Carbon Species and Precise Elemental Analysis of Precursors for Superconducting (Bi,Pb)2Sr2Ca2Cu3Ox Tapes

 The chemical composition of BiPbSrCaCuO precursors prepared by different syntheses has to be checked analytically before further application to production of superconducting (Bi,Pb)₂Sr₂Ca₂Cu₃O_x tapes. Carbon species in concentrations below 0,1%(w/w) were observed to be possibly a source of gas evolving reactions during the heat treatment procedures for the superconducting phase formation. A method that allows the temperature controlled detection of CO₂ resulting from reactions of various carbon species was developed based on an commercial C/H₂O-analyser with IR gas detectors. By means of this method it is possible to relate the carbon content to the conditions of synthesis and technological steps of the tape production. The phase formation mechanism of the superconducting (Bi,Pb)2223 phase from a multiphase precursor strongly depends on its elemental composition. Titrimetric and ICP spectrometric methods that allow the determination of the content of the main components Bi, Pb, Ca, Sr, and Cu with high precision and accuracy were developed and their results were compared. The best results were obtained with a combined chemical-spectrometric procedure. The relative standard deviations (RSD) for all metallic elements do not exceed 1%. The analytical results of the main components and specific trace determinations are essential for the functioning of superconducting tapes.     

Short and stereoselective synthesis of C-glycosylated glycine derivatives from glycals by radical addition and reduction

Only three steps are required for the convenient synthesis of 2-C-branched glyco-amino acids from glycals with good yields and stereoselectivities.     

Synthesis and properties of crosslinked polyvinylformamide and polyvinylamine hydrogels in conjunction with silica particles

Polyvinylamine hydrogels with silica particles encapsulated (PVAm/silica) were produced by a two‐step synthesis. In the first step, polyvinylformamide/silica (PVFA/silica) hybrids were synthesized from vinylformamide (VFA) and 1,3‐divinylimidazolidin‐2‐one (1,3‐bisvinylethyleneurea, BVU), as the crosslinker, by radical copolymerization in silica/water suspensions using different compositions of VFA/BVU. The target product PVAm/silica was obtained by acidic hydrolysis of the PVFA/silica hydrogels in a second step. The chemical structures of both hydrogels, PVFA/silica and PVAm/silica, respectively, were revealed by solid‐state ¹³C(¹H) cross‐polarity/magic‐angle spinning NMR spectroscopy. Both hydrogels swelled significantly in water. The swelling capacity of the two systems was characterized by the correlation length ξ (or hydrodynamic blob size) of the network meshes with small‐angle neutron scattering experiments. ξ is significantly larger for PVAm/silica than for PVFA/silica, which corresponds to the observed higher swelling capacity of this polyelectrolyte material. Furthermore, the swelling behavior of the hybrid hydrogels was quantitatively described in terms of free swell capacity, centrifuge‐retention capacity, adsorption against pressure, and free swell rate as compared with values of the corresponding copolymer hydrogels. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3144–3152, 2002     

Gas chromatographic determination of aromatic amines in water samples after solid-phase extraction and derivatization with iodine: I. Derivatization

A new method for the selective determination of aromatic amines is presented, which is based on the solid-phase extraction at pH 9 and subsequent derivatization of the analytes to the corresponding iodobenzenes. These can selectively and sensitively be determined with gas chromatography and electron-capture detection. Separation of at least 30 compounds in a single chromatographic run in 30 min is possible. With this method, 56 aromatic amines were investigated, and only in six cases no derivatives were obtained. Limits of quantitation were between 0.5 and 8 μg l⁻¹, but may still be lowered with higher sample volumes or different injection techniques. The application to water samples revealed the suitability for the investigation of ground, leachate and wastewater.     

N-methylpiperazinocarbonyl-2',3'-BcNA and 4'-C-(N-methylpiperazino)methyl-DNA: introduction of basic functionalities facing the major groove and the minor groove of a DNA:DNA duplex

Piperazino-functionalized 2',3'-BcNA and 4'-C-hydroxymethyl-DNA are appropriate molecular architectures for the introduction of basic functionalities facing the major groove and the minor groove of nucleic acid duplexes, respectively. 4'-C-(N-Methylpiperazino)methyl-DNA monomers induce significantly increased thermal stability of a DNA:DNA duplex.     

Affinity Polymers Tailored for the Protein A Binding Site of Immunoglobulin G Proteins

Rational design in combination with a screening process was used to develop affinity polymers for a specific binding site on the surface of immunoglobulin G (IgG) proteins. The concept starts with the identification of critical amino acid residues on the protein interface and their topological arrangement. Appropriate binding monomers were subsequently synthesized. Together with a sugar monomer (2–5 equiv) for water solubility and a dansyl monomer (0.5 equiv) as a fluorescent label, they were subjected in aqueous solution to linear radical copolymerization in various compositions (e.g., azobisisobutyronitrile (AIBN), homogeneous water/DMF mixtures). After ultrafiltration and lyophilization, colorless dry water‐soluble powders were obtained. NMR spectroscopic and gel permeation chromatography (GPC) characterization indicated molecular weights between 30 and 500 kD and confirmed retention of monomer composition as well as the absence of monomers. In a competitive enzyme‐linked immunosorbent assay (ELISA) screen of the polymer libraries (20–50 members), few copolymers qualified as strong and selective binders for the protein A binding site on the Fc fragment of the antibody. Their monomer composition precisely reflected the critical amino acids found at the interface. The simple combination of a charged and a nonpolar binding monomer sufficed for selective submicromolar IgG recognition by the synthetic polymer. Affinities were confirmed by fluorescence titrations; they increased with decreasing salt load but remained largely unaltered at lowered pH. Other proteins, including those of similar size and isoelectric point (pI), were bound 10–1000 times less tightly. This example indicates that interaction domains in other proteins may also be targeted by synthetic polymers if their comonomer composition reflects the nature and arrangement of amino acid residues on the protein surface.     

C,C‐ and N,C‐Coupled Dimers of 2‐Aminotetraphenylporphyrins: Regiocontrolled Synthesis,Spectroscopic Properties,and Quantum‐Chemical Calculations

β,β′‐Bisporphyrins are intrinsically chiral porphyrin dimers with fascinating properties. The configurational stability at their axes can be directed by variation of the central metal atoms. Herein, we present a regioselective functionalization of the monomeric 2‐amino‐tetraphenyl‐porphyrin as a versatile substrate for dimerization by oxidative coupling. By simple variation of the reaction conditions (solvent and oxidant), the oxidation selectively gave either the axially chiral C,C‐coupled diaminobisporphyrin in high yields or, under Ullmann conditions, the twofold N,C‐linked achiral dimer, also in good yields. A generalized mechanism for the coupling reaction is proposed based on DFT calculations. The axially chiral β,β′‐coupled porphyrin dimers were isolated as racemic mixtures, but can be resolved by HPLC on a chiral phase. TDDFT and coupled‐cluster calculations were used to explain the spectroscopic properties of the aminoporphyrins and their dimers and to elucidate the absolute configurations of the C,C‐coupled bisporphyrins.     

Enzymatic Conversion of Flavonoids using Bacterial Chalcone Isomerase and Enoate Reductase

Flavonoids are a large group of plant secondary metabolites with a variety of biological properties and are therefore of interest to many scientists, as they can lead to industrially interesting intermediates. The anaerobic gut bacterium Eubacterium ramulus can catabolize flavonoids, but until now, the pathway has not been experimentally confirmed. In the present work, a chalcone isomerase (CHI) and an enoate reductase (ERED) could be identified through whole genome sequencing and gene motif search. These two enzymes were successfully cloned and expressed in Escherichia coli in their active form, even under aerobic conditions. The catabolic pathway of E. ramulus was confirmed by biotransformations of flavanones into dihydrochalcones. The engineered E. coli strain that expresses both enzymes was used for the conversion of several flavanones, underlining the applicability of this biocatalytic cascade reaction.     

Rapid Autoxidation Forms Highly Oxidized RO2 Radicals in the Atmosphere

Gas‐phase oxidation routes of biogenic emissions, mainly isoprene and monoterpenes, in the atmosphere are still the subject of intensive research with special attention being paid to the formation of aerosol constituents. This laboratory study shows that the most abundant monoterpenes (limonene and α‐pinene) form highly oxidized RO₂ radicals with up to 12 O atoms, along with related closed‐shell products, within a few seconds after the initial attack of ozone or OH radicals. The overall process, an intramolecular ROO→QOOH reaction and subsequent O₂ addition generating a next R′OO radical, is similar to the well‐known autoxidation processes in the liquid phase (QOOH stands for a hydroperoxyalkyl radical). Field measurements show the relevance of this process to atmospheric chemistry. Thus, the well‐known reaction principle of autoxidation is also applicable to the atmospheric gas‐phase oxidation of hydrocarbons leading to extremely low‐volatility products which contribute to organic aerosol mass and hence influence the aerosol–cloud–climate system.     

Uncertainty measurement for automated macro program-processed quantitative proton NMR spectra

The evaluation of a fully automated quantitative proton nuclear magnetic resonance spectroscopy (qNMR) processing program, including the determination of its processing uncertainty, and the calculations of the combined uncertainty of the qNMR result, is presented with details on the use of a trimmed purity average. Quantitative NMR spectra (1359) were collected over a 4-month period on various concentrations of pseudoephedrine HCl dissolved in D₂O (0.0610 to 93.60 mg/mL) containing maleic acid (the internal standard) to yield signal-to-noise ratios ranging from 3 to 72,000 for analyte integral regions. The resulting 5436 purities exhibited a normal distribution about the best estimate of the true value. The median absolute deviation (MAD) statistical method was used to obtain a model of uncertainty relative to the signal-to-noise of the analyte’s integral peaks. The model was then tested using different concentrations of known purity chloroquine diphosphate. qNMR results of numerous illicit heroin HCl samples were compared to those obtained by capillary electrophoresis. Graphical Abstract

?