐butanediol ( 1a ) and sebacoyl chloride ( 2a ) and between 1,12‐dodecanediol ( 1b ) and isophthaloyl chloride ( 2b ) was conducted in the presence of oxime resin or oxime silica gel, followed by cleavage of the formed polyester from the solid‐phase support with aniline. Matrix‐assisted laser desorption ionization time‐of‐flight mass spectra and ¹H NMR spectra of the cleaved polyester showed that the products contained not only polyester with anilide at one end ( poly 1 ), but also polyester with anilides at both ends ( poly 2 ). The product ratio of poly 1 to poly 2 ( poly 1 / poly 2 ) was dependent on monomers, monomer concentration, feed ratio of monomer to oxime moiety in the support, oxime content in the support, reaction solvent, and the nature of the support. Polyester with a high poly 1 / poly 2 ratio of 81/21 and moderate molecular weight (M_n = 1430 g/mol) was obtained by polycondensation of 1b and 2b in the presence of oxime silica gel in dichloromethane. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1379–1386     

Reductive coupling of hydantoins with benzophenones by low-valent titanium: Synthesis of 4-substituted 1H-imidazol-2(3H)-ones and unusual two-to-two coupled products

The reductive coupling of 1,3-dimethyhydantoin with benzophenones by TiCl₄-Zn in THF gave 4-diarylmethyl-1H-imidazol-2(3H)-ones as four-electron reduced one-to-one coupled products and their dimers as two-to-two coupled products predominantly by controlling the reaction conditions. The reductive coupling of 5-alkyl-1,3-dimethyhydantoins with benzophenones produced 5-alkyl-4-diarylmethyl-1H-imidazol-2(3H)-ones as the sole products irrespective to the reaction conditions. On the other hand, the reductive coupling of 1,3-dimethyhydantoin with cyclic benzophenones selectively 4-arylhydroxymethyl-1H-imidazol-2(3H)-ones as two-electron reduced one-to-one coupled products and they were further reduced to 4-diarylmethyl-1H-imidazol-2(3H)-ones.     

Formation of hydrogenated boron clusters in an external quadrupole static attraction ion trap

We report the formation of icosahedral B(12)H(8) (+) through ion-molecule reactions of the decaborane ion [B(10)H(x)(+) (x=6-14)] with diborane (B(2)H(6)) molecules in an external quadrupole static attraction ion trap. The hydrogen content n of B(12)H(n)(+) is determined by the analysis of the mass spectrum. The result reveals that B(12)H(8)(+) is the main product. Ab initio calculations indicate that B(12)H(8)(+) preferentially forms an icosahedral structure rather than a quasiplanar structure. The energies of the formation reactions of B(12)H(14)(+) and B(12)H(12)(+) between B(10)H(x)(+) (x=6,8) ions, which are considered to be involved in the formation of B(12)H(n)(+), and a B(2)H(6) molecule are calculated. The calculations of the detachment pathway of H(2) molecules and H atoms from the product ions, B(12)H(14)(+) and B(12)H(12) (+), indicate that the intermediate state has a relatively low energy, enabling the detachment reaction to proceed owing to the sufficient reaction energy. This autodetachment of H(2) accounts for the experimental result that B(12)H(8)(+) is the most abundant product, even though it does not have the lowest energy among B(12)H(n)(+).     

Photochemical Reaction Dynamics Measured using the Near-Field Heterodyne Transient Grating Method

The recently developed near-field heterodyne transient grating method was utilized in the analysis of photochemical reaction dynamics. It was applied to the dynamics measurement of the dimerization reaction of anthracene in the temporal range from nanoseconds to milliseconds. By means of wide dynamic range measurements, the relaxation processes of excited states such as the excimer and triplet, and the diffusion process of the photodimer product, could be directly observed. Relative photodimerization efficiency obtained experimentally was compared with the simulation results of the reaction kinetics on the basis of two different reaction schemesreaction by way of the singlet or triplet excited statesand it was confirmed that this reaction occurs through the singlet excited state.     

Crystal structure of a ten-amino acid protein

What is the smallest protein? This is actually not such a simple question to answer, because there is no established consensus among scientists as to the definition of a protein. We describe here a designed molecule consisting of only 10 amino acids. Despite its small size, its essential characteristics, revealed by its crystal structure, solution structure, thermal stability, free energy surface, and folding pathway network, are consistent with the properties of natural proteins. The existence of this kind of molecule deepens our understanding of proteins and impels us to define an "ideal protein" without inquiring whether the molecule actually occurs in nature.     

Quality of twelve clarithromycin dry syrup formulations-bitterness, grittiness and uniformity of drug loading

The objective of the study was to evaluate the bitterness, grittiness and uniformity of drug loading as measures of the quality of 12 formulations of clarithromycin dry syrup (CAMDS), comprising one branded and 11 generic products. Some of the generic CAMDS formulations were more bitter than the branded product while others had similar bitterness when tested as aqueous suspensions. Only one generic product was less bitter than the branded product when tested as a suspension in acidic sports drink. The usual dissolution test described in JP XV could not be used to evaluate the bitterness of the products. A brief dissolution test using only 12.5 ml of water was used to evaluate the bitterness of the products in aqueous suspensions. There were considerable variances in the grittiness of the various products, which were independent of particle size. Changes in grittiness level seemed to be correlated with changes in the intensity of bitterness due to the disintegration of the formulation. Finally, there was less variation in the uniformity of drug loading for the branded product than for the generic products. These data may be useful when selecting which CAMDS formulation to prescribe.     

Swallow-tailed perylene derivative: a new tool for fluorescent imaging of lipid hydroperoxides

A swallow-tailed perylene derivative including a triphenylphosphine moiety was synthesized and applied to the detection and the live-cell imaging of lipid hydroperoxides. The novel probe, named Spy-LHP, reacted rapidly and quantitatively with lipid hydroperoxides to form the corresponding oxide, Spy-LHPOx, which emits extremely strong fluorescence (Phi approximately 1) in the visible range (lambda(em) = 535 nm, 574 nm). Spy-LHP was highly selective for lipid hydroperoxides, and the addition of other reactive oxygen species (ROS) including hydrogen peroxides, hydroxyl radical, superoxide anion, nitric oxide, peroxynitrite, and alkylperoxyl radical, caused no significant increase in the fluorescence intensity. The probe exhibited good localization to cellular membranes and was successfully applied to the confocal laser scanning microscopy (CLSM) imaging of lipid hydroperoxides in live J774A.1 cells, in which lipid peroxidation was proceeded by the stimulation of 2,2-azobis(2-amidinopropane)dihydrochloride (AAPH). These findings establish Spy-LHP as a promising new tool for investigating the physiology of lipid hydroperoxides.     

A fluorescent photochromic compound for labeling biomolecules

A fluorescent photochromic compound, composed of diarylethene, fluorescein and succinimidyl ester units, was developed for the controllable fluorescent labeling of biomolecules based on a small molecule.