Output and picosecond amplification characteristics of an efficient and high-power discharge excimer laser

Improvements in output pulse energy and efficiency of a conventional capacitor-transfer-type discharge excimer laser with automatic preionization have been achieved by extending the discharge volume and resulting moderate pumping of the active medium. The discharge laser produces a pulse energy of more than 1 J for XeCl, KrF, and ArF lasers in square beams of about 2×2 cm², and the maximum overall efficiency observed is 2.9% for XeCl, 3.2% for KrF and 1.8% for ArF. The laser device has been involved in a picosecond ( 32 ps) XeCl laser amplification system, and was operated as an amplifier at a repetitive frequency of 10 Hz. Saturation fluence for XeCl laser was measured to be 1.4 mJ/cm², and the picosecond pulse energy of 40 mJ was extracted from the amplifier.On leave from Ebara Corp., 6-6-7, Ginza, Chuo-ku, Tokyo 104, JapanOn leave from Mitsubishi Heavy Industries, LTD., 4-6-22, Kan-on shinmachi, Nishi-ku, Hiroshima 733, Japan     

Preparation of prolonged-release spherical micro-matrix of ibuprofen with acrylic polymer by the emulsion-solvent diffusion method for improving bioavailability

Prolonged-release spherical micro-matrices of ibuprofen with acrylic polymer (Eudragit RS) were prepared using a novel emulsion-solvent diffusion method. It was found by examining cross sections of the spherical matrix before and after dissolution tests with a scanning electron microscope and a porosimeter that the resultant micro-matrix had a sponge-like internal structure. The spherical matrices were successfully recovered with a relatively high concentration of the drug in ethanol (0.4-0.6 g/ml) and over a wide range of temperatures (5-35 degrees C). The size of the spherical matrix could be easily controlled by varying the agitation speed of the system and the concentration of emulsifier added to the aqueous medium. The drug release rate from the spherical matrix decreased with increasing concentration of polymer formulated due to the reduced diffusion path and increased tortuosity in the matrix. Spherical matrices with ibuprofen:Eudragit RS = 3:1 improved the bioavailability of the drug and prolonged the drug action in beagle dogs.     

Highly sensitive spectrophotometric determination of osmium(VIII) with pyrogallolphthalein and hydrogen peroxide in the presence of Brij 35

Summary A highly sensitive determination of osmium(VIII) is based on the decolouring reaction with pyrogallolphthalein (gallein) and hydrogen peroxide in the presence of Brij 35. Beer's law was obeyed in the range of 0–0.5 ng of osmium(VIII) per 10 ml and the apparent decomposed absorption coefficient was 2.5×10⁹ l mol^–1 cm^–1 at 535 nm.Application of xanthene derivatives in analytical chemistry. Part XCIII. Part XCII see ref. [1]     

Rate constants of the O(D) reactions with N2, O2, N2O, and H2O at 295 K

Using a technique of laser flash photolysis coupled with vacuum ultraviolet laser-induced fluorescence spectroscopy, the rate coefficients of O(¹D) reactions with N₂, O₂, N₂O, and H₂O at 295 ± 2 K have been determined to be , k_O2=(4.06±0.24)×10^-11, k_N2O=(1.35±0.08)×10^-10 and . The quoted uncertainties include estimated errors and are the 95% confidence level. The k_N2 and k_N2O values obtained are larger than the current NASA/JPL recommendations by 26% and 16%, respectively, although they are still within the error limits associated with the recommendations.     

Red–Green–Blue Trichromophoric Nanoparticles with Dual Fluorescence Resonance Energy Transfer: Highly Sensitive Fluorogenic Response Toward Polyanions

A red–green–blue (RGB) trichromophoric fluorescent organic nanoparticle exhibiting multi‐colour emission was constructed; the blue‐emitting cationic oligofluorene nanoparticle acted as an energy‐donor scaffold to undergo fluorescence resonance energy transfer (FRET) to a red‐emitting dye embedded in the nanoparticle (interior FRET) and to a green‐emitting dye adsorbed on the surface through electrostatic interactions (exterior FRET). Each FRET event occurs independently and is free from sequential FRET, thus the resultant dual‐FRET system exhibits multi‐colour emission, including white, in aqueous solution and film state. A characteristic white‐emissive nanoparticle showed visible responses upon perturbation of the exterior FRET efficiency by acceptor displacement, leading to highly sensitive responses toward polyanions in a ratiometric manner. Specifically, our system exhibits high sensitivity toward heparin with an extremely low detection limit.     

Synthesis and some Physical Properties of 1-Cyclohexyl-2-(4”-Halobiphenyl-4'-yl)Ethanes

A series of 1-(trans-4'-n-alkylcyclohexyl)-2-(4”-halobiphenyl-4'-yl)ethanes, which show nematic phases, was prepared. Their transition temperatures, enthalpies and entropies were measured. Their bulk viscosities, birefringences and dielectric constants were determined by extrapolation. 1-(trans-4'-n-propylcyclohexyl)-2-(4”-fluorobiphenyl-4'-yl)ethane has a high clearing of 125° C, a low viscosity of 25 c.p. at 20 °C, a relatively high birefringence of 0.166 at 25 °C, and a positive dielectric anisotropy of 4.9. The transition temperatures, the N-I transition entropies, the bulk viscosities and the birefringences for the 1-(trans-4'-n-alkylcyclohexyl)-2-(4”-fluorobiphenyl-4'-yl)ethanes exhibited odd-even effects in relation to the number of carbon atoms in the alkyl chain. The bulk viscosity as a function of the third power of the van der Waals radius of the halogeno group, the birefringence as a function of the van der Waals radius of the halogeno group, and the dielectric constants as a function of the dipole moment of the halogeno group are discussed for the 1-(trans-4'-n-propylcyclohexyl)-2-(4”-halobiphenyl-4'-yl)ethanes.     

Synthesis of end‐functionalized polyethers by phosphazene base‐catalyzed ring‐opening polymerization of 1,2‐butylene oxide and glycidyl ether

For the living ring‐opening polymerization (ROP) of epoxy monomers, the catalytic activity of organic superbases, tert‐butylimino‐tris(dimethylamino)phosphorane, 1‐tert‐butyl‐2,2,4,4,4‐pentakis(dimethylamino)‐2Λ⁵,4Λ⁵‐catenadi(phosphazene), 2,8,9‐triisobutyl‐2,5,8,9‐tetraaza‐1‐phosphabicyclo[3.3.3]undecane, and 1‐tert‐butyl‐4,4,4‐tris(dimethylamino)‐2,2‐bis[tris(dimethylamino)phosphoranylidenamino]‐2Λ⁵,4Λ⁵‐catenadi(phosphazene) (t‐Bu‐P₄), was confirmed. Among these superbases, only t‐Bu‐P₄ showed catalytic activity for the ROP of 1,2‐butylene oxide (BO) to afford poly(1,2‐butylene oxide) (PBO) with predicted molecular weight and narrow molecular weight distribution. The results of the kinetic, post‐polymerization experiments, and MALDI‐TOF MS measurement revealed that the t‐Bu‐P₄‐catalyzed ROP of BO proceeded in a living manner in which the alcohol acted as the initiator. This alcohol/t‐Bu‐P₄ system was applicable to the glycidol derivatives, such as benzyl glycidyl ether (BnGE) and t‐butyl glycidyl ether, to afford well‐defined protected polyglycidols. The α‐functionalized polyethers could be obtained using different functionalized initiators, such as 4‐vinylbenzyl alcohol, 5‐hexen‐1‐ol, and 6‐azide‐1‐hexanol. In addition, the well‐defined cyclic‐PBO and PBnGE were successfully synthesized using the combination of t‐Bu‐P₄‐catalyzed ROP and click cyclization. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012