Catalytic transformation of methane over in-loaded ZSM-5 zeolite in the presence of ethene

Methane is shown to react with ethene over In-loaded ZSM-5 to higher hydrocarbons such as propene and toluene at around 673 K. Such methane conversion is not catalyzed by proton-exchanged ZSM-5 (H-ZSM-5) under the same conditions, only C2H4 being converted to higher hydrocarbons. By using 13C-labeled methane (13CH4) as a reactant, the reaction paths for the formation of propene, benzene and toluene were examined. 13C-labeled propene (13CC2H6) is formed by the reaction of 13CH4 with C2H4. The lack of 13C-labeled benzene revealed that propene is not transformed to benzene, which instead originates entirely from C2H4. The 13C atom is inserted both into the methyl group and benzene ring in the toluene formed. This indicates that toluene is formed by two reaction paths; the reaction of 13CC2H6 with butenes formed by the dimerization of C2H4 and the reaction of benzene with 13CH4. The existence of the latter path was proved by the direct reaction of 13CH4 with benzene. The reaction of methane with benzene was also carried out in a continuous flow system over In-loaded ZSM-5. The reaction afforded 7.6% and 0.9% yields of toluene and xylenes, respectively, at 623 K.     

Determination of plutonium by solvent extraction—Liquid scintillation method

A combined solvent extraction—liquid scintillation method is suggested for the determination of plutonium. The quenching by twenty four extracting reagents was examined systematically, and the organo phosphorus extractants such as tributylphosphate (TBP), bis-(2-ethyhexyl) phosphoric acid (HDEHP), and tri-n-octylphosphineoxide (TOPO) were shown to be least quenching compared with amines and beta-diketones. Using TOPO, plutonium from 1 ng to 2 μg was determined within 5% of standard deviation, and the detection limit was 3·10⁻¹⁰ g of²³⁹Pu. The quenching by the different ions and the effects of the radioactive elements were also shown.     

Fast separation of oligonucleotide and triplet repeat DNA on a microfabricated capillary electrophoresis device and capillary electrophoresis

A laser-induced fluorescence detection system coupled with a highly sensitive silicon-intensified target (SIT) camera is successfully applied to the imaging of a band for DNA fragment labeling by fluorescence dye in a microchannel, and to the visualizing of the separation process on a microfabricated chip. We demonstrated that an only 6 mm separation channel is sufficient for the separation of triplet repeat DNA fragment and DNA molecular marker within only 12 s. The separation using the microfabricated capillary electrophoresis device is confirmed to be at least 18 times faster than the same separation carried out by conventional capillary electrophoresis with 24.5 cm effective length. The use of a short capillary with 8.5 cm effective length is also efficient for fast separation of DNA; however, the microchip technology is even faster than capillary electrophoresis using a short capillary.     

Dynamic covalent approach to [2]- and [3]roxtanes by utilizing a reversible thiol-disulfide interchange reaction

A dynamic covalent approach to disulfide-containing [2]- and [3]rotaxanes is described. Symmetrical dumbbell-shaped compounds with two secondary ammonium centers and a central located disulfide bond were synthesized as components of rotaxanes. The rotaxanes were synthesized from the dumbbell-shaped compounds and dibenzo-[24]crown-8 (DB24C8) with catalysis by benzenethiol. The yields of isolated rotaxanes reached about 90 % under optimized conditions. A kinetic study on the reaction forming [2]rotaxane 2 a and [3]rotaxane 3 a suggested a plausible reaction mechanism comprising several steps, including 1) initiation, 2) [2]rotaxane formation, and 3) [3]rotaxane formation. The whole reaction was found to be reversible in the presence of thiols, and thermodynamic control over product distribution was thus possible by varying the temperature, solvent, initial ratio of substrates, and concentration. The steric bulk of the end-capping groups had almost no influence on rotaxane yields, but the structure of the thiol was crucial for reaction rates. Amines and phosphines were also effective as catalysts. The structural characterization of the rotaxanes included an X-ray crystallographic study on [3]rotaxane 3 a.     

Subsecond luminescence intensity fluctuations of single CdSe quantum dots

Photoluminescence (PL) intermittency characteristics are examined for single quantum dots (QDs) in a CdSe QD sample synthesized at a slow rate at 75 degrees C. Although the PL quantum efficiency was relatively low ( approximately 0.25), we noticed that the PL intensity of single CdSe QDs fluctuated on a subsecond time scale with short-lived "on" and "off" states. The subsecond PL intensity fluctuations of CdSe QDs are different from "on" and "off" PL blinking generally observed for QDs fluctuating on a millisecond to minute time scale. We characterized single QDs by identifying polarized excitations, topographic imaging using atomic force microscopy (AFM), and transmission electron microscopy (TEM). From analysis of the PL intensity trajectories from >100 single CdSe QDs, the average intermittency time was 213 ms. From the PL quantum efficiency, slow growth of QDs, intensity trajectory analyses, and previous reports relating surface trap states and PL properties of QDs, we attribute the subsecond PL intensity fluctuations of single CdSe QDs and short-lived "on" and "off" states to a high-density distribution of homogeneous surface trap states.     

Simons electrochemical fluorination of substituted homopiperazines(hexahydro-1,4-diazepines) and piperazines

Simons electrochemical fluorination (ECF) of 1,4-dimethyl-1,4-homopiperazine, methyl 4-ethylhomopiperazin-1-ylacetate and 1,4-bis(methoxycarbonylmethyl)-1,4-homopiperazine was studied. For comparison, ECF of three piperazines with a N-(methoxycarbonylmethyl) group(s) was also studied. ECF of 1,4-dimethyl-1,4-homopiperazine gave a low yield of corresponding perfluoro(1,4-dimethyl-1,4-homopiperazine) together with perfluoro(2,6-diaza-2,6-dimethylheptane) as the major product. Corresponding perfluoro(homopiperazines) with mono- and/or di-(fluorocarbonyldifluoromethyl) groups [CF₂C(O)F] at the 1- and/or 4-position were formed in low yields from methyl 4-ethylhomopiperazin-1-ylacetate and 1,4-bis(methoxycarbonylmethyl)-1,4-homopiperazine, respectively. These new seven-membered perfluoro(1,4-dialkyl-1,4-homopiperazines) were accompanied by the formation of mono- and/or di-basic linear perfluoroacid fluorides resulting from the CC bond scission at the 2- and 3-positions of the ring. From mono- and/or di-N-(methoxycarbonylmethyl)-substituted piperazines, corresponding perfluoropeperazines having the acid fluoride group(s) were formed in low yields.     

Inhibitory effects of 3,3',4,5'-tetrahydroxystilbene and 3,3',4,5'-tetrahydroxybibenzyl, the constituents of Cassia garrettiana on antigen-induced histamine release in vitro.

3,3',4,5'-Tetrahydroxystilbene (I) and 3,3',4,5'-tetrahydroxybibenzyl (II), isolated from the heartwood of Cassia garrettiana Craib (Leguminosae), showed inhibitory effects on antigen-induced histamine release from rat peritoneal mast cells in vitro. The inhibitory effect of I (IC50 = 30.2 microM) was much stronger than that of II (greater than 100 microM). Compound II, as well as I (IC50 = 7.3 microM) reported previously, also inhibited the histamine release from human peripheral basophils induced by anti-immunoglobulin E (IgE) in vitro, and its IC50-value was 68.0 microM. These results suggest that the trans-olefin structure in the molecule may be necessary for I to have an inhibitory effect on histamine release. Considering that disodium cromoglycate did not show any significant inhibitory effect on anti-IgE-induced histamine release from human basophils, the strong inhibitory effects of I in both tests are of considerable interest.     

High-Performance Liquid Chromatographic Characterization of the Role of Inorganic Pyrophosphatase in Regulating the Reaction of Uridine 5′-Triphosphate with Glucose 1-Monophosphate

Abstract

Inorganic pyrophosphatase (EC 3. 6. 1. 1) drived the reaction of uridine 5′-triphosphate with glucose 1-monophosphate in the direction of uridine 5′-diphosphoglucose formation.     

Synthesis of novel 4′-C-methyl-1′,3′-dioxolane pyrimidine nucleosides and evaluation of its anti-HIV-1 activity

The key glycosyl donor for the target molecule 12 was prepared by two-step sequences; (1) acetalization of tert-butyldimethylsilyloxyacetaldehyde with 3-bromopropanediol, (2) DBN-initiated β-elimination of the resulting 2-(tert-butyldimethylsilyloxy)methyl-4-bromomethyl-1,3-dioxolane 11. Electrophilic glycosidation between 12 and silylated pyrimidine nucleobase proceeded efficiently to provide a mixture of β- and α-anomers of the respective glycosides 14 and 15. Tin radical-mediated reduction of the bromomethyl functional group of 14 and 15 gave protected 4′-C-methyl-dioxorane uracil- 16 and thymine nucleoside 17. The respective cytosine nucleoside 18 was synthesized from 16. De-silylation of 4′-methyl-1′,3′-dioxolane pyrimidine nucleosides 16–18 gave the target molecules. Evaluation of the anti-HIV-1 activity of the β- and α-anomers of the novel 4′-C-methyl-1′,3′-dioxolane nucleosides 22β,α–24β,α revealed that none of the nucleoside derivatives possess anti-viral activity against HIV-1 and show cytotoxicity against MT-4 cells at 100 μM.     

Activation cross-sections of longer lived products of proton induced nuclear reactions on cobalt up to 70 MeV

As a part of our series of studies on charged particle induced reactions on various target materials, proton induced excitation functions on natural cobalt have been determined by using the stacked-foil technique. In these measurements the radionuclides ^55,56,57,58Co, ⁵¹Cr, ^52,54,56Mn and ^56,57Ni have been identified. For the above mentioned nuclides the cross-sections were derived from the measured activities and were compared with the literature data and with the results of EMPIRE code calculations and tabulated values in the TENDL 2011 library (based on TALYS code calculations). The agreement with previous measurements and with theoretical values was acceptable.