Vinyl polymerization. 275. Polymerization of vinyl monomers photosensitized by tetramethyltetrazene

A study of the photopolymerization of vinyl monomers in the presence of tetramethyltetrazene (TMT) was made. TMT was found to act as an effective sensitizer. In the photopolymerization of vinyl monomers such as methyl methacrylate or styrene the rate of polymerization was expressed by the equation: R_p = k[TMT]^1/2[monomer]. The chain-transfer constant of TMT under ultraviolet irradiation was estimated to be 3.8 × 10^?2 for the above monomers. A linear correlation was found to exist between the reactivity of dimethylamino radical toward the vinyl monomers and e values for the corresponding monomers.     

Photochromism of viologens included in crown ether cavity

The effect of a pi-electron-donating macrocyclic molecule on the photochromic behavior of viologen derivatives was investigated in a thin polymer film. The intermolecular interactions between the viologens and the macrocyclic molecule were investigated in a solution before photoirradiation. In acetone, benzylviologens, N,N'-dibenzyl-4,4'-bipyridinium hexafluorophosphate (1) and N,N'-dibenzyl-trans-1,2-bis(4-pyridinium)ethylene hexafluorophosphate (2) each derived from 4,4'-bipiyridine and trans-1,2-bis(4-pyridyl)ethylene, respectively, form an inclusion complex with p-benzocrown ether (3) with binding constants of ca 200 M-1, which was driven by a charge transfer interaction. The peak wavelength of the charge transfer absorption band was at 453 and 421 nm for the inclusion complexes of 1 and 2 with 3, respectively. Upon photoirradiation to the polymer film containing 1, the film changed color from colorless to blue, associated with the reduction of 1 from the dication to the radical cation. The original dication was recovered after 120 min. The addition of 3 into the film containing 1 caused not only the color change from colorless to yellow, associated with the charge transfer interaction between 1 and 3 before photoirradiation, but also an acceleration in the bleaching rate of the photoreduced 1. When p-dimethoxybenzene (4) was used as an acyclic analog of 3, a negligible change in the photochromic behavior of 1 was observed. Similar effect of 3 on the photochromic behavior of 2 was observed. These results imply that the pi-electron-donating macrocyclic molecule causes a faster bleaching of photoreduced viologens by forming the inclusion complex.     

DNA Origami Scaffolds as Templates for Functional Tetrameric Kir3 K+ Channels

In native systems, scaffolding proteins play important roles in assembling proteins into complexes to transduce signals. This concept is yet to be applied to the assembly of functional transmembrane protein complexes in artificial systems. To address this issue, DNA origami has the potential to serve as scaffolds that arrange proteins at specific positions in complexes. Herein, we report that Kir3 K⁺ channel proteins are assembled through zinc‐finger protein (ZFP)‐adaptors at specific locations on DNA origami scaffolds. Specific binding of the ZFP‐fused Kir3 channels and ZFP‐based adaptors on DNA origami were confirmed by atomic force microscopy and gel electrophoresis. Furthermore, the DNA origami with ZFP binding sites nearly tripled the K⁺ channel current activity elicited by heterotetrameric Kir3 channels in HEK293T cells. Thus, our method provides a useful template to control the oligomerization states of membrane protein complexes in vitro and in living cells.     

Carbon Monoxide Oxidation by Polyoxometalate‐Supported Gold Nanoparticulate Catalysts: Activity,Stability, and Temperature‐ Dependent Activation Properties

Nanoparticulate gold supported on a Keggin‐type polyoxometalate (POM), Cs₄[α‐SiW₁₂O₄₀]?n H₂O, was prepared by the sol immobilization method. The size of the gold nanoparticles (NPs) was approximately 2 nm, which was almost the same as the size of the gold colloid precursor. Deposition of gold NPs smaller than 2 nm onto POM (Au/POM) was essential for a high catalytic activity for CO oxidation. The temperature for 50 % CO conversion was ?67 °C. The catalyst showed extremely high stability for at least one month at 0 °C with full conversion. The catalytic activity and the reaction mechanism drastically changed at temperatures higher than 40 °C, showing a unique behavior called a U‐shaped curve. It was revealed by IR measurement that Au^δ+ was a CO adsorption site and that adsorbed water promoted CO oxidation for the Au/POM catalyst. This is the first report on CO oxidation utilizing Au/POMs catalysts, and there is a potential for expansion to various gas‐phase reactions.     

Synthesis of TiRru2 heterobimetallic and TiRuM (M = Rh, Rr, Pd, Pt) heterotrimetallic sulfido clusters from a hydrosulfido-bridged titanium-ruthenium complex

Treatment of the hydrosulfido-bridged titanium-ruthenium heterobimetallic complex [Cp2Ti(mu2-SH)2RuCl(eta5-C5Me5)] (1; Cp = eta5-C5H5) with an excess of triethylamine followed by addition of [RuCl2(PPh3)3] and [[(cod)M]2(mu2-Cl)2] (M = Rh, Ir; cod = 1,5-cyclooctadiene) led to the formation of the TiRu2 and TiRuM mixed-metal sulfido clusters [(CpTi)[(eta5-C5Me5)Ru][Ru(PPh3)2](mu3-S)2(mu2-Cl)2] (3) and [(CpTi)[(eta5-C5Me5)Ru][M(cod)](mu3-S)2(mu2-Cl)] (M = Rh (4a), Ir (4b)), respectively. On the other hand, the reactions of 1 with [M(PPh3)4] (M = Pd, Pt) afforded the TiRuM trinuclear clusters [(CpTiCl)[(eta5-C5Me5)Ru][M(PPh3)2](mu3-S)(mu2-S)(mu2-H)] (M = Pd (5a), Pt (5b)) with an unprecedented M3(mu3-S)(mu2-S) core. The detailed structures of these triangular clusters 3-5 have been determined by X-ray crystallography. Crystal data: 3, triclinic, P1, a = 12.448(4) A, b = 12.773(4) A, c = 17.270(4) A, alpha = 100.16(2) degrees, beta = 99.93(2) degrees, gamma = 114.11(3) degrees, V = 2373(1) A(3), Z = 2; 4a, triclinic, P1, a = 7.714(2) A, b = 11.598(3) A, c = 14.802(4) A, alpha = 80.46(2) degrees, beta = 82.53(2) degrees, gamma = 71.47(2) degrees, V = 1234.0(6) A3, Z = 2; 4b, triclinic, P1, a = 7.729(1) A, b = 11.577(2) A, c = 14.766(3) A, alpha = 80.14(1) degrees, beta = 82.71(1) degrees, gamma = 71.55(1) degrees, V = 1231.1(4) A3, Z = 2; 5a, monoclinic, P2(1)/c, a = 11.259(4) A, b = 16.438(4) A, c = 26.092(5) A, beta = 102.23(3) degrees, V = 4719(2) A(3), Z = 4; 5b, monoclinic, P2(1)/n, a = 11.369(2) A, b = 16.207(3) A, c = 26.116(2) A, beta = 102.29(1) degrees, V = 4701(1) A3, Z = 4.     

Effects of added metal ions on the interaction between polyvinylpyrrolidone and azo dyes carrying hydroxyl groups

The extent of binding of chrome violet, which is a monoazo dye and involves two hydroxyl groups in o and o′ positions to azo group, by polyvinylpyrrolidone is markedly enhanced in the presence of Co²⁺ ion. The amount of binding in the presence of 1 × 10^?4 mol/L of Co²⁺ ion increases by a factor of about 10 compared to that in the absence of the metal ion. Ni²⁺ and Zn²⁺ ions do not perceptively influence the binding affinity of the dye. Cu²⁺ ion, in contrast, suppresses the binding. To investigate further the action of added metal ions, a cobalt–complex dye was prepared and its binding property for the polymer was compared to that of chrome violet in the presence of metal ions. Some possible mechanisms for the enhancement of chrome violet binding by the addition of Co²⁺ ion are described.     

Binding of methyl orange and its homologs by powdered nylon 612: Peculiar temperature dependence on the binding

The ability of powdered Nylon 612 to bind methyl orange, ethyl orange, propyl orange, and butyl orange was investigated at 5, 15, 25 and 35°C in an aqueous solution. The amount of binding of the dye is much higher with this polyamide than with powdered Nylon 66 reported previously,¹ although the former polymer has fewer amide end groups. The Van't Hoff plots of the first binding constant for the binding of butyl orange and propyl orange by powdered Nylon 612 exhibit a bell-shaped curve, whereas the plots for methyl orange and ethyl orange do not. Maximal binding occurs at approximately 15°C for propyl orange and at about 25°C for butyl orange. This is the first instance where the peculiar temperature dependence of the binding constant has been found in the binding of propyl orange, whose hydrophobicity is less than that of butyl orange. These tendencies can be accounted for in terms of increased hydrophobic of butyl orange. These tendencies can be accounted for in terms of increased hydrophobic domains in powdered Nylon 612 and enhanced hydrophobic contributions in the binding process.     

The Electronic State of Hydrogen in the α Phase of the Hydrogen‐Storage Material PdH(D)x: Does a Chemical Bond Between Palladium and Hydrogen Exist?

The palladium–hydrogen system is one of the most famous hydrogen‐storage systems. Although there has been much research on β‐phase PdH(D)_x, we comprehensively investigated the nature of the interaction between Pd and H(D) in α‐phase PdH(D)_x (x<0.03 at 303 K), and revealed the existence of Pd?H(D) chemical bond for the first time, by various in situ experimental techniques and first‐principles theoretical calculations. The lattice expansion, magnetic susceptibility, and electrical resistivity all provide evidence. In situ solid‐state ¹H and ²H NMR spectroscopy and first‐principles theoretical calculations revealed that a Pd?H(D) chemical bond exists in the α phase, but the bonding character of the Pd?H(D) bond in the α phase is quite different from that in the β phase; the nature of the Pd?H(D) bond in the α phase is a localized covalent bond whereas that in the β phase is a metallic bond.     

N-linked oligosaccharide analysis of rat brain Thy-1 by liquid chromatography with graphitized carbon column/ion trap-Fourier transform ion cyclotron resonance mass spectrometry in positive and negative ion modes

We have previously described the site-specific glycosylation analysis of rat brain Thy-1 by LC/multistage tandem mass spectrometry (MS(n)) using proteinase-digested Thy-1. In the present study, detailed structures of oligosaccharides released from Thy-1 were elucidated by mass spectrometric oligosaccharide profiling using LC/MS with a graphitized carbon column (GCC-LC/MS). First, using model oligosaccharides, we improved the oligosaccharide profiling by ion trap mass spectrometry (IT-MS) coupled with Fourier transform ion cyclotron resonance mass spectrometry (FT-ICR-MS). Sequential scanning of a full MS(1) scan with FT-ICR-MS followed by data-dependent MS(n) with IT-MS in positive ion mode, and a subsequent full MS(1) scan with FT-ICR-MS followed by data-dependent MS(n) with IT-MS in negative ion mode enabled the monosaccharide composition analysis as well as profiling and sequencing of both neutral and acidic oligosaccharides in a single analysis. The improved oligosaccharide profiling was applied to elucidation of N-linked oligosaccharides from Thy-1 isolated by sodium dodecyl sulfate-polyacrylamide gel electrophoresis. It was demonstrated that Thy-1 possesses a significant variety of N-linked oligosaccharides, including Lewis a/x, Lewis b/y, and disialylated structure as a partial structure. Our method could be applicable to analysis of a small abundance of glycoproteins, and could become a powerful tool for glycoproteomics.     

Enantioselective addition of ketene silyl acetals to nitrones catalyzed by chiral titanium complexes. Synthesis of optically active beta-amino acids

A chiral titanium complex, Ti(O-i-Pr)(4)/BINOL/tert-butylcatechol, catalyzes enantioselective addition reaction of ketene silyl acetals to nitrones to give optically active beta-amino acid derivatives which are biologically active compounds and useful synthetic intermediates of natural products and pharmaceuticals such as beta-lactam antibiotics. The combined process of catalytic oxidation of secondary amines and enantioselective carbon-carbon bond formation of nitrones thus obtained with ketene silyl acetals provides a useful two-step method for the synthesis of optically active beta-amino acid derivatives and related nitrogen compounds.