Protein-templated organic/inorganic hybrid materials prepared by liquid-phase deposition

Organic/inorganic hybrid thin films for protein recognition have been prepared by the liquid-phase deposition (LPD) coupled with template synthesis, i.e., molecular imprinting, where pepsin (Pep) was used as a model protein and titanium oxide was deposited on gold substrates in the presence of Pep-poly-L-lysine (PL) complexes. The complexes remained in the templated film after the deposition, and the binding sites for Pep were constructured after Pep was removed from the film. Surface plasmon resonance signals on the deposited films were measured to examine the binding behaviors toward proteins. The binding of Pep on the templated film was reversible, and the binding isotherm of Pep depicted a saturation curve with a binding constant of 7.3 x 105 M(-1), which was 10 times higher than that of albumin. In contrast, titanium oxide films prepared without PL did not show any selectivity; therefore, the hybridization of PL as the organic binder with the inorganic material is necessary to obtain selective binding sites for Pep. It was also shown that the hybridization process should proceed without denaturing the template protein, in order to obtain selective binding sites for the template. The procedure for preparation of the films was simple to perform, and the process for hybridization of the thin films with nanometer-order thickness was easily controlled by changing the LPD reaction time period. Consequently, the proposed LPD coupled with template synthesis is among the most appropriate methods to prepare hybrid materials with protein recognition ability, which proceeds under mild conditions in aqueous solution.     

Surface plasmon resonance sensor for lysozyme based on molecularly imprinted thin films

Molecularly imprinted polymers (MIPs) selective for lysozyme were prepared on SPR sensor chips by radical co-polymerization with acrylic acid and N,N′-methylenebisacrylamide. Gold-coated SPR sensor chips were modified with N,N′-bis(acryloyl)cystamine, on which MIP thin films were covalently conjugated. The presence of NaCl during the polymerization and the re-binding tests affected the selectivity and the optimization of NaCl concentration in the pre-polymerization mixture and the re-binding buffer could enhance the selectivity in the target protein sensing. When the lysozyme-imprinted polymer thin films were prepared in the presence of 40 mM NaCl, the selectivity factor (target protein bound/reference protein bound) of MIP in the re-binding buffer containing 20 mM NaCl was 9.8, meanwhile, that of MIP in the re-binding buffer without NaCl was 1.2. A combination of SPR sensing technology with protein-imprinted thin films is a promising tool for the construction of selective protein sensors.     

External electric field effects on absorption, fluorescence, and phosphorescence spectra of diphenylpolyynes in a polymer film

External electric field effects on absorption, fluorescence, and phosphorescence spectra of a series of unsubstituted diphenylpolyynes have been examined in a PMMA film. The analysis of the electroabsorption spectra indicates that the shorter diphenylpolyynes exhibit only the change in molecular polarizability, whereas the longer ones exhibit the change both in dipole moment and in molecular polarizability following absorption. The finding of the change in dipole moment following absorption of centrosymmetric diphenylpolyynes is interpreted in terms of the symmetry distortion upon doping a polymer film. When the external electric field is applied, the fluorescence yield is reduced and enhanced, respectively, in diphenylacetylene and diphenyloctatetrayne, indicating that the rate of the nonradiative process from the fluorescence state is accelerated in diphenylacetylene and decelerated in diphenyloctatetrayne by an external electric field. All of the diphenylpolyynes used in the present study exhibit the change in molecular polarizability following the phosphorescence process.     

Evolution of Structure of the Precursor During Sol-Gel Processing of ZnO and Low Temperature Formation of Thin Films

ZnO thin films were prepared on silicon substrate with Pt electrode by the sol-gel processing using Zn alkoxide solution prepared from Zn(NO₃)₂·6H₂O and 2-methoxyethanol. FT-IR spectroscopy showed the presence of Zn species in the alkoxide, with methoxyethoxide and nitrato groups as coordination ligands, indicating formation of Zn(NO₃)(OCH₂CH₂OCH₃). Smooth and homogeneous thin films were obtained by heat treating coating gel films in the temperature range from 250 to 500°C. The ZnO thin films exhibited a preferred growth of crystals with c-axis perpendicular to the Si substrate surface when fired at 250°C. It was discussed that the presence of nitrogen atoms in precursors had affected the phase development of crystals and was the basis of the structural relaxation for crystallization at low temperature.     

How Is the Local-scale Gravitational Instability Influenced by the Surrounding Large-scale Structure Formation?

We develop the formalism to investigate therelation between the evolution of the large-scale(quasi) linear structure and that of the small-scalenonlinear structure in Newtonian cosmology within theLagrangian framework. In doing so, we first derive thestandard Friedmann expansion law using the averagingprocedure over the present horizon scale. Then thelarge-scale (quasi) linear flow is defined by averaging the full trajectory field over a large-scaledomain, but much smaller then the horizon scale. Therest of the full trajectory field is supposed todescribe small-scale nonlinear dynamics. We obtain the evolution equations for the large-scale andsmall-scale part of the trajectory field. These arecoupled each other in most general situations. It isshown that if the shear deformation of fluid elements is ignored in the averaged large-scaledynamics, the small-scale dynamics is described byNewtonian dynamics in an effectiveFriedmann-Robertson-Walker (FRW) background with a localscale factor. The local scale factor is defined by the sum of theglobal scale factor and the expansion deformation of theaveraged large-scale displacement field. This means thatthe evolution of small-scale fluctuations is influenced by the surrounding large-scale structurethrough the modification of FRW scale factor. The effectmight play an important role in the structure formationscenario.     

Nano-crater formation on a Si(1 1 1)-(7 × 7) surface by slow highly charged ion-impact

Using scanning tunneling microscopy (STM) and time of flight secondary ion mass spectrometry (TOF/SIMS), we observed radiation effects on a Si(1 1 1)-(7 × 7) surface in the collision of a single highly charged ion (HCI) with a charge state q up to q = 50. The STM observation with atomic resolution revealed that a nanometer sized crater-like structure was created by a single HCI impact, where the size increased rapidly with q. The secondary ion yields also increased with q in which multiply charged Si ions (Siⁿ⁺) were clearly observed in higher q HCI-collisions. The sputtering mechanism is briefly discussed, based on the so-called Coulomb explosion model.     

Effect of thermal treatment on the photocatalytic degradation of ethylene,trichloroethylene, and chloroform

The thermal treatment of TiO₂ pellets prepared by the sol–gel method decreased the photocatalytic activity. The activity divided by the specific surface area of the pellets for the complete mineralization of ethylene or chloroform was maximized at the firing temperature of 400°C. For the photocatalytic degradation of trichloroethylene (TCE), most of them were converted to chlorinated by-products, such as dichloroacetic acid, chloroform, and phosgene, and the stoichiometric ratio of [CO₂]_formed/[TCE]_degraded showed a maximal value at 400°C. The electron spin resonance (ESR) spin-trapping with 5,5-dimethyl-1-pyrroline-N-oxide (DMPO) in the flow injection system indicated that firing at 400°C gave the highest signal intensity of DMPO–OH adducts. These findings indicated that the OH radical was produced most effectively on the TiO₂ fired at 400°C, which would be related to the content of anatase and rutile. Concerning the formation of chlorinated by-products from TCE, more dichloroacetic acid (DCAA) were detected and less CHCl₃ and COCl₂ were formed at lower firing temperatures, suggesting that the branching ratio of chloroethoxy radicals to the formation of DCAA or CHCl₃ and COCl₂ by C–C bond scission depended on the firing temperature.     

Catalytic hydrogenation of CO and CN bonds via heterolysis of H2 mediated by metal-sulfur bonds of rhodium and iridium thiolate complexes

Coordinatively unsaturated rhodium and iridium complexes having a bulky thiolate, [Cp∗M(PMe₃)(SDmp)](BAr^F₄) (1a: M = Rh; 1b: M = Ir; Dmp = 2,6-(mesityl)₂C₆H₃, Ar^F = 3,5-(CF₃)₂C₆H₃), catalyzed the hydrogenation of benzaldehyde, N-benzylideneaniline, and cyclohexanone, under 1 atm of H₂ at low temperatures. In these catalytic reactions, the M-H/S-H complexes [Cp∗M(PMe₃)(H)(HSDmp)](BAr^F₄) (2a: M = Rh; 2b: M = Ir) generated via H₂ heterolysis by 1a or 1b were suggested to transfer both M-H hydride and S-H proton to substrates. The catalytic reactions were terminated by the dissociation of H-SDmp from the metal centers of 2a and 2b that occurs at ambient temperature under H₂ atmosphere.