Characterization of boron carbon nitride film modified by excimer laser annealing

Boron carbon nitride (BCN) shows promise as a field emitter material because of its mechanical hardness, chemical inertness, and low electron affinity. This study investigated the modification of a BCN film with an amorphous area using KrF excimer laser (wavelength: 248 nm, photon energy: 5.0 eV) annealing without substrate heating. This achieved significant variation in characteristics, such as an increase in bandgap energy and decrease in electron affinity. Laser annealing reduced electron affinity from 0.7 to 0.3 eV. The results indicate that the modification of the BCN film by KrF excimer laser annealing achieves characteristics similar to hexagonal BN (h-BN) film without losing the desirable properties of the BCN film, such as physical stability.     

Fabrication of GaAs hole array as a 2D-photonic crystal and their application to photonic bandgap waveguide

A two dimensional (2D) GaAs hole array with a high aspect ratio was successfully fabricated by dry etching techniques using a highly ordered alumina membrane as a mask. The reflection spectra of the GaAs hole array shows characteristics of the photonic bandgap (PBG) calculated by using the 2D triangular lattice structure. Various defect lines were formed etching in the GaAs hole array using focused ion beam. The defect-type PBG waveguide was experimentally demonstrated.     

Enantio- and diastereoselective total synthesis of EI-1941-1, -2, and -3, inhibitors of interleukin-1beta converting enzyme, and biological properties of their derivatives

[reaction: see text] The first asymmetric total synthesis of EI-1941-1, -2, and -3, inhibitors of the interleukin-1beta converting enzyme (ICE), has been accomplished, starting from a chiral epoxy iodoquinone 11, a key intermediate in our total synthesis of epoxyquinols A and B. Despite a failure to synthesize the inhibitors by our postulated biosynthetic route, we were able to diastereoselectively synthesize them via an intramolecular carboxypalladation with the key steps being a 6-endo cyclization mode followed by beta-hydride elimination. The investigation of the biological properties of EI-1941-1, -2, and -3 and their derivatives disclosed them to be potent and effective ICE inhibitors with less cytotoxicity than EI-1941-1 and -2 in a cultured cell system.     

Fabricating and aligning pi-conjugated polymer-functionalized DNA nanowires: atomic force microscopic and scanning near-field optical microscopic studies

We report a simple method to functionalize DNA with pi-conjugated polymer, forming highly aligned and integrated arrays of pi-conjugated polymer nanowires of a few nanometers diameter. pi-conjugated polymer, polyphenazasiline, having alkylammonium salts on the N atom (PPhenaz-TMA), synthesized in this study can be directly attached to DNA, which can be organized along stretched and aligned DNA molecules on surfaces as a template. Furthermore, PPhenaz-TMA/DNA nanowires were stretched and aligned on surfaces, even when PPhenaz-TMA/DNA complexes formed in solutions. The resulting PPhenaz-TMA/DNA nanowires could be easily converted to oxidized states or metallic nanowires by using adequate oxidant or metal salts. The direct visualization of PPhenaz-TMA/DNA nanowires and its structural changes have been studied by atomic force microscopy and scanning near-field optical microscopy.     

Changes in the shape and mobility of colloidal gold nanorods with electrospray and differential mobility analyzer methods

The potential of the electrospray technique in analyzing the structure of nonspherical colloidal particles that are below 100 nm in volume-equivalent diameter was demonstrated by online size measurement using a differential mobility analyzer (DMA) with a condensation nucleus counter (CNC) system. The measured mobility of gold nanorods was confirmed by electron microscope images and the theoretical calculation of particle mobility using the dynamic shape factor and slip correction factor. To evaluate the mobility, rod particles were modeled as both a cylinder and a prolate spheroid. This study also showed that the organic surfactant coated on rod particles might be removed and that the rod particles became spherical upon the elevation of the ambient temperature during the gas-phase dispersion of colloidal nanoparticles. Moreover, the thickness of the surfactants coated on rod particles was estimated by comparing the theoretically and experimentally obtained mobilities.     

Liquid crystalline gel beads of curdlan

Curdlan beads consisting of liquid crystalline gel (LCG) and amorphous gel (AG) in alternating layers in a wide range of diameters were newly prepared by interfacial insolubilization reactions using calcium chloride as the setting reagent. The thickness of the liquid crystalline layer was proportional to the diameter of the gel bead, and the proportional constant agreed with that determined for the cylindrical gel prepared by a dialysis method. The proportional constant initially increased with increasing calcium concentration of the dispersing medium and saturated at a high concentration limit. These results suggest that the mechanisms for forming the alternating LCG/AG structures prepared with different boundary conditions are the same. The LCG/AG structure could be controlled by calcium concentration.     

Design and synthesis of artificial phospholipid for selective cleavage of integral membrane protein

An artificial phospholipid, possessing saturated alkyl chains as a membrane anchor and protein recognition site as well as an Fe(III)-EDTA moiety as a protein cleavable polar head group, was designed and synthesized based on the amidite method for the purpose of examination of cleavage of integral membrane proteins.     

Paradoxical parasellar high signals resembling shunt diseases on routine 3D time-of-flight MR angiography of the brain: mechanism for the signals and differential diagnosis from shunt diseases

BACKGROUND AND PURPOSE: We occasionally encounter phenomena in which venous flow signals of the cavernous sinus (CS) and/or inferior petrosal sinus (IPS) are visualized paradoxically in patients without arteriovenous shunt in 3D time-of-flight magnetic resonance angiography (3D-TOF MRA) of the brain. The aims of this study are to examine the frequency and cause of this phenomenon ("pseudo-shunt" image) and to determine points of differentiation from definite arteriovenous shunt images ("real shunt"). METHODS: We retrospectively examined 85 maximum intensity projection images obtained by MRA in the absence of arteriovenous shunts to detect pseudo-shunt images, and evaluated source images of pseudo-shunt studies for venous structures. Four real-shunt MRA studies were compared with pseudo-shunt studies on three points: (1) extension of sinuses, (2) extension of cortical veins, and (3) signal intensity of sinuses as assessed by the scoring method (1 point when these findings exist, 0 when they do not). RESULTS: We detected five CS (3%) and six IPS (4%) signals in 9 (11%) of the 85 cases. In the source images of four pseudo-shunt images in the CS, we detected signals from the sphenoparietal sinus (SPS). The average score was significantly lower in the pseudo-shunt (0.22) than the real-shunt (2.75) images (P < .0001). CONCLUSION: In cerebral 3D-TOF MRA, pseudo-shunt images were seen in 11% (9/85) of the study population, with antegrade upward blood flow of the SPS considered as one of the causes. Real-shunt signals can be distinguished from pseudo-shunt signals by evaluation of source images.     

Charge-ordered state in single-crystalline CaFeO3 thin film studied by x-ray anomalous diffraction

X-ray anomalous diffraction, together with a band-structure calculation, was employed to obtain a quantitative understanding of the charge-ordering state in a single-crystalline CaFeO3 thin film. The experimental result shows a characteristic energy dispersion of the nearly inhibited reflection at 150 K, implying Fe atoms split into two distinct states. The energy dispersion is in good agreement with the calculated spectrum based on the LDA+U scheme. The calculation also reveals an electronic structure of the system where holes in the oxygen orbital surround one of the distinct Fe atoms, in spite of the total electron number in both Fe atoms remaining unchanged.