Structural variability in transition metal oxide clusters: gas phase vibrational spectroscopy of V3O(6-8)+

We present gas phase vibrational spectra of the trinuclear vanadium oxide cations V(3)O(6)(+)·He(1-4), V(3)O(7)(+)·Ar(0,1), and V(3)O(8)(+)·Ar(0,2) between 350 and 1200 cm(-1). Cluster structures are assigned based on a comparison of the experimental and simulated IR spectra. The latter are derived from B3LYP/TZVP calculations on energetically low-lying isomers identified in a rigorous search of the respective configurational space, using higher level calculations when necessary. V(3)O(7)(+) has a cage-like structure of C(3v) symmetry. Removal or addition of an O-atom results in a substantial increase in the number of energetically low-lying structural isomers. V(3)O(8)(+) also exhibits the cage motif, but with an O(2) unit replacing one of the vanadyl oxygen atoms. A chain isomer is found to be most stable for V(3)O(6)(+). The binding of the rare gas atoms to V(3)O(6-8)(+) clusters is found to be strong, up to 55 kJ/mol for Ar, and markedly isomer-dependent, resulting in two interesting effects. First, for V(3)O(7)(+)·Ar and V(3)O(8)(+)·Ar an energetic reordering of the isomers compared to the bare ion is observed, making the ring motif the most stable one. Second, different isomers bind different number of rare gas atoms. We demonstrate how both effects can be exploited to isolate and assign the contributions from multiple isomers to the vibrational spectrum. The present results exemplify the structural variability of vanadium oxide clusters, in particular, the sensitivity of their structure on small perturbations in their environment.     

Comparison of the photoelectrochemical oxidation of methanol on rutile TiO2 (001) and (100) single crystal faces studied by intensity modulated photocurrent spectroscopy

The photooxidation of methanol as a model substance for pollutants on rutile TiO(2) (001) and (100) surfaces was investigated using intensity modulated photocurrent spectroscopy (IMPS). The results are analyzed in view of the influence of the surface structure, the methanol concentration and the electrode potential on the rate constants of charge transfer and recombination. The obtained results have been explained with a model combining the theory of IMPS for a bulk semiconductor surface and the nature of the surface-bound intermediates (alternatively mobile or immobile OH˙ radicals). The results indicate that water photooxidation proceeds via mobile OH˙ radicals on both surfaces, while methanol addition gives rise to the involvement of immobile OH˙ radicals on the (100) surface. Detailed analysis in view of the surface structures suggests that the latter observation is due to efficient electron transfer from bridging OH˙ radicals on the (100) surface to methanol, while coupling of two of these radicals occurs in the absence of methanol, making them appear as mobile OH˙ radicals. In the case of the (001) surface, the coupling reaction dominates even in the presence of methanol due to the smaller distance between the bridging OH˙ radicals, leading to more efficient water oxidation, but less efficient methanol photooxidation on this surface.     

Controlled synthesis of cell-laden microgels by radical-free gelation in droplet microfluidics

Micrometer-sized hydrogel particles that contain living cells can be fabricated with exquisite control through the use of droplet-based microfluidics and bioinert polymers such as polyethyleneglycol (PEG) and hyperbranched polyglycerol (hPG). However, in existing techniques, the microgel gelation is often achieved through harmful reactions with free radicals. This is detrimental for the viability of the encapsulated cells. To overcome this limitation, we present a technique that combines droplet microfluidic templating with bio-orthogonal thiol-ene click reactions to fabricate monodisperse, cell-laden microgel particles. The gelation of these microgels is achieved via the nucleophilic Michael addition of dithiolated PEG macro-cross-linkers to acrylated hPG building blocks and does not require any initiator. We systematically vary the microgel properties through the use of PEG linkers with different molecular weights along with different concentrations of macromonomers to investigate the influence of these parameters on the viability and proliferation of encapsulated yeast cells. We also demonstrate the encapsulation of mammalian cells including fibroblasts and lymphoblasts.     

Wet Conversion of Methane and Carbon Dioxide in a DBD Reactor

The influence of water on the plasma assisted conversion of methane and carbon dioxide in a dielectric barrier discharge (DBD) plug flow reactor was studied. The plasma at atmospheric pressure was ignited by a power supply at a frequency of 13.56?MHz. Product formation was studied at a power range between 35 and 70?W. The concentrations of the three gases were altered and diluted with helium to 3?%. FTIR spectroscopy and mass spectroscopy were applied to analyze the inlet and the product streams. The main product of this process are hydrogen, carbon monoxide and ethane. Ethene, ethine, methanol and formaldehyde are generated beside the main products in this DBD in lower concentrations. The conversion of methane, the ratio of the synthesis gas components (n(H₂):n(CO)), and the yield of oxygenated hydrocarbons and hydrogen increases by adding water. The total consumed energy reaches lower values for small amounts of water. Additional water does not influence the generated amount of C2 hydrocarbons and of CO, but decreases the carbon dioxide conversion.     

Natural flavonoids interact with dinitrobenzene system in aprotic media: an electrochemical probing

Three structurally related natural flavonoids (FlOH), quercetin (Q), rutin (R) and morin (M), were investigated by cyclic voltammetry to probe their interactions with hazardous 1,4-dinitrobenzene (1,4-DNB) using a glassy carbon electrode. Scavenging of 1,4-DNB by FlOH was inferred from a positive shift in reduction potential, decrease in anodic peak current, and irreversible electrochemical behavior of 1,4-DNB on increasing the flavonoid concentration. The homogeneous bi-molecular rate constant (k2) was determined using the Nicholson-Shain equation and found to be higher for the dianion. Morin posed a comparatively higher k2 value for its interaction with the 1,4-DNB electrochemical system owing to its more acidic nature and least intramolecular hydrogen bonding. The cyclic voltammetric (CV) results were further supported by HyperchemPM3 quantum mechanical semi-empirical calculations, which point towards E(r)C(i) interactions between flavonoids and 1,4-DNB. The present investigation is biologically significant in terms of natural flavonoidal scavenging activity toward toxins such as dinitroaromatics.     

Recent advances in the stereoselective synthesis of carbohydrate 2-C-analogs

C-branched carbohydrates are of current interest for glycochemistry, are widely found in nature and serve as important subunits in many antibiotics, bacterial polysaccharides and macrolides. Among C-functionalized saccharides, 2-C-branched carbohydrates represent challenging structures for synthetic chemists, since in contrast to C-glycosides they are not easily accessible from glycosyl bromides or other simple precursors. In this perspective we want to summarize recent approaches to 2-C-branched carbohydrates over the past fifteen years. The two main strategies are based on ring-opening of 1,2-cyclopropanated carbohydrates by various reagents, as well as radical additions to glycals and further transformations, developed in our group. Both methods are characterized by high stereoselectivities and good yields and give access to a broad variety of functionalized carbohydrate 2-C-analogs.     

m-Fold Hypergeometric Solutions of Linear Recurrence Equations Revisited

We present two algorithms to compute m-fold hypergeometric solutions of linear recurrence equations for the classical shift case and for the q-case, respectively. The first is an m-fold generalization and q-generalization of the algorithm by van Hoeij (Appl Algebra Eng Commun Comput 17:83–115, 2005; J. Pure Appl Algebra 139:109–131, 1998) for recurrence equations. The second is a combination of an improved version of the algorithms by Petkovšek (Discrete Math 180:3–22, 1998; J Symb Comput 14(2–3):243–264, 1992) for recurrence and q-recurrence equations and the m-fold algorithm from Petkovšek and Salvy (ISSAC 1993 Proceedings, pp 27–33, 1993) for recurrence equations. We will refer to the classical algorithms as van Hoeij or Petkovšek respectively. To formulate our ideas, we first need to introduce an adapted version of an m-fold Newton polygon and its characteristic polynomials for the classical case and q-case, and to prove the important properties in this case. Using the data from the Newton polygon, we are able to present efficient m-fold versions of the van Hoeij and Petkovšek algorithms for the classical shift case and for the q-case, respectively. Furthermore, we show how one can use the Newton polygon and our characteristic polynomials to conclude for which m ? \mathbbN{m\in \mathbb{N}} there might be an m-fold hypergeometric solution at all. Again by using the information obtained from the Newton polygon, the presentation of the q-Petkovšek algorithm can be simplified and streamlined. Finally, we give timings for the ‘classical’ q-Petkovšek, our q-van Hoeij and our modified q-Petkovšek algorithm on some classes of problems and we present a Maple implementation of the m-fold algorithms for the q-case.