Spectrophotometric methods for quantifying pigmentation in human hair-influence of MC1R genotype and environment.

Eumelanin (brown/black melanin) and pheomelanin (red/yellow melanin) in human hair can be quantified using chemical methods or approximated using spectrophotometric methods. Chemical methods consume greater resources, making them less attractive for epidemiological studies. This investigation sought to identify the spectrophotometric measures that best explain the light-dark continuum of hair color and the measure that is best able to distinguish red hair from nonred hair. Genetic analysis was performed on these two measures to determine the proportion of genetic and environmental influences on variation in these traits. Reflectance curves along the visible spectrum and subjective ratings of hair color were collected from 1730 adolescent twin individuals. Discriminant class analyses were performed to determine the spectrophotometric measure that could best proxy for eumelanin and pheomelanin quantities. The ratio of light reflected in the green portion of the spectrum to that reflected in the red portion of the spectrum was best able to distinguish red hair from nonred hair. Melanocortin 1 receptor (MC1R) genotype explained some, but not all, variation in this measure. Light absorbed in the red portion of the spectrum was best able to explain the light-dark continuum of hair color. Variance components analysis showed that there were qualitatively different genetic influences between males and females for the light-dark continuum of hair. Our results show that spectrophotometric measures approximating variation in eumelanin and pheomelanin may be considered as an alternative to chemical methods in larger epidemiological studies.     

Electrophoresis-Assisted Multilayer Assembly of Nanoparticles for Sensitive Lateral Flow Immunoassay**

Lateral flow immunoassay (LFIA) is a rapid, simple, and inexpensive point-of-need method. A major limitation of LFIA is a high limit of detection (LOD), which impacts its diagnostic sensitivity. To overcome this limitation, we introduce a signal-enhancement procedure that is performed after completing LFIA and involves controllably moving biotin- and streptavidin-functionalized gold nanoparticles by electrophoresis. The nanoparticles link to immunocomplexes forming multilayer aggregates on the test strip, thus, enhancing the signal. Here, we demonstrate lowering the LOD of hepatitis B surface antigen from approximately 8 to 0.12 ng mL⁻¹, making it clinically acceptable. Testing 118 clinical samples for hepatitis B showed that signal enhancement increased the diagnostic sensitivity of LFIA from 73 % to 98 % while not affecting its 95 % specificity. Electrophoresis-driven enhancement of LFIA is universal (antigen-independent), takes two minutes, and can be performed by an untrained person.     

Bioinspired Design of a Giant [Mn86] Nanocage-Based Metal-Organic Framework with Specific CO2 Binding Pockets for Highly Selective CO2 Separation

Adsorption-based removal of carbon dioxide (CO₂) from gas mixtures has demonstrated great potential for solving energy security and environmental sustainability challenges. However, due to similar physicochemical properties between CO₂ and other gases as well as the co-adsorption behavior, the selectivity of CO₂ is severely limited in currently reported CO₂-selective sorbents. To address the challenge, we create a bioinspired design strategy and report a robust, microporous metal–organic framework (MOF) with unprecedented [Mn₈₆] nanocages. Attributed to the existence of unique enzyme-like confined pockets, strong coordination interactions and dipole-dipole interactions are generated for CO₂ molecules, resulting in only CO₂ molecules fitting in the pocket while other gas molecules are prohibited. Thus, this MOF can selectively remove CO₂ from various gas mixtures and show record-high selectivities of CO₂/CH₄ and CO₂/N₂ mixtures. Highly efficient CO₂/C₂H₂, CO₂/CH₄, and CO₂/N₂ separations are achieved, as verified by experimental breakthrough tests. This work paves a new avenue for the fabrication of adsorbents with high CO₂ selectivity and provides important guidance for designing highly effective adsorbents for gas separation.     

Electrocatalytic Determination of Sulfite at Immobilized Microdroplet Liquid|Liquid Interfaces: The EIC′ Mechanism

Liquid|liquid interfaces provide a natural boundary and a reactive interface where an organic phase is in contact with an aqueous analyte. The selectivity of ion transfer processes at liquid|liquid interfaces can help to provide sensitivity, introduce reactive reagents, or allow analyte accumulation at the electrode surface. In this study, microdroplet deposits of the organic liquid 4‐(3‐phenylpropyl)‐pyridine (PPP) with the ferrocenylmethyl‐dodecyldimethylammonium⁺ (FDA⁺) redox system are deposited onto a basal plane pyrolytic graphite electrode and employed to transfer anions from the aqueous into the organic phase. A clear trend of more hydrophobic anions transferring more readily (at more negative potentials) is observed and an ESI‐mass spectrometry method is developed to confirm the transfer. Subsequently, the electrocatalytic oxidation of sulfite, SO₃^2?, within the organic phase and in the presence of different electrolyte anions is investigated. Competition between sulfite transfer and inert anion transfer occurs. The electrocatalytic sulfite oxidation is suppressed in the presence of PF₆^? and occurs most readily in the presence of the hydrophilic nitrate anion. The resulting process can be classified as an electrocatalytic EIC′‐process (E: electron transfer; I: ion transfer; C: chemical reaction step). The effectiveness of the electrocatalytic process is limited by i) competition during anion transfer and ii) the liquid|liquid interface acting as a diffusion barrier. The analytical sensitivity of the method is limited to ca. 100 μM SO₃^2? (or ca. 8 ppm) and potential approaches for improvement of this limit are discussed.     

NMR study of 5-substituted pyrazolo[3,4-c]pyridine derivatives

Substituted pyrazolopyridines are potent inhibitors of phosphodiesterases and cyclin-dependent kinases. In this study, NMR was used to investigate the potential N1-H and N2-H tautomerism of 5-substituted pyrazolo[3,4-c]pyridine derivatives. Six compounds were fully characterized by using (1)H, (13)C, and (15)N chemical shifts and indirect (1)H--(13)C and (1)H--(15)N coupling constants. The (1)H NMR spectra were measured over a broad range of temperatures. All of the compounds were shown to exist predominantly in the N1-H tautomeric form. Complementary quantum-chemical calculations of the chemical shieldings and indirect spin-spin couplings support the structural conclusions drawn.     

Hydrophilic interaction chromatography/electrospray mass spectrometry analysis of carbohydrate-related metabolites from Arabidopsis thaliana leaf tissue

This work describes the development and application of an on-line liquid chromatography/mass spectrometry (LC/MS) method using hydrophilic interaction chromatography (HILIC) coupled to negative ion mode electrospray ionisation ion trap mass spectrometry (ESI-MS) for the analysis of highly polar carbohydrate-related metabolites commonly found in plants, ranging from reducing and non-reducing sugars and sugar alcohols to sugar phosphates. Using this method, separation and detection of a mixture of eight authentic standard compounds containing glucose (Glc), sucrose (Suc), raffinose, verbascose, mannitol, maltitol, glucose-6-phosphate (Glc6P) and trehalose-6-phosphate (Tre6P) were achieved in less than 15 min. The method is rapid, robust, selective, and sensitive, with limits of detection (LODs) ranging from 0.2 microM obtained for neutral sugars, to 1.0 microM obtained for sugar alcohols, and 2.0 microM obtained for negatively charged sugar phosphates. We have studied the negative ion collision-induced dissociation (CID) fragmentation behaviour of the non-reducing raffinose family oligosaccharides (RFOs) raffinose, stachyose, and verbascose. Mainly Bi and Ci glycosidic and Ai cross-ring structurally informative cleavages are observed. We have applied this HILIC/ESI-MS method for the analysis of Arabidopsis thaliana wild-type Columbia-0 (Col-0) and its starchless phosphoglucomutase mutant (pgm1) leaf extracts. The method was used to quantify Glc, Suc, raffinose, and Glc6P in A. thaliana extracts. Data obtained using this HILIC/ESI-MS method were compared with those obtained using a comparable porous graphitic carbon-based LC/ESI-MS method.     

Towards a universal product ion mass spectral library - reproducibility of product ion spectra across eleven different mass spectrometers

Product ion spectra produced by collision-induced dissociation (CID) in tandem mass spectrometry experiments can differ markedly between instruments. There have been a number of attempts to standardise the production of product ion spectra; however, a consensus on the most appropriate approach to the reproducible production of spectra has yet to be reached. We have previously reported the comparison of product ion spectra on a number of different types of instruments - a triple quadrupole, two ion traps and a Fourier transform ion cyclotron resonance mass spectrometer (Bristow AWT, Webb KS, Lubben AT, Halket JM. Rapid Commun. Mass Spectrom. 2004; 18: 1). The study showed that a high degree of reproducibility was achievable. The goal of this study was to improve the comparability and reproducibility of CID product ion mass spectra produced in different laboratories and using different instruments. This was carried out experimentally by defining a spectral calibration point on each mass spectrometer for product ion formation. The long-term goal is the development of a universal (instrument independent) product ion mass spectral library for the identification of unknowns.The spectra of 48 compounds have been recorded on eleven mass spectrometers: six ion traps, two triple quadrupoles, a hybrid triple quadrupole, and two quadrupole time-of-flight instruments. Initially, 4371 spectral comparisons were carried out using the data from eleven instruments and the degree of reproducibility was evaluated. A blind trial has also been carried out to assess the reproducibility of spectra obtained during LC/MS/MS.The results suggest a degree of reproducibility across all instrument types using the tuning point technique. The reproducibility of the product ion spectra is increased when comparing the tandem in time type instruments and the tandem in space instruments as two separate groups. This may allow the production of a more limited, yet useful, screening library for LC/MS/MS identification using instruments of the same type from different manufacturers.     

A simple DNase model system comprising a dinuclear Zn(II) complex in methanol accelerates the cleavage of a series of methyl aryl phosphate diesters by 10(11)-10(13)

The di-Zn(II) complex of 1,3-bis[ N1, N1'-(1,5,9-triazacyclododecyl)]propane with an associated methoxide ( 3:Zn(II) 2: (-)OCH 3) was prepared and its catalysis of the methanolysis of a series of fourteen methyl aryl phosphate diesters ( 6) was studied at s (s)pH 9.8 in methanol at 25.0 +/- 0.1 degrees C. Plots of k obs vs [ 3:Zn(II) 2: (-)OCH 3] free for all members of 6 show saturation behavior from which K(M) and kcat (max) were determined. The second order rate constants for the catalyzed reactions (kcat (max)/K(M)) for each substrate are larger than the corresponding methoxide catalyzed reaction (k 2 (-OMe)) by 1.4 x 10(8) to 3 x 10 (9)-fold. The values of k cat (max) for all members of 6 are between 4 x 10(11) and 3 x 10(13) times larger than the solution reaction at s (s)pH 9.8, with the largest accelerations being given for substrates where the departing aryloxy unit contains ortho-NO 2 or C(O)OCH 3 groups. Based on the linear Br?nsted plots of k cat (max) vs s (s)pKa of the phenol, beta lg values of -0.57 and -0.34 are determined respectively for the catalyzed methanolysis of "regular" substrates that do not contain the ortho-NO 2 or C(O)OCH 3 groups, and those substrates that do. The data are consistent with a two step mechanism for the catalyzed reaction with rate limiting formation of a catalyst-coordinated phosphorane intermediate, followed by fast loss of the aryloxy leaving group. A detailed energetics calculation indicates that the catalyst binds the transition state comprising [CH 3O (-): 6], giving a hypothetical [ 3:Zn(II) 2:CH 3O (-): 6] complex, by -21.4 to -24.5 kcal/mol, with the strongest binding being for those substrates having the ortho-NO 2 or C(O)OCH 3 groups.     

Synthesis and characterization of phase-pure manganese(II) and manganese(III) silicalite-2

Manganese silicalite-2 was synthesized at high pH using the molecular cluster Mn 12O 12(O 2CCH 3) 16 as a Mn source. The silicalite-2 (ZSM-11) materials were synthesized using 3,5-dimethyl- N, N-diethylpiperdinium hydroxide as a structure-directing agent to produce phase-pure ZSM-11 materials. No precipitation of manganese hydroxide was observed, and synthesis resulted in the incorporation of up to 2.5 mol % Mn into the silicalite-2 with direct substitution into the framework verified by the linear relationship between the unit cell volume and loading. The Mn is reduced to Mn (II) during hydrothermal synthesis and incorporated into the silicalite-2 framework during calcination at 500 degrees C. Further calcination at 750 degrees C does not affect the crystallinity but oxidizes essentially all of the Mn (II) to Mn (III) in the framework. The large difference in oxidation temperatures between the II and III oxidation states provides a means of producing relatively pure manganese(II) and manganese(III) silicalite-2 materials for applications such as catalysis.     

Superior effect of a pi-acceptor ligand (phosphine-electron-deficient olefin ligand) in the Negishi coupling involving alkylzinc reagents

Palladium-catalyzed Negishi cross-coupling involving primary and secondary alkyls, even in the presence of beta-H, can be achieved at ambient temperature using chelating ligands containing a phosphine and an electron-deficient olefin. The superior effects of the ligands were shown not only in the desired cross-coupling product yields but also in the fast reaction at mild conditions. This reaction has been also scaled up to 50 g in 0.005 mol % catalyst (20,000 TONs) at room temperature.