Diastereoselective total synthesis of isocarbacyclin from L-ascorbic acid

Diastereoselective total synthesis of isocarbacyclin, which features a fused bicyclic key intermediate available from l-ascorbic acid, is described. The key intermediate was prepared in multigram quantities by the Pauson-Khand reaction of l-ascorbic acid-based (R)-4,4-diallyl-2,2-dimethyl-5-(trimethylsilyl)ethynyl-1,3-dioxolane (3), discriminating diastereotopic groups and faces of the geminal allyl substituents.     

Electromagnetic response of static and fluctuating stripes in cuprate superconductors

Using infrared spectroscopy, we found that changes in the in-plane charge dynamics attributable to static stripe order in La(1.275)Nd(0.6)Sr(0.125)CuO(4) or superconductivity in La(1.875)Sr(0.125)CuO(4) are confined to energies smaller than 100 cm(-1). An absorption peak in the low- omega conductivity of the Nd-doped compound is suggestive of localization effects due to the reduced dimensionality of static charge stripes. Neither superconductivity nor static stripe ordering has a noticeable effect on the depression of the scattering rate at omega<1000 cm(-1) characteristic of the pseudogap state in other classes of moderately doped cuprates.     

Inclusion Behavior of 4-Nonylphenol into Cyclodextrin Derivatives

The solubilities of 4-nonylphenol in five kinds of hydroxypropyl-cyclodextrin (HP-CDs) solutions were investigated in order to evaluate them for soil remediation. The relative aqueous-phase concentration of 4-nonylphenol linearly increased with the increasing HP-CD concentration. The addition of HP-beta-CD (degree of substitution, D.S.=0.6) produced the largest change because the inner core of HP-beta-CD is the most hydrophobic. The solubility of 4-nonylphenol in the HP-CD solutions depended upon the cavity diameter and the degree of HP-CD substitution. Both ozone and activated carbon treatments have been using for removing organic compounds and foul odor compounds from tap water. As the inclusion complexes moved into the groundwater, the ozone degradation of the inclusion complexes was estimated. The 4-nonylphenol-HP-CD inclusion complexes were easily degraded by ozone. The degree of degradation increased with the increasing ozonization time. Weakly acidic compounds were produced from the 4-nonylphenol-HP-CD inclusion complexes by ozonization. HP-CDs could be used for the removal of 4-nonylphenol from soil. Copyright 2001 Academic Press.     

Charge microheterogeneity of the beta-trace proteins (lipocalin-type prostaglandin D synthase) in the cerebrospinal fluid of patients with neurological disorders analyzed by capillary isoelectrofocusing.

Charge microheterogeneity of the beta-trace protein (beta-TP = lipocalin-type prostaglandin D synthase) in the cerebrospinal fluid (CSF) of patients with various neurological disorders was analyzed by capillary isoelectric focusing (CIEF). Under the conditions employed, beta-TP in the low-molecular-weight protein fraction of CSF was separated into at least four isoforms with different p/ values. An isoform with the pl value of 4.6-4.8 was usually the most abundant. The total beta-TP level in the CSF was determined by enzyme-linked immunosorbent assay (ELISA) to be elevated in patients recovering from organic damage to the CNS and those with pathological brain atrophy. Changes in the total beta-TP level in the CSF were occasionally accompanied by those in its charge microheterogeneity, as revealed by CIEF. Such quantitative and qualitative changes in beta-TP in human CSF indicated changes in its pathophysiological roles in association with various neurological disorders.     

A theoretical study on the alkali metal carboxylate-promoted L-Lactide polymerization

Sodium acetate-catalyzed L-lactide polymerization reaction is a simple yet efficient reaction. It provides a robust system to produce poly(L-lactide) in industrial scale. In this study, the mechanism of this reaction has been studied by means of computational chemistry tools based on the experimental results. Basically, the mechanism consists of two steps: lactide coordination and ring opening through O-Acyl bond cleavage. Additionally, the effect of cation size and substituent on carboxylate moiety have been evaluated. The calculations indicate that the larger cation leads to faster reactions. Moreover, the stronger electron-donating group on carboxylate moiety accelerates the reaction rates. To obtain further insights, an orbital analysis has been also carried out. Our calculations are consistent with experimental findings and clarify underlying mechanistic features of the present reaction.     

Synthesis and chiral recognition of helical poly(phenylacetylene)s bearing l‐phenylglycinol and its phenylcarbamates as pendants

A series of novel stereoregular one‐handed helical poly(phenylacetylene) derivatives ( PPA‐1 and PPA‐1a～g ) bearing l ‐phenylglycinol and its phenylcarbamate residues as pendants was synthesized for use as chiral stationary phases (CSPs) for HPLC, and their chiral recognition abilities were evaluated using 13 racemates. The phenylcarbamate residues include an unsubstituted phenyl, three chloro‐substituted phenyls (3‐Cl, 4‐Cl, 3,5‐Cl₂), and three methyl‐substituted phenyls (3‐CH₃, 4‐CH₃, 3,5‐(CH₃)₂). The acidity of the phenylcarbamate N‐H proton and the hydrogen bonds formed between the N‐H groups of the phenylcarbamate residues were dependent on the type, position, and the number of substituents on the phenylcarbamate residues. The chiral recognition abilities of these polymers significantly depended on the dynamic helical conformation of the main chain with more or less regularly arranged pendants. The chiral recognition abilities seem to be improved by the introduction of substituents on the phenylcarbamate residues, and PPA‐1d bearing the more acidic N‐H groups due to the 3,5‐dichloro substituents, exhibited a higher chiral recognition than the others. PPA‐1d showed an efficient chiral recognition for some racemates, and baseline separation was possible for racemates 5 , 11 , 12 , and 15 . © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 809–821     

One‐pot synthesis of polyrotaxane by clipping and cyclopolymerization of α,ω‐diethynyl isophthalamide with pyridiniumdicarboxamide chloride

The one‐pot synthesis of a main chain‐type polyrotaxane composed of axle molecules threaded through the macrocyclic units on the polymer main chain was achieved via the combination of cyclopolymerization and clipping procedures. The cyclopolymerization of an α,ω‐diethynyl monomer bearing an isophthalamide moiety ( 1 ), which clips onto an axle component bearing a pyridiniumdicarboxamide moiety ( 2·Cl ) through a chloride anion was carried out in chloroform with the monomer concentration of 0.06 mol L^?1 at 40 °C using [Rh(nbd)Cl]₂/Et₃N as a catalyst to afford a gel‐free polymer. The resulting polymer was assigned to the main chain‐type polyrotaxane with a poly(phenylacetylene) backbone (poly‐ 3·Cl ) based on size exclusion chromatography and ¹H NMR measurements. The diffusion‐order two‐dimensional NMR and circular dichroism spectra provided definitive proof of the rotaxaned architecture in the polymer. The mole fraction of the rotaxane unit in the total cyclic repeating unit was determined to be 26.3%. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Metal-binding ability of human prion protein fragment peptides analyzed by column switch HPLC

The structural conversion of the prion protein (PrP) from the normal cellular isoform (PrP(C)) to the posttranslationally modified form (PrP(Sc)) is thought to relate to Cu2? binding to histidine (H) residues. Traditionally, the binding of metals to PrP has been investigated by monitoring the conformational conversion using circular dichroism (CD). In this study, the metal-binding ability of 21 synthetic peptides representing regions of human PrP(C) was investigated by column switch high-performance liquid chromatography (CS-HPLC). The CS-HPLC system is composed of a metal chelate affinity column and an octadecylsilica (ODS) reversed-phase column that together enable the identification of metal-binding regardless of conformational conversion. Synthetic peptides were designed with respect to the position of H residues as well as the secondary structure of human PrP (hPrP). The ability of the octapeptide (PHGGGWGQ)-repeating region (OP-repeat) to bind metals was analyzed by CS-HPLC and supported by CD analysis, and indicated that CS-HPLC is a reliable and useful method for measuring peptide metal-binding. Peptides from the middle region of hPrP showed a high affinity for Cu2?, but binding to Zn2?, Ni2?, and Co2? was dependent on peptide length. C-Terminal peptides had a lower affinity for Cu2?, Zn2?, Ni2?, and Co2? than OP-repeat region peptides. Interestingly, hPrP193-230, which contained no H residues, also bound to Cu2?, Zn2?, Ni2?, and Co2?, indicating that this region is a novel metal-binding site in the C-terminal region of PrP(C). The CS-HPLC method described in this study is useful and convenient for assessing metal-binding affinity and characterizing metal-binding peptides or proteins.     

Control of Microphase Separation of Polystyrene-Silica Nanocomposites by Using Perhydropolysilazane and Partially Epoxidized Poly(styrene-block-butadiene-block-styrene)

In order to control microphase separation of polystyrene-silica nanocomposites, perhydropolysilazane (PHPS), which is a preceramic of silica, and epoxidized poly(styrene-block-butadiene-block-styrene) triblock copolymer [E-SBS, M_w = 8.0 × 10⁴, styrene: 40 mol%, degree of epoxidization of butadiene: 20 mol%] or poly(styrene-block-butadiene-block-styrene) triblock copolymer [SBS, M_w = 1.40 × 10⁵, styrene: 30 mol%] as templates of microphase separation were blended, following the calcination of composites in steam at 60°C. Well-arranged microphase separation was formed with E-SBS, though the macrophase separation was formed with SBS. The morphology of the microphase separation of the composites with E-SBS and PHPS was widely controlled by varying the PHPS content based on Molau's law. Silica domains were formed in polybutadiene domains. NMR analysis indicated the interaction between silanyl group of PHPS and epoxy group in E-SBS. The composites on the substrate were highly transparent and the surface of the composite with 73.5 vol% of silica was harder than 4H.