Anisotropic polymerization of a long-chain diacetylene derivative Langmuir-Blodgett film on a step-bunched SiO2/Si surface

Alternating facet/terrace nanostructures were fabricated on a SiO2 surface by step-bunching and thermal oxidation of a vicinal Si(111) substrate, and their influence upon the polymerization direction of a long-chain diacetylene derivative monolayer film was investigated by angle-dependent polarized near-edge X-ray absorption fine structure (NEXAFS) spectroscopy. It was found that the peak intensity of the C 1s-pi transition was stronger when the electric vector plane of the incident X-ray was parallel to the direction of the periodic facet/terrace structures rather than perpendicular to them. On the contrary, a polymer film fabricated on a flat SiO2 surface showed no in-plane anisotropy of the peak intensity. These results indicate that the diacetylene groups in the diacetylene derivative monolayer are preferentially photopolymerized in the direction not across but along the periodic one-dimensional structures on the step-bunched and thermally oxidized SiO2/Si(111) surface.     

Rhodium-catalyzed isomerization of unactivated alkynes to 1,3-dienes

A rhodium/binap complex has been found to effectively catalyze the isomerization of unactivated internal alkynes to the corresponding 1,3-dienes in the presence of an azomethine imine as the reaction promoter.     

Prediction of measurement uncertainty in isotope dilution gas chromatography/mass spectrometry

An equation is theoretically derived which describes the relative standard deviation (RSD) of the amount ratios of analyte to its isotope-labeled variant in gas chromatography/mass spectrometry (GC/MS) using the stable isotope dilution method. The determination of methyltestosterone is taken as an example. The uncertainty equation proposed is justified by comparing the theoretical RSD values with the experimental RSD values obtained by replication over a wide range of analyte amount. The detection limit and quantitation limit are estimated from the continuous plot (precision profile) of the theoretical RSD against analyte amount.     

Supramolecular assemblies and redox modulation of pyromellitic diimide-based cyclophane via noncovalent interactions with naphthol

This paper reports the electroscopic and electrochemical properties of [2 + 2] pyromellitic diimide-based cyclophane 1 as well as acyclic N,N'-bis(2-methoxybenzyl)pyromellitic diimide 2 and the clathrate compounds formed by 1. Compound 1 was synthesized by direct cyclocondensation. Its structure was determined by an X-ray crystallographic analysis of a single crystal obtained by recrystallization from DMF. The intramolecular charge-transfer interactions of 1 and 2 were characterized by UV/vis spectroscopy and MO calculations. The UV/vis spectra showed that the tail of a longer wavelength absorption of both 1 and 2 reached the visible region. MO calculations (B3LYP/6-31G*) showed that the HOMO and LUMO orbitals of 1 and 2 substantially localize in the xylyl and pyromellitic diimide moieties across the methylene linker, respectively. The X-ray crystallographic analyses demonstrated that single crystals grown from a mixture of 1 and alpha-naphthol and a mixture of 1 and beta-naphthol were the clathrate compounds with 1D and 2D supramolecular assemblies, respectively, which are formed by a combination of hydrogen-bonding and charge-transfer interactions. From the cyclic voltammetry measurements, both 1 and 2 showed reversible reduction processes, and the reduction potential observed at -1.09 V vs Ag/Ag+ for 2 split into two potentials at -1.01 and -1.14 V for 1. The addition of alpha- and beta-naphthol induced a decrease in the potentials due to the diradical anion of 1 and radical anion of 2 by about 80 mV, and their reduction processes were reversible.     

New chiral Schiff base as a tridentate ligand for catalytic enantioselective addition of diethylzinc to aldehydes

We have developed new chiral Schiff base catalysts for the enantioselective addition of diethylzinc reagents to aldehydes. The reaction of benzaldehyde with diethylzinc in the presence of 1 mol % of the chiral Schiff base catalyst proceeded to afford 1-phenyl-1-propanol in 96% enantiomeric excess (ee).     

Regio- and stereoselective synthesis of alkenylphosphines: a rhodium-catalyzed hydrophosphination of alkynes using a silylphosphine

A novel rhodium-catalyzed hydrophosphination of alkynes using a silylphosphine as a phosphino group source is described. A variety of alkynes, both terminal and internal ones with aryl, alkyl, and carboxyl groups, gave the corresponding alkenylphosphines in a highly regioselective and syn-selective manner. Alkenes with an electron-withdrawing group also gave the corresponding adducts in good yields.     

In situ x-ray diffraction measurements of the capillary fountain jet produced via ultrasonic atomization

In situ x-ray diffraction measurements were carried out for investigating the liquid structure in the ultrasonic fountain jet to consider the mechanism of the "ultrasonic ethanol separation" reported by Sato et al. [J. Chem. Phys. 114, 2382 (2001)]. For pure liquids (water and ethanol), it was found that the high frequency ultrasound does not affect the liquid structure microscopically. For the 20 mol % ethanol-water mixture, the estimated ethanol mole fraction in the ultrasonic fountain jet by using the position of the main maximum in the x-ray diffraction profile coincided with that in the reservoir. This result suggests that the ethanol separation is not caused by any distorted liquid structure under the ultrasound irradiation and occurs when or after the generation of the liquid droplet mist.     

Efficient synthesis of isothiocyanates based on the tandem Staudinger/aza-Wittig reactions and mechanistic consideration of the tandem reactions

The tandem and stepwise Staudinger/aza-Wittig reactions of several azides were examined in detail. The tandem reaction method (Method I) exhibited superior results in the yield of the corresponding isothiocyanates bearing an electron-withdrawing group than the conventional stepwise method (Method II) which involves the sequential treatment of the azides with triphenylphosphine and then carbondisulfide. The mechanistic consideration for both reaction methods was proposed on the basis of the 1H-NMR analyses.     

Syntheses, structural determinations of [Ru(ROCS2)2(PPh3)2](+/0) pairs, and kinetic analyses of thermal reactions involving transient trans-[Ru(iPrOCS2)2(PPh3)2] species (ROCS2(-) = ethyl- or isopropyldithiocarbonate and PPh3 = triphenylphosphine)

Controlled-potential electrochemical oxidation of cis-[Ru(ROCS2)2(PPh3)2] (R = Et, iPr) yielded corresponding Ru(III) complexes, and the crystal structures of cis-[Ru(ROCS2)2(PPh3)2] and trans-[Ru(ROCS2)2(PPh3)2](PF6) were determined. Both pairs of complexes exhibited almost identical coordination structures. The Ru-P distances in trans-[Ru(III)(ROCS2)2(PPh3)2](PF6) [2.436(3)-2.443(3) A] were significantly longer than those in cis-[Ru(II)(ROCS2)2(PPh3)2] [2.306(1)-2.315(2) A]: the smaller ionic radius of Ru(III) than that of Ru(II) stabilizes the trans conformation for the Ru(III) complex due to the steric requirement of bulky phosphine ligands while mutual trans influence by the phosphine ligands induces significant elongation of the Ru(III)-P bonds. Cyclic voltammograms of the cis-[Ru(ROCS2)2(PPh3)2] and trans-[Ru(ROCS2)2(PPh3)2]+ complexes in dichloromethane solution exhibited typical dual redox signals corresponding to the cis-[Ru(ROCS2)2(PPh3)2](+/0) (ca. +0.15 and +0.10 V vs ferrocenium/ferrocene couple for R = Et and iPr, respectively) and to trans-[Ru(ROCS2)2(PPh3)2](+/0) (-0.05 and -0.15 V vs ferrocenium/ferrocene for R = Et and iPr, respectively) couples. Analyses on the basis of the Nicholson and Shain's method revealed that the thermal disappearance rate of transient trans-[Ru(ROCS2)2(PPh3)2] was dependent on the concentration of PPh3 in the bulk: the rate constant for the intramolecular isomerization reaction of trans-[Ru(iPrOCS2)2(PPh3)2] was determined as 0.338 +/- 0.004 s(-1) at 298.3 K (deltaH* = 41.8 +/- 1.5 kJ mol(-1) and deltaS* = -114 +/- 7 J mol(-1) K(-1)), while the dissociation rate constant of coordinated PPh3 from the trans-[Ru(iPrOCS2)2(PPh3)2] species was estimated as 0.113 +/- 0.008 s(-1) at 298.3 K (deltaH* = 97.6 +/- 0.8 kJ mol(-1) and deltaS* = 64 +/- 3 J mol(-1) K(-1)), by monitoring the EC reaction (electrode reaction followed by chemical processes) at different concentrations of PPh3 in the bulk. It was found that the trans to cis isomerization reaction takes place via the partial dissociation of iPrOCS2(-) from Ru(II), contrary to the previous claim that it takes place by the twist mechanism.     

Crystal structure and peroxidase activity of myoglobin reconstituted with iron porphycene

The incorporation of an artificially created metal complex into an apomyoglobin is one of the attractive methods in a series of hemoprotein modifications. Single crystals of sperm whale myoglobin reconstituted with 13,16-dicarboxyethyl-2,7-diethyl-3,6,12,17-tetramethylporphycenatoiron(III) were obtained in the imidazole buffer, and the 3D structure with a 2.25-A resolution indicates that the iron porphycene, a structural isomer of hemin, is located in the normal position of the heme pocket. Furthermore, it was found that the reconstituted myoglobin catalyzed the H2O2-dependent oxidations of substrates such as guaiacol, thioanisole, and styrene. At pH 7.0 and 20 degrees C, the initial rate of the guaiacol oxidation is 11-fold faster than that observed for the native myoglobin. Moreover, the stopped-flow analysis of the reaction of the reconstituted protein with H2O2 suggested the formation of two reaction intermediates, compounds II- and III-like species, in the absence of a substrate. It is a rare example that compound III is formed via compound II in myoglobin chemistry. The enhancement of the peroxidase activity and the formation of the stable compound III in myoglobin with iron porphycene mainly arise from the strong coordination of the Fe-His93 bond.