High-resolution infrared spectrum of the ν2 and ν8 bands of CH2D2

A high-resolution infrared spectrum of methane-d₂ has been measured in the C-D stretching band region (2025–2435 cm^?1). Rotational structures of the ν₂ and ν₈ bands have been assigned by use of the ASSIGN-diagram method, and the c-type Coriolis interaction between ν₂ and ν₈ has been analyzed. The band origins, ν₂ = 2203.22 ± 0.01 cm^?1 and ν₈ = 2234.70 ± 0.01 cm^?1, the rotational constants and the centrifugal distortion constants for the two bands, and the Coriolis coupling constant, $\text{∥;ξ}{}_{28}{}^{\mathrm{c}}\text{∥; = 0.182 ± 0.015}\text{cm}{}^{\mathrm{?1}}$, have been determined.     

Dilatometric studies of reaction volumes for the formation of metal complexes in several solvents

A convenient technique is described to determine reaction volumes by means of direct dilatometry. Reaction volumes were determined for the following complexation reactions: formation of monoamminenickel(II) in water (–0.1±0.5 cm³-mol^–1); formation of the 1:1 nickel(II) complex with isoquinoline in methanol and ethanol (3.2±0.1 and 1.1±0.1 cm³-mol^–1, respectively); formation of the 1:1 isothiocyanatoiron(III) complex in water, Me₂SO, and DMF (8.9±0.2, 12.4±0.7, and 25.1±0.3 cm³-mol^–1, respectively); formation of the 18-crown-6 potassium complex in water (10.9±0.2 cm³-mol^–1). We discussed these values in terms of electrostriction and molecular size.     

Reaction of prostacyclin methyl ester with benzenesulfenyl chloride preparation of stable prostacyclin analogs

Several phenyl sulfides including stable 5- and 7-phenylthioprostacyclins were obtained by the reaction of the vinyl ether ($\text{1}$) and prostacyclin methyl ester ($\text{5}$) with PhSCl.     

A new synthetic method of 3-acyltetronic acid derivatives and its application to the synthesis of isoaspertetronin a (isogregatin A)

A new synthetic method of 3-acyltetronic acid derivatives from the corresponding 3-bromo compound via lithiation with n-BuLi followed either by acylation with acid chloride or better by first reacting with aldehyde and then subsequent oxidation with active MnO₂ is described. A revised structure $\text{10}$ for aspertetronin A(gregatin A) was presented based on the synthesis of the proposed structure $\text{8}$ and spectral comparison of a model compound $\text{12}$ with the natural product.     

Sequential peptide ligation by using a controlled cysteinyl prolyl ester (CPE) autoactivating unit

A peptide building block containing a cysteinyl prolyl ester (CPE) autoactivating unit was ligated with a cysteinyl peptide under native chemical ligation conditions. The CPE autoactivating function can be controlled by the protection of the thiol group, permitting the selective ligation of the peptide building block at either the C or N terminus.     

Regiocontrolled Syntheses of 3- or 5-Fluorinated Pyrazoles from 2,2-Difluorovinyl Ketones(1)

2,2-Difluorovinyl ketones 1 react with monosubstituted hydrazines to afford 5-fluoropyrazoles in a regioselective manner via replacement of the fluorine by the substituted nitrogen of the hydrazines and dehydration between the carbonyl group of 1 and the NH(2) end. The reactions are successfully effected for both aliphatic and aromatic hydrazines in aqueous ethanol under neutral conditions and in THF under basic conditions with butyllithium, respectively. A similar ring-forming reaction of 1 with hydrazine monohydrate is induced by the addition of trifluoroacetic acid to give N-unsubstituted 3-fluoropyrazoles, which in turn react with alkyl and aryl halides in the presence of sodium hydride, leading to a regiocontrolled synthesis of 3-fluoropyrazoles.     

Prostaglandin chemistry—VIII : Synthesis of optically active 7-oxoprostaglandins

Regiospecific α-acylation of β-alkenylated enolates generated by conjugate addition of lithium organocuprates to α,β-unsaturated ketones is described. Several new 7-oxoprostaglandin analogues, 7-oxoprostaglandin E₁ (18), 11-deoxy-7-oxoprostaglandin E₁ (23), and their 15-epi enantiomers 17 and 22, were synthesized by conjugate addition-acylation method. From optically active 4(R) -t - butyldimethylsiloxycyclopent - 2 - en - 1 - one (R-11), 7-oxoprostaglandin E₁ (18) was synthesized. Determination of the absolute configuration of 11-deoxy-7-oxoprostaglandin E₁ (23) and its 15-epi enantiomer (22) on the basis of CD study is described. Successful acylation of β-alkenylated lithium copper enolates with reactive acylating agents such as thiol esters and N-acyl imidazole as well as acyl halides is described.     

Interaction of crosslinked polyethylenimine with a homologous series of methyl orange derivatives in aqueous solution

Polyethylenimine (PEI) was crosslinked with dichloroethane, glyoxal, or glutaraldehyde and polymers of various degrees of crosslinkage were made. The insoluble polymers obtained were examined for their ability to bind methyl orange and its homologs, methyl, ethyl, propyl, and butyl orange at 5, 15, 25, and 35°C, respectively, in an aqueous solution. PEI crosslinked with glutaraldehyde showed markedly increased binding affinity toward these cosolutes compared with the polymers crosslinked with dichloroethane or glyoxal. The extent of the binding increased with an increase in the degree of crosslinkage. These results suggest that the enhancement of the binding by the crosslinking is due mainly to a dual effect, introduction of hydrophobic moieties and proximity of neighboring polymer chains. The first binding constants and the thermodynamic parameters that accompanied the binding were calculated. The thermodynamic data show that the binding process is athermal and is stabilized entirely by the entropy term. Water-soluble PEI exhibited stronger cooperative interactions than the crosslinked polymer because the mobilities of the chains of the former are greater than those of the latter.     

Interaction of crosslinked polyvinylpyrrolidone with a homologous series of methyl orange derivatives in aqueous and nonaqueous solutions: Thermodynamics of the binding equilibria

The extent of binding of methvI orange, ethyl orange, propyl orange, and butyl orange by crosslinked polyvinylpyrrolidone was measured in all aqueous Solution. The first binding constants and the thermodynamic parameters accompanying the binding were evaluated. These values were compared with those of water-soluble polyvinylpyrrolidone. The first binding constant, the absolute magnitude of ΔF°, and the value of ΔS° of the crosslinked polyvinylpyrrolidone are substantially larger than those of the water-soluble product for any particular dye. These behaviors can be accounted for in terms of increased hydrophobic domains in the former and enhanced hydrophobic contribution in the binding process. Also the binding of the dye by the crosslinked polymer in a nonaqueous solvent, ethylene glycol, was measured to assess the contribution of hydrophobic interaction to the dye-polymer complex formation in aqueous medium. It was found that the binding of butyl orange by the crosslinked polymer is suppressed in ethylene glycol and the contribution of entropy term to the free energy change in the aqueous environment is large compared with that in ethylene glycol. The significance of the hydrophobic of the hydrophobic interaction in the dye-polymer association process is described.     

A study of the formation of LiNbO3 in the system Li2CO3Nb2O5

The formation process of LiNbO₃ in the system Li₂CO₃Nb₂O₅ was discussed from the results of non-isothermal or isothermal TG experiments and X-ray analysis. The mixture Li₂CO₃ and Nb₂O₅ in mole ratios of 1:3, 1:1 or 3:1 was heated at a rate of 5°C min^?1 or at various temperatures fixed in the range 475 to 677°C. If the system has a composition of Li₂CO₃ + 3Nb₂O₅ or 3Li₂CO₃ + Nb₂O₅, the reaction between Li₂CO₃ and Nb₂O₅ proceeds with CO₂ evolution to form LiNbO₃ at ca. 300–600°C, but Nb₂O₅ or Li₂CO₃ remains unreacted. A composition of Li₂CO₃ + Nb₂O₅ gives LiNbO₃ at 300–700°C. The diffusion of Li₂O through the layer of LiNbO₃ is rate-controlling with an activation energy of 51 kcal mol^?1. The reaction between LiNbO₃ and Nb₂O₅ gives LiNb₃O₈ at 600–700°C. At 700–800°C, a slight formation of Li₃NbO₄ occurs by the reaction between LiNbO₃ and Li₂O at the outer surface of LiNbO₃ and the Li₂O component of Li₃NbO₄ diffuses toward the boundary of the LiNb₃O₈ layer through the LiNbO₃ layer. The single phase of LiNbO₃ is formed above 850°C.