New asymmetric reactions of 2-formyl- and 2-acyl-1-[(2,4, 6-triisopropylphenyl)sulfinyl]naphthalenes via diastereomeric rotamers

Nucleophilic reactions with Grignard reagents and the Mukaiyama aldol reactions of the naphthaldehydes having the (2,4, 6-triisopropylphenyl)sulfinyl group produced products with high stereoselectivity. In these reactions, the stereochemistry of the major products changes depending on the Lewis acids used. Reduction of the 2-acyl-1-[(2,4,6-triisopropylphenyl)sulfinyl]naphthalenes also proceeds with high stereoselectivity but with a different stereochemistry depending on the reducing agents. We have demonstrated, by the mechanistic consideration based on the X-ray crystal structures as well as the (1)H and (13)C NMR spectral data, that the extremely high and specific stereoselectivities of these reactions are due to the predominant rotamer around the C(naph)-S axis. Synthesis of enantiomerically pure 2-naphthylmethanol is provided as an example.     

A novel method for asymmetric synthesis of both enantiomers of α-substituted carboxylic acid derivatives from optically active 1-chlorovinyl p-tolyl sulfoxides and lithium ester enolates with 1,4-chiral induction from the sulfur chiral center

Treatment of optically active 1-chlorovinyl p-tolyl sulfoxides, which were synthesized from symmetrical ketones and (R)-(−)-chloromethyl p-tolyl sulfoxide in three steps, with lithium enolate of carboxylic acid tert-butyl esters gave optically active adducts having a substituent at the α-position with high 1,4-chiral induction from the sulfur chiral center in high yields. The adducts were converted to optically active esters and carboxylic acids having a chiral center at the α-position. When this addition reaction was carried out with the ester enolate generated from excess carboxylic acid tert-butyl ester with LDA in the presence of HMPA, the diastereomer of the adduct was obtained. By using the two reaction conditions for the generation of the ester enolates, a new method for asymmetric synthesis of both enantiomers of carboxylic acid derivatives having a substituent at the α-position from the one chiral source, (R)-(−)-chloromethyl p-tolyl sulfoxide, was realized.     

Preparation and biological activity of 2-[4-(thiazol-2-yl)phenyl]propionic acid derivatives inhibiting cyclooxygenase.

A series of 2-[4-(thiazol-2-yl)phenyl]propionic acids substituted at various positions were prepared by the reaction of diethyl 2-methyl-2-(4-thiocarbamoylphenyl)malonates with alpha-bromoaldehyde diethyl acetals or alpha-haloketones followed by hydrolysis of esters. The inhibition of prostaglandin H synthetase (cyclooxygenase) was assayed by use of an enzyme preparation from guinea pig polymorphonuclear leukocytes. Examination of the structure-activity relationship of these compounds indicated that the substitution pattern with halogens at position 3 (R1) of the benzene ring and a methyl group in position 4 (R2) and/or 5 (R3) of the thiazole ring were favorable for inhibitory activity. The compounds bearing bulky alkyl or polar functional groups at the R2 position were weak inhibitors. The potent inhibitors of cyclooxygenase were tested for their ability to reduce carrageenin-induced inflammation of rat paws. These derivatives had strong anti-inflammatory activity based on their strong inhibition of cyclooxygenase, with some exceptions, including those with a thiomethyl group at R1.     

Diarylurea-linked zinc porphyrin dimer as a dual-mode artificial receptor: supramolecular control of complexation-facilitated photoinduced electron transfer

A novel porphyrinic receptor 1 in which two zinc porphyrins are bridged by two diarylurea linkers was developed for recognition of a viologen derivative (hexyl viologen, HV). The electronic absorption spectra as well as the 1H NMR experiments revealed that the HV molecule was bound to the cleft in 1 mainly through carbonyl dipole-charge interactions to afford a 1:1 complex. From the steady-state fluorescence spectroscopic study, the photoinduced electron transfer (PET) from 1 to HV was extremely facilitated by the receptor-substrate complexation. The receptor 1 also formed a 1:1 complex with 1,4-diazabicyclo[2.2.2]octane (DABCO) through two Zn-N coordination interactions, and, using DABCO as an inhibitor, we suppressed the PET reaction via the substrate exchange.     

Binding of methyl orange and its homologs by polyion complexes consisting of a piperidinium cationic polymer and various polyanions in aqueous solution

A study was made of the formation of polyion complexes between a piperidinium cationic polymer and polyanions and of the binding of azo-dye anions (methyl, ethyl, propyl, and butyl orange) by these complexes. Sodium poly(acrylate), poly(styrenesulfonate), dextran sulfate, and carboxy-methylcellulose were used as polyanions. The resultant polyion complexes (insoluble in aqueous solutions) were compared for their ability to bind the small organic molecules in aqueous solutions, for example, of urea and an inorganic electrolyte (KCI), and exhibited a strong binding affinity toward these small anions. Polyion complexes that consisted of sodium poly(acrylate), dextran sulfate, and carboxymethylcellulose as polyanions cooperated in the binding, whereas the polyion complex of sodium poly(styrenesulfonate) did not. It was suggested that small organic anions interact with the polyion complexes primarily through electrostatic and hydrophobic forces.     

Temperature dependence on the binding of butyl orange by bovine serum albumin

The binding of 4′-dibutylaminoazobenzene-4-sulfonate anion (butyl orange) by bovine serum albumin has been examined quantitatively by an equilibrium dialysis method at 5, 10, 15, 20, 25, and 35°C. The first binding constants and the thermodynamic parameters for the formation of the first dye anion-protein complex have been calculated. The peculiar temperature dependence of the first binding constant could be observed. That is, the value of the first binding constant increases with increasing temperature until it reaches a maximum value at approximately 18°C and then decreases with raising temperature. Accordingly, this binding process is exothermic above 18°C and is endothermic below 18°C. Near 18°C the process exhibits athermal reaction. From the thermodynamic data obtained, it is evident that the favorable free energy of the binding is accompanied by an entropy gain and that the enthalpies of the binding vary from a positive (unfavorable) value below 18°C to a negative (favorable) one above 18°C. Furthermore an apparent temperature dependence of the thermodynamic functions was observed. That is, ΔF° becomes larger in absolute magnitude as the temperature increases. The positive quantity of ΔS° tends to decrease with increasing temperature. All these facts can be interpreted satisfactorily in terms of hydrophobic interactions between hydrophobic portions of the dye and nonpolar parts of the albumin.     

Reaction of carboxamide with Cu2Oisonitrile complex; formation of a new chelated copper(I) complex

Reaction of carboxamides with Cu₂O in the presence of t-butyl isocyanide gave new chelated copper(I) complexes, which probably are formed by the insertion of t-butyl isocyanide into the coppernitrogen bond of copper(I) amide isonitrile complexes, which were initially produced from the carboxamides and Cu₂Ot-butyl isocyanide complex. The same chelated copper(I) complexes were prepared more readily by the reaction of the corresponding N-trimethylsilyl-carboxamides with Cu₂Ot-butyl isocyanide complex. Reactions of the copper(I) complexes thus obtained with alkylating agents, such as alkyl halides, alkyl tosylates and triethyloxonium tetrafluoroborate, also were described.     

Triple hydrogen bonds direct crystal engineering of metal-assembled complexes: the effect of a novel organic-inorganic module on supramolecular structure

Novel triply hydrogen bonded suprastructures based on [M(tdpd)2(L)2]2- (H2tdpd=1,4,5,6-tetrahydro-5,6-dioxo-2,3-pyrazinedicarbonitrile, L=solvent) and melamine-analogous cations have been synthesized and characterized. The use of anions containing two AAA sets from [M(tdpd)2(L)2]2- together with cations containing one DDD set (A=hydrogen-bond acceptor, D=hydrogen-bond donor) leads to the formation of complementary triply hydrogen bonded modules in the solid state. In all cases, the building module is further extended via additional hydrogen-bonding interactions to produce a tape, and tapes are assembled into sheets. These results show that a hydrogen-bonded module consisting of different kinds of building blocks, one of which is a metal complex that includes hydrogen-bond acceptor sites and the other is a hydrogen-bond donor molecule, will be attractive for constructing metal-containing supramolecular systems by the self-assembly technique.     

Enantioselective addition of ketene silyl acetals to nitrones catalyzed by chiral titanium complexes. Synthesis of optically active beta-amino acids

A chiral titanium complex, Ti(O-i-Pr)(4)/BINOL/tert-butylcatechol, catalyzes enantioselective addition reaction of ketene silyl acetals to nitrones to give optically active beta-amino acid derivatives which are biologically active compounds and useful synthetic intermediates of natural products and pharmaceuticals such as beta-lactam antibiotics. The combined process of catalytic oxidation of secondary amines and enantioselective carbon-carbon bond formation of nitrones thus obtained with ketene silyl acetals provides a useful two-step method for the synthesis of optically active beta-amino acid derivatives and related nitrogen compounds.     

Synthesis of tert-butyl-substituted poly (ether ketone) by nickel-catalyzed coupling polymerization of aromatic dichloride

tert-Butyl substituted poly (aryl ether ketone)s with relatively high molecular weights were prepared by the Ni-catalyzed polymerization of tert-butyl substituted aromatic dichlorides containing ether ketone unit. These polymers were amorphous and soluble in common organic solvents, such as THF, dichloromethane, and chloroform. De-tert-butylation of the polymer by the treatment of trifluoromethanesulfonic acid in the presence of toluene proceeded smoothly and produced crystalline poly (aryl ether ketone). © 1994 John Wiley & Sons, Inc.