Neutral and Oxidized Triisopropylsilyl End‐Capped Oligothienoacenes: A Combined Electrochemical,Spectroscopic, and Theoretical Study

This work presents an analysis of the structural, electrochemical, and optical properties of a family of triisopropylsilyl end‐capped oligothienoacenes (TIPS‐ Tn ‐TIPS, n=4–8) by combining cyclic voltammetry, spectroscopic techniques, and quantum‐chemical calculations. TIPS‐ Tn ‐TIPS compounds form stable radical cations, and dications are only obtained for the longest oligomers (n=7 and 8). Oxidation leads to the quinoidization of the conjugated backbone, from which electrons are mainly extracted. The absorption and fluorescence spectra show partially resolved vibronic structures even at room temperature, due to the rigid molecular geometry. Two well‐resolved vibronic progressions are observed at low temperatures due to the vibronic coupling, with normal modes showing wavenumbers of ≈1525 and ≈480 cm^?1. Optical absorption bands display remarkable bathochromic dispersion with the oligomer length, indicative of the extent of π conjugation. The optical properties of the oxidized compounds are characterized by in situ UV/Vis/NIR spectroelectrochemistry. The radical cation species show two intense absorption bands emerging at energies lower than in the neutral compounds. The formation of the dication is only detected for the heptamer and the octamer, and shows a new band at intermediate energies. Optical data are interpreted with the help of density functional theory calculations performed at the B3LYP/6‐31G** level, both for the neutral and the oxidized compounds.     

Goeritz invariants of pretzel links

The Goeritz matrix of a connected link diagram is diagonalized to a normal form by the elementary divisor theory. The integer sequence given by the diagonal entries of this form is a link invariant called the Georitz invariant. In this paper, we study the Goeritz invariants of pretzel links.     

Experimental investigation of flame spreading over pure methane hydrate in a laminar boundary layer

Flame spreading over pure methane hydrate in a laminar boundary layer is investigated experimentally. The free stream velocity (U_∞) was set constant at 0.4 m/s and the surface temperature of the hydrate at the ignition (T_s) was varied between ?10 and ?80 °C. Hydrate particle sizes were smaller than 0.5 mm. Two types of flame spreading were observed; “low speed flame spreading” and “high speed flame spreading”. The low speed flame spreading was observed at low temperature conditions (T_s = ?80 to ?60 °C) and temperatures in which anomalous self-preservation took place (T_s = ?30 to ?10 °C). In this case, the heat transfer from the leading flame edge to the hydrate surface plays a key role for flame spreading. The high speed flame spreading was observed when T_s = ?50 and ?40 °C. At these temperatures, the dissociation of hydrate took place and the methane gas was released from the hydrate to form a thin mixed layer of methane and air with a high concentration gradient over the hydrate. The leading flame edge spread in this premixed gas at a spread speed much higher than laminar burning velocity, mainly due to the effect of burnt gas expansion.     

Production Spectra of the ΣNN Quasibound States in 3He(K −, π ∓) Reactions

We theoretically demonstrate the inclusive and semiexclusive spectra in the ³He (K ^?, π ^?) reactions at 600 MeV/c (4°) within a distorted-wave impulse approximation, using a coupled (2N ? Λ) + (2N ? Σ) model with a spreading potential. It is shown that a signal of a ${^3_\Sigma{\rm He}}$ quasibound state is clearly observed near the Σ threshold in the π ^? spectrum, whereas a peak of a ${^3_\Sigma{\rm n}}$ quasibound state is relatively reduced in the π ⁺ spectrum. The mechanism of Σ production for these spectra is discussed.     

Micropatterning of copper on a poly(ethylene terephthalate) substrate modified with a self-assembled monolayer

We have developed a technique for the site-selective electroless deposition of Cu on poly(ethylene terephthalate) (PET) substrate modified with an organic self-assembled monolayer (SAM). The PET substrate was first modified with a silica-like layer by being dip-coated in an acetone solution of 3-aminopropyltrimethoxysilane and treated with UV light. The PET substrate was further modified with thiol groups using a 3-mercaptopropyltrimethoxysilane-SAM and then irradiated by UV light through a photomask to prepare thiol-group regions and OH-group regions. Cu was then deposited on only the thiol-group regions of the substrate by electroless deposition in a neutral solution with no catalysts by using dimethylamineborane as a reducing reagent. This site-selective deposition process can control the deposition conditions by an organic thin film fabricated on a surface-modified PET substrate, and thus can be applied to other low heat-resistant substrates.     

Immobilizing single lipid and channel molecules in artificial lipid bilayers with annexin A5

The effects of annexin A5 on the lateral diffusion of single-molecule lipids and single-molecule proteins were studied in an artificial lipid bilayer membrane. Annexin A5 is a member of the annexin superfamily, which binds preferentially to anionic phospholipids in a Ca2+-dependent manner. In this report, we were able to directly monitor single BODIPY 1,2-dihexadecanoyl-sn-glycero-3-phosphoethanolamine (DHPE) and ryanodine receptor type 2 (RyR2) labeled with Cy5 molecules in lipid bilayers containing phosphatidylserine (PS) by using fluorescence microscopy. The diffusion coefficients were calculated at various annexin A5 concentrations. The diffusion coefficients of BODIPY-DHPE and Cy5-RyR2 in the absence of annexin A5 were 4.81 x 10(-8) cm(2)/s and 2.13 x 10(-8) cm(2)/s, respectively. In the presence of 1 microM annexin A5, the diffusion coefficients of BODIPY-DHPE and Cy5-RyR2 were 2.2 x 10(-10) cm(2)/s and 9.5 x 10(-11) cm(2)/s, respectively. Overall, 1 microM of annexin A5 was sufficient to induce a 200-fold decrease in the lateral diffusion coefficient. Additionally, we performed electrophysiological examinations and determined that annexin A5 has little effect on the function of RyR2. This means that annexin A5 can be used to immobilize RyR2 in a lipid bilayer when imaging and analyzing RyR2.     

Influence of dissolved-air concentration on spatial distribution of bubbles for sonochemistry

The pulsation of ultrasonic cavitation bubbles at various dissolved-air concentration in a sonochemical reaction field of standing-wave type is investigated experimentally by laser-light scattering. When a thin light sheet, finer than half the wavelength of sound, is introduced into the cavitation bubbles at an antinode of sound pressure, the scattered light intensity oscillates. The peak-to-trough light intensity is correlated with the number of bubbles that contribute to the sonochemical reaction. It is shown that as the dissolved air concentration becomes higher, the weighted center of the spatial distribution of the peak-to-trough intensity tends to shift towards the liquid surface. At higher concentration of the dissolved air, a great deal of bubbles with size distribution generated due to coalescence between bubbles disturbs sound propagation to change the sound phase easily. A standing wave to trap tiny oscillating bubbles is established only at the side which is nearer to the liquid surface. Also at higher concentration, liquid flow induced by drag motion of bubbles by the action of radiation force becomes apparent and position-unstable region of bubble is enlarged from the side of sound source towards the liquid surface. Therefore, the position of oscillating bubbles active for sonochemical reaction is limited at the side which is nearer to the liquid surface at higher concentration of the dissolved air.     

Effect of tetrasodium tripolyphosphate on the freeze-concentrated glass-like transition temperature of sugar aqueous solutions

The freeze-concentrated glass-like transition temperatures (Tg2), so-called ante-melting temperature or ice-melting temperature of tripolyphosphate-sugar aqueous solutions prepared with various sugars (ribose, sorbitol, glucose, maltose, sucrose, and trehalose) were investigated by using differential scanning calorimetry to evaluate the effect of tetrasodium tripolyphosphate on the Tg2 of sugar aqueous solutions. The Tg2 of tripolyphosphate-sugar aqueous solutions were higher than those of tripolyphosphate or sugar aqueous solutions and converged in a narrow temperature range of 238 to 243 K. Furthermore, a study of the Tg2 of tripolyphosphate-glucose aqueous solutions adjusted to various ratios indicated that the Tg2 increment depended on the ratio and that another glass-like transition appeared at a temperature below the Tg2 by increasing the ratio of tripolyphosphate. The drastic increase in the Tg2 of sugars with the addition of tripolyphosphate will be useful for improving the cryostabilization of biomaterials.     

Enhancement of sonochemical reaction rate by addition of micrometer-sized air bubbles

The sonochemical reaction rate has been enhanced by the introduction of tiny air bubbles. The bubbles including micrometer-sized ones are produced by method of atomization and are introduced into aqueous luminol solution under 141-kHz sonication in order to investigate the enhancement of sonochemical reaction rate by introduction of tiny bubbles through the intensity measurement of sonochemiluminescence (SCL). It is shown that the introduction of tiny bubbles under sonication accomplishes the large SCL intensity compared to the cases of sonication only and liquid flow under sonication. It is also shown that it is important to adjust the configuration of tiny-bubble addition to the sound field. Through the investigations on the intensity and the spatial pattern of luminol-SCL, it has been clarified that tiny bubbles added into the sonicated liquid not only cause the liquid flow but also increase the number of collapsing bubbles active for sonochemical reaction. It is also shown that the tiny-bubble addition enhances the reaction rate of KI oxidation under sonication. Therefore, the present method of introduction of tiny bubbles is effective for enhancement of sonochemical reaction rate.     

A new approach to the determination of atomic-architecture of amorphous zeolite precursors by high-energy X-ray diffraction technique

The structure of amorphous precursor species formed under hydrothermal conditions, prior to the onset of crystallization of microporous aluminosilicate zeolites, is determined employing high-energy X-ray diffraction (HEXRD). The investigation, combined with the use of reverse Monte Carlo modelling suggests that even numbered rings, especially 4R (R: ring) and 6R, which are the dominant aluminosilicate rings in zeolite A, have already been produced in the precursor. The model implies that the formation of double 4Rs occurs at the final step of the crystallization of zeolite A.