Interaction of highly charged ions with carbon-based materials using Kobe EBIS

Interaction of highly charged ions (HCIs) with surfaces produce various specific phenomena as a consequence of the potential energy that HCI possesses. In the present study, we have observed photon emission, structural, magnetic, and electronic modification on various carbon-based materials such as carbon nanotube by the impact of HCIs using an electron beam ion source named Kobe EBIS installed at the Kobe University. In order to study the potential effect, HCIs of Ar^q+ (q = 6–16) with the intensity of 0.1–1 nA are projected on the surface with a constant kinetic energy (16 keV). For photon emission measurements, we observed spatial and spectral distribution of visible light emission from the surface during irradiation with HCIs. On the other hand, the structural modification of multi-walled carbon nanotubes (MWCNTs) irradiated with HCIs has been analyzed using a transmission electron microscopy and Raman spectroscopy. Irradiation effects on the resistivity of single MWCNT supported on micrometer scale bridge pattern were also measured. We have also measured magnetic structure of highly oriented pyrolytic graphite irradiated with HCIs using electron spin resonance at low temperature. At the present paper, we will review our recent experimental results on the interaction of HCI with various carbon-based materials.     

Effect of chain architecture on the phase transition of star and cyclic poly(N‐isopropylacrylamide) in water

The heat‐induced phase transition of aqueous solutions of Poly(N‐isopropylacrylamide) (PNIPAM) in water is examined for a four‐arm PNIPAM star (s‐PNIPAM), a cyclic PNIPAM (c‐PNIPAM), and their linear counterparts (l‐PNIPAM) in the case of polymers (1.0 g L^?1) of 12,700 g mol^?1 < M_n < 14,700 g mol^?1. Investigations by turbidity, high‐sensitivity differential scanning calorimetry (HS‐DSC), and light scattering (LS) indicate that the polymer architecture has a strong effect on the cloud point (T_c: decrease for s‐PNIPAM; increase for c‐PNIPAM), the phase transition enthalpy change (ΔH decrease for s‐PNIPAM and c‐PNIPAM), and the hydrodynamic radius of the aggregates formed above T_c (R_H: c‐PNIPAM < s‐PNIPAM < l‐PNIPAM). The properties of s‐PNIPAM are compared with those of previously reported PNIPAM star polymers (3 to 52 arms). The overall observations are described in terms of the arm molecular weight and the local chain density in the vicinity of the core of the star, by analogy with the model developed for PNIPAM brushes on nanoparticles or planar surfaces. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 2059–2068.     

Interlaboratory evaluation of two enzyme-linked immunosorbent assay kits for the determination of crustacean protein in processed foods

The labeling of foods containing material derived from crustaceans such as shrimp and crab is to become mandatory in Japan because of increases in the number of allergy patients. To ensure proper labeling, 2 novel sandwich enzyme-linked immunosorbent assay (ELISA) kits for the determination of crustacean protein in processed foods, the N kit (Nissui Pharmaceutical Co., Ltd, Ibaraki, Japan) and the M kit (Maruha Nichiro Holdings, Inc., Ibaraki, Japan), have been developed. Five types of model processed foods containing 10 and/or 11.9 microg/g crustacean soluble protein were prepared for interlaboratory evaluation of the performance of these kits. The N kit displayed a relatively high level of reproducibility relative standard deviation (interlaboratory precision; 4.0-8.4% RSDR) and sufficient recovery (65-86%) for all the model processed foods. The M kit displayed sufficient reproducibility (17.6-20.5% RSDR) and a reasonably high level of recovery (82-103%). The repeatability relative standard deviation (RSDr) values regarding the detection of crustacean proteins in the 5 model foods were mostly < 5.1% RSDr for the N kit and 9.9% RSDr for the M kit. In conclusion, the results of this interlaboratory evaluation suggest that both these ELISA kits would be very useful for detecting crustacean protein in processed foods.     

Kinetic analysis of superoxide anion radical-scavenging and hydroxyl radical-scavenging activities of platinum nanoparticles

There are few reports on the physiological effects of metal nanoparticles (nps), especially with respect to their functions as scavengers for superoxide anion radical (O2(.-)) and hydroxyl radical (.OH). We tried to detect the scavenging activity of Pt nps using a hypoxanthine-xanthine oxidase system for O2(.-) and using a Fenton and a UV/H2O2 system for .OH. Electron spin resonance analysis revealed that 2 nm particle size Pt nps have the ability to scavenge O2(.-) and .OH. The calculated rate constant for the O2(.-)-scavenging reaction was 5.03 +/- 0.03 x 10(7) M (-1) s (-1). However, the analysis of the Fenton and UV/H 2O 2 system in the presence of Pt nps suggested that the .OH-scavenging reaction cannot be determined in both systems. Among particle sizes tested from 1 to 5 nm, 1 nm Pt nps showed the highest O2(.-)-scavenging ability. Almost no cytotoxicity was observed even after adherent cells (TIG-1, HeLa, HepG2, WI-38, and MRC-5) were exposed to Pt nps at concentrations as high as 50 mg/L. Pt nps scavenged intrinsically generated reactive oxygen species (ROS) in HeLa cells. Additionally, Pt nps significantly reduced the levels of intracellular O2(.-) generated by UVA irradiation and subsequently protected HeLa cells from ROS damage-induced cell death. These findings suggest that Pt nps may be a new type of antioxidant capable of circumventing the paradoxical effects of conventional antioxidants.     

Facile Formation of Sulfurized Nanorod-Like ZnO/Zn(OH)2 and Hierarchical Flower-Like γ-Zn(OH)2/ϵ-Zn(OH)2 from a Green Synthesis and Application as Luminescent Solar Concentrator

This research endeavors to overcome the significant challenge of developing materials that simultaneously possess photostability and photosensitivity to UV-visible irradiation. Sulfurized nanorod (NR)-like ZnO/Zn(OH)₂ and hierarchical flower-like γ-Zn(OH)₂/ϵ-Zn(OH)₂ were identified from XRD diffraction patterns and Raman vibrational modes. The sulfurized material, observed by FEG-SEM and TEM, showed diameters ranging from 10 and 40 nm and lengths exceeding 200 nm. The S²⁻ ions intercalated Zn²⁺, modulating NRs to dumbbell-like microrods. SAED and HRTEM illustrated the atomic structure in (101) crystal plane. Its direct band gap of 3.0 eV was attributed to the oxygen vacancies, which also contribute to the deep-level emissions at 422 and 485 nm. BET indicated specific surface area of 4.4 m² g⁻¹ and pore size as mesoporosity, which are higher compared to the non-sulfurized analogue. These findings were consistent with the observed photocurrent, photostability and photoluminescence (PL), further supporting the suitability of sulfurized NR-like ZnO/Zn(OH)₂ as a promising candidate for Luminescent solar concentrators (LSC)-photovoltaic (PV) system.     

A Programmable Signaling Molecular Recognition Nanocavity Prepared by Molecular Imprinting and Post‐Imprinting Modifications

Inspired by biosystems, a process is proposed for preparing next‐generation artificial polymer receptors with molecular recognition abilities capable of programmable site‐directed modification following construction of nanocavities to provide multi‐functionality. The proposed strategy involves strictly regulated multi‐step chemical modifications: 1) fabrication of scaffolds by molecular imprinting for use as molecular recognition fields possessing reactive sites for further modifications at pre‐determined positions, and 2) conjugation of appropriate functional groups with the reactive sites by post‐imprinting modifications to develop programmed functionalizations designed prior to polymerization, allowing independent introduction of multiple functional groups. The proposed strategy holds promise as a reliable, affordable, and versatile approach, facilitating the emergence of polymer‐based artificial antibodies bearing desirable functions that are beyond those of natural antibodies.     

Photoresponsive porphyrin-imprinted polymers prepared using a novel functional monomer having diaminopyridine and azobenzene moieties

A novel photoresponsive functional monomer bearing diaminopyridine and azobenzene moieties was synthesized and applied to the preparation of photo-regulated molecularly imprinted polymers, which can recognize porphyrin derivatives through hydrogen bonding. The binding affinity of the imprinted cavities was regulated by UV irradiation, suggesting that azobenzene groups located inside the binding sites worked as photosensitizers and the trans-cis isomerization could regulate the affinity for the target compounds. Repetitive binding of the target compound to trans-IP and cis-IP was directly monitored by slab optical waveguide spectroscopy and the photo-mediated regulation of binding affinity was successfully confirmed.     

Protein-templated organic/inorganic hybrid materials prepared by liquid-phase deposition

Organic/inorganic hybrid thin films for protein recognition have been prepared by the liquid-phase deposition (LPD) coupled with template synthesis, i.e., molecular imprinting, where pepsin (Pep) was used as a model protein and titanium oxide was deposited on gold substrates in the presence of Pep-poly-L-lysine (PL) complexes. The complexes remained in the templated film after the deposition, and the binding sites for Pep were constructured after Pep was removed from the film. Surface plasmon resonance signals on the deposited films were measured to examine the binding behaviors toward proteins. The binding of Pep on the templated film was reversible, and the binding isotherm of Pep depicted a saturation curve with a binding constant of 7.3 x 105 M(-1), which was 10 times higher than that of albumin. In contrast, titanium oxide films prepared without PL did not show any selectivity; therefore, the hybridization of PL as the organic binder with the inorganic material is necessary to obtain selective binding sites for Pep. It was also shown that the hybridization process should proceed without denaturing the template protein, in order to obtain selective binding sites for the template. The procedure for preparation of the films was simple to perform, and the process for hybridization of the thin films with nanometer-order thickness was easily controlled by changing the LPD reaction time period. Consequently, the proposed LPD coupled with template synthesis is among the most appropriate methods to prepare hybrid materials with protein recognition ability, which proceeds under mild conditions in aqueous solution.