Flow injection microbial trichloroethylene sensor

A flow type microbial biosensor for direct measurement of trichloroethylene (TCE) was developed. The unique features of this novel microbial sensor were the use of the TCE degrading bacterium Pseudomonas aeruginosa JI104, the electrical detection of the chloride ion released by microbial degradation, and flow cell made of glass. Glass cell was used in order to suppress adsorption of TCE and made a closed reaction cell. Vaporization of TCE during the measurement was prevented using closed flow cell. The performance of the sensor was evaluated from following aspects; such as pH of the carrier solution, amount of the immobilized microbe, flow rate and injection volume. The sensor signals were linearly proportional to the concentration of TCE in the range from 0.03 to 2 mgl(-1), which is suitable for the determination of suspected samples to be drinkable water or not. The sensor performance was checked on the real sample, and this system showed good response in ground water, indicating its applicability for the on line monitoring at TCE contaminated areas or hazardous sites.     

Constituents of holothuroidea, 12. Isolation and structure of glucocerebrosides from the sea cucumber Holothuria pervicax

Ten glucocerebrosides, HPC-3-A-HPC-3-J, have been isolated from their obtained parent glucocerebroside molecular species HPC-3, together with other glucocerebroside molecular species HPC-1 and HPC-2, from the less polar lipid fraction of a chloroform/methanol extract of the sea cucumber Holothuria pervicax. The structures of these glucocerebrosides have been determined on the basis of chemical and spectroscopic evidence. Reversed-phase HPLC, including a recycling system, was effective in isolating these glucocerebrosides, revealing a very close resemblance in structure, though the problem due to regio-isomers remains.     

Re-revision of the stereo structure of piperidine lactone,an intermediate in the synthesis of febrifugine

The stereo structure of piperidine lactone (3), an intermediate of the antimalarial agent febrifugine ((+)-1) prepared by a synthetic method, was re-revised to the cis-form from the trans-form.     

Relationship between formation conditions, properties, and crystallite size of boehmite

Boehmites (gamma-AlOOH) with a variety of crystallite sizes were prepared under various precipitation conditions from solutions of aluminum nitrate and sodium aluminate and also by hydrothermal treatment of a commercial boehmite powder. The relationships between the crystallite size and other properties of the boehmites were investigated. Crystalline boehmite was formed in the pH range 7 to 10 while gels precipitated below pH 7 and bayerite (Al(OH)3) formed at pH 11. The crystallite size of the boehmite increased at higher pH, higher temperature of the precursor solution, and longer aging time. As the crystallite size of the boehmite increased, the specific surface area, pore volume, and excess water decreased. Boehmites of small crystallite size, called pseudoboehmite, showed broadened X-ray peak widths and increased d-spacing of the 020 reflection. These changes are attributed to the small crystallite size (smaller numbers of stacking layers) and also to excess water in the interlayers of the boehmite structure.     

Isolation, structure determination, and synthesis of neodysiherbaine A, a new excitatory amino acid from a marine sponge

[structure: see text] A new excitatory amino acid, neodysiherbaine A (2), was isolated as a minor constituent of the aqueous extract from the marine sponge Dysidea herbacea. The structure was deduced by spectroscopic methods and established unambiguously by the total synthesis. The present synthesis, including as a key step cross-coupling of the 6/5-bicyclic core with an amino acid residue, is useful in constructing its structural analogues.     

Threshold Conditions for Bulk Second-Order Nonlinearity and Near-Surf ace Second-Order Nonlinearity in Thermally Poled Infrasil Silica

Generation of bulk second-order nonlinearity in silica glass requires higher poling temperature or longer poling time than that of near-surface second-order nonlinearity. The threshold conditions for initiating the bulk second-order nonlinearity are studied on Infrasil fused silica glass. The threshold poling time is strongly dependent on the poling temperature. The near-surface second-order nonlinearity is also studied, especially the dependence of thickness of the nonlinear layer on the poling temperature, poling voltage and poling time. Secondary-ion mass-spectroscopy measurement showed depletion of Na⁺ ions at the anodic surface. We assume there is an ionic wave during poling traveling from the anodic surface to generate the dipolar electric field that induces the near-surface second-order nonlinearity.     

Observation of vacuum-ultraviolet Kr(2)* laser oscillation pumped by a compact discharge device

We have demonstrated vacuum-ultraviolet (VUV) Kr(2) * laser oscillation as a result of the realization of a stable self-sustained discharge of high-pressure Kr by use of a compact discharge device. Glow discharge was obtained with as much as 10 atm of pure Kr. The VUV emission intensity centered at 147.8 nm abruptly increased when the charging voltage exceeded a certain value. In addition to this threshold behavior, considerable spectral narrowing (4.0?0.4 nm) was observed when the charging voltage increased. The maximum output energy at 148 nm was 150muJ . The gain coefficient was estimated to be 1.1% cm (-1) .     

Polycyclic N‐Heterocyclic Compounds. 56 Reaction of N‐(5,6‐Dihydro[1]benzoxepino[5,4‐d]pyrimidin‐4‐yl)amidine or Its Amide Oxime Derivatives with Hydroxylamine Hyrdochloride

The reactions of N‐(5,6‐dihydro[1]benzoxepino[5,4‐ d]pyrimidin‐4‐yl)amidines or its amide oxime derivatives with hydroxylamine hydrochloride gave abnormal cyclization products via a ring cleavage of pyrimidine component accompanied with a ring closure of [1,2,4]oxadiazole.