Charge ordering in the electron doped Ca1−xYxMnO3 manganites

Structural studies on the electron doped Ca_1−xY_xMnO₃ are presented. At 300 K, orthorhombic O-phase was observed in all cases, associated to low electric resistivity and high Curie–Weiss temperature. For samples with x>0.07, structural phase transitions to more distorted orthorhombic and monoclinic phases were found at T<170K. In these phases only weak ferromagnetic interactions were observed.     

Theoretical study on the electronic,structural, properties and reactivity of a series of mono-, di-, tri- and tetrachlorothiophenes as well as corresponding radical cation forms as monomers for conducting polymers

In this paper, electrical and structural properties of mono-, di-, tri- and tetrachlorothiophenes and their radical cations have been studied using the density functional theory and B3LYP method with 6-311++G** basis set. The effects of the number and position of the substituent of chlorine atoms on the properties of the thiophene ring for all chlorothiophenes and their radical cations have been studied. Vibrational frequencies, nuclear chemical shielding constants, spin-density distribution, size and direction of dipole moment vector, ionization potential, electric polarizabilities and NICS values of these compounds have been calculated as well. The analysis of these data showed that double bonds in 3-chlorothiophene are more delocalized and it is the best possible candidate monomer among all chlorothiophenes for the synthesis of corresponding conducting polymers with modified characteristics.     

Poly(phenylsilsesquioxane)s: Structural and morphological characterization

Poly(phenylsilsesquioxane) (PPSQ) polymers that were obtained from different synthetic routes were comparatively studied. The polymers were characterized by infrared and solid‐state ²⁹Si NMR spectroscopies. According to the results of X‐ray diffraction and thermogravimetric analyses, the materials richest in silanol showed a less organized network and lower weight loss temperature. The morphology of the products was influenced by the preparation conditions. PPSQ, with a morphology rich in spherical particles, was achieved with an n‐hexadecyltrimethylammonium bromide template in the reaction medium, whereas the morphology of this polymer obtained in the absence of the template was featureless. Small‐angle X‐ray scattering analyses revealed that the PPSQ samples showed a predominance of surface‐fractal behavior. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 1580–1589, 2000     

Synthesis and cytotoxicity of 28-carboxymethoxy lupane triterpenoids.Preference of 28-O-acylation over 28-O-alkylation of betulm by ethyl bromoacetate

28-Carboxymethoxy lupane tritepenoids 3 and 4 were synthesized by alkylation of betulin with the THP protected 2- hydroxyethyl iodide followed by oxidation and reduction.Direct reaction of betulin(5) or betulone(10) with ethyl bromoacetate led to 28-O-acylation,instead of 28-O-alkylation.The targeted compounds 3 and 4 were not cytotoxic at the highest concentration tested(75μmol/L),suggesting that elongation of the chain length at the 28-position in both betulinic acid(1) and betulonic acid(2) was detrim...     

SELF-SIMILAR CRACK EXPANSION METHOD FOR THE STRESS INTENSITY FACTOR ANALYSIS

The Self-Similar Crack Expansion (SSCE) method is proposed to evaluate stress intensi-ty factors at crack tips, whereby stress intensity factors of a crack can be determined by the crackopening displacement over the crack, not just by the local displacement around the crack tip. The crackexpansion rate is estimated by taking advantage of the crack self-similarity. Therefore, the accuracy ofthe calculation is improved. The singular integrals on crack tip elements are also analyzed and are pre-cisely evaluated in terms of a special integral analysis. Combination of these two techniques greatly in-creases the accuracy in estimating the stress distribution around the crack tip. A variety of two-dimen-sional cracks, such as subsurface cracks, edge cracks, and their interactions are calculated in terms ofthe self-similar expansion rate. Solutions are satisfied with errors less than 0.5% as compared with theanalytical solutions. Based on the calculations of the crack interactions, a theory for crack interactionsis proposed such that for a group of aligned cracks the summation of the square of SIFs at the right tipsof cracks is always equal to that at the left tips of cracks. This theory was proved by the mehtod ofSelf-Similar Crack Expansion in this paper.     

Temperature dependence of molecular dynamics and supramolecular aggregation in MEH-PPV films: A solid-state NMR, X-ray and fluorescence spectroscopy study

This article presents an investigation of the temperature induced modification in the microstructure and dynamics of poly[2-methoxy-5-(2′-ethylhexyloxy)-1,4-phenylenevinylene] (MEH-PPV) cast films using Wide-Angle X-ray Scattering (WAXS), solid-state Nuclear Magnetic Resonance (NMR), and Fluorescence Spectroscopy (PL). MEH-PPV chain motions were characterized as a function of temperature by NMR. The results indicated that the solvent used to cast the films influences the activation energy of the side-chain motions. This was concluded from the comparison of the activation energy of the toluene cast film, E_a = (54 ± 8) kJ/mol, and chloroform cast film, E_a = (69 ± 5) kJ/mol, and could be attributed to the higher side-chain packing provided by chloroform, that preferentially solvates the side chain in contrast to toluene that solvates mainly the backbone. Concerning the backbone mobility, it was observed that the torsional motions in the MEH-PPV have average amplitude of ∼10° at 300 K, which was found to be independent of the solvent used to cast the films. In order to correlate the molecular dynamics processes with the changes in the microstructure of the polymer, in situ WAXS experiments as a function of temperature were performed and revealed that the interchain spacing in the MEH-PPV molecular aggregates increases as a function of temperature, particularly at temperatures where molecular relaxations occur. It was also observed that the WAXS peak associated with the bilayer spacing becomes narrower and its intensity increases whereas the peak associated with the interbackbone planes reduces its intensity for higher temperatures. This last result could be interpreted as a decrease in the number of aggregates and the reduction of the interchain species during the MEH-PPV relaxation processes. These WAXS results were correlated with PL spectra modifications observed upon temperature treatments.     

EFFECT OF COMPOSITION AND PROCESSING CONDITION ON MICROSTRUCTURAL PROPERTIES AND DURABILITY OF FLUOROPOLYMER/ACRYLIC BLENDS

Fluoropolymer blends have been widely used as binders for exterior coatings because of their excellent resistance to ultra-violet (UV) radiation as well as to many corrosive chemical agents.It is known that the fluorinated component usually has a lower glass transition temperature and easily crystallizes in the final structure depending upon the blend composition and sample annealing condition.We investigated the effect of blend composition and annealing process (slow and fast cooling) on the surface mor...     

Influence of Cd Content and Se Doping on the Formation of CdSe Nanocrystals in Silica Xerogels: A SAXS Study

Small-angle X-ray scattering (SAXS) experiments were carried out to characterize the structure of the composite formed by CdSe nanocrystals embedded in a popous silica matrix (silica xerogels containing Cd with formamide addition and ultrasound treatment). SAXS results from samples before Se diffusion indicate the presence of heterogeneities with a bimodal size distribution which was associated to the existence of mesopores (pores of several hundred Å) immersed in a nanoporous matrix (characteristic pore radii of 20–30 Å). The diffusion of Se induces the nucleation and growth of CdSe nanocrystals. The average size of the nanocrystals increases with Cd content. Higher Se doses promote the formation of larger nanocrystals (radius of gyration of ∼30 to 50 Å). Anomalous scattering results confirm the existence of Se aggregation associated with CdSe nanocrystal formation and suggest that only partial segregation of Cd and Se occurs.     

Synthesis of In2O3nanoparticles by thermal decomposition of a citrate gel precursor

This paper describes the synthesis of indium oxide by a modified sol–gel method, and the study of thermal decomposition of the metal complex in air. The characterization of the intermediate as well as the final compounds was carried out by thermogravimetry, differential thermal analysis, Fourier transform infrared spectroscopy, X-ray diffraction, transmission electron microscopy, and small angle X-ray scattering. The results show that the indium complex decomposes to In₂O₃ with the formation of an intermediate compound. Nanoparticles of cubic In₂O₃ with crystallite sizes in the nanosize range were formed after calcination at temperatures up to 900°C. Calcined materials are characterized by a polydisperse distribution of spherical particles with sharp and smooth surfaces.     

Design and study of a high-current 5-cell superconducting rf cavity

The Advanced Photon Source （APS） at Argonne National Laboratory is considering the development of a superconducting linac-based fourth-generation hard X-ray source to meet future scientific needs of the hard X-ray user community. This work specifically focuses on the design of an optimized 5-cell superconducting radio-frequency structure well suited for a high-energy, high-beam-current energy recovery linac. The cavity design parameters are based on the APS storage ring nominal 7 GeV and 100 mA beam operation. A high-current 5-cell cw superconducting cavity operating at 1.4 GHz has been designed. In order to achieve a high current, the accelerating cavity shape has been optimized and large end-cell beam pipes have been adopted. The beam break-up threshold of the cavity has been estimated using the code TDBBU, which predicts a high threshold beam current for a 7 GeV energy recovery linac model. A copper prototype cavity has been fabricated that uses half-cell modules, initially assembled by clamping the cells together.