Direct Insight into the Three‐Dimensional Internal Morphology of Solid–Liquid–Vapor Interfaces at Microscale

Solid–liquid–vapor interfaces dominated by the three‐phase contact line, usually performing as the active center in reactions, are important in biological and industrial processes. In this contribution, we provide direct three‐dimensional (3D) experimental evidence for the inside morphology of interfaces with either Cassie or Wenzel states at micron level using X‐ray micro‐computed tomography, which allows us to accurately “see inside” the morphological structures and quantitatively visualize their internal 3D fine structures and phases in intact samples. Furthermore, the in‐depth measurements revealed that the liquid randomly and partly located on the top of protrusions on the natural and artificial superhydrophobic surfaces in Cassie regime, resulting from thermodynamically optimal minimization of the surface energy. These new findings are useful for the optimization of classical wetting theories and models, which should promote the surface scientific and technological developments.     

Direct Conversion of Bulk Metals to Size‐Tailored,Monodisperse Spherical Non‐Coinage‐Metal Nanocrystals

Monodisperse non‐noble metal nanocrystals (NCs) that are highly uniform in shapes and particle size are much desired in various advanced applications, and are commonly prepared by either thermal decomposition or reduction, where reactive organometallic precursors or/and strong reducing agents are mandatory; however, these are usually toxic, costly, or suffer a lack of availability. Bulk Group 12 metals can now be converted into ligand‐protected, highly crystalline, monodisperse spherical metal NCs with precisely controlled sizes without using any precursors and reducers. The method is based on low‐power NIR‐laser‐induced size‐selective layer‐by‐layer surface vaporization. The monodisperse Cd NCs show pronounced deep‐UV (DUV) localized surface plasmon resonance making them highly competitive DUV‐plasmonic materials. This approach will promote appreciably the emergence of a wide range of monodisperse technically important non‐coinage metal NCs with compelling functionalities.     

Solvent‐dependent structural dynamics of 2(1H)‐pyridinone in light absorbing S4(ππ*) state

The B‐band resonance Raman spectra of 2(1H)‐pyridinone (NHP) in water and acetonitrile were obtained, and their intensity patterns were found to be significantly different. To explore the underlying excited state tautomeric reaction mechanisms of NHP in water and acetonitrile, the vibrational analysis was carried out for NHP, 2(1D)‐pyridinone (NDP), NHP–(H₂O)_n (n = 1, 2) clusters, and NDP–(D₂O)_n (n = 1, 2) clusters on the basis of the FT‐Raman experiments, the B3LYP/6‐311++G(d,p) computations using PCM solvent model, and the normal mode analysis. Good agreements between experimental and theoretically predicted frequencies and intensities in different surrounding environments enabled reliable assignments of Raman bands in both the FT‐Raman and the resonance Raman spectra. The results indicated that most of the B‐band resonance Raman spectra in H₂O was assignable to the fundamental, overtones, and combination bands of about ten vibration modes of ring‐type NHP–(H₂O)₂ cluster, while most of the B‐band resonance Raman spectra in CH₃CN was assigned to the fundamental, overtones, and combination bands of about eight vibration modes of linear‐type NHP–CH₃CN. The solvent effect of the excited state enol‐keto tautomeric reaction mechanisms was explored on the basis of the significant difference in the short‐time structural dynamics of NHP in H₂O and CH₃CN. The inter‐molecular and intra‐molecular ESPT reaction mechanisms were proposed respectively to explain the Franck–Condon region structural dynamics of NHP in H₂O and CH₃CN.Copyright © 2015 John Wiley & Sons, Ltd.     

High-internal-phase-emulsion polymeric monolith coupled with liquid chromatography–electrospray tandem mass spectrometry for enrichment and sensitive detection of trace cytokinins in plant samples

High-internal-phase-emulsion polymers (polyHIPEs) show great promise as solid-phase-extraction (SPE) materials because of the tremendous porosity and highly interconnected framework afforded by the high-internal-phase-emulsion (HIPE) technique. In this work, polyHIPE monolithic columns as novel SPE materials were prepared and applied to trace enrichment of cytokinins (CKs) from complex plant samples. The polyHIPE monoliths were synthesized via the in-situ polymerization of the continuous phase of a HIPE containing styrene (STY) and divinylbenzene (DVB) in a stainless column, and revealed highly efficient and selective enrichment ability for aromatic compounds. Under the optimized experimental conditions, a method using a monolithic polyHIPE column combined with liquid chromatography–electrospray tandem mass spectrometry (LC–MS–MS) was developed for the simultaneous extraction and sensitive determination of trans-zeatin (tZ), meta-topolin (mT), kinetin (K), and kinetin riboside (KR). The proposed method had good linearity, with correlation coefficients (R ²) from 0.9957 to 0.9984, and low detection limits (LODs, S/N?=?3) in the range 2.4–47 pg mL^?1 for the four CKs. The method was successfully applied to the determination of CKs in real plant samples, and obtained good recoveries ranging from 68.8 % to 103.0 % and relative standard deviations (RSDs) lower than 16 %.     

Selective adsorption of metronidazole on conjugated microporous polymers

Conjugated microporous polymers (CMPs) have recently received extensive attention in oil/organic solvent-water separation field as a kind of ideal porous absorbents with tunable porosity, large surface areas, and super-hydrophobicity. However, reports on the application of CMPs in adsorption of hydrophilic contaminants from water are very few. In this work, we studied the adsorption of metronidazole (MNZ), a polar antibiotic, by two kinds of CMPs. The adsorption characteristics of MNZ by the CMPs, including adsorption kinetics, mechanism, and isotherm parameters were calculated. The adsorption kinetics of MNZ was well expressed by the pseudo-second-order model, and the adsorption process was found to be mainly controlled by film diffusion. The adsorption isotherm data agreed well with the Langmuir isotherm model, and the values of free energy E indicated that the adsorption nature of MNZ on the CMPs was physisorption. Increasing dispersion degree of the CMPs in MNZ solution resulted in greater adsorption. This work may provide fundamental guidance for the removal of antibiotics by CMPs.     

Preparation and Electrochemical Properties of Tin–Iron–Carbon Nanocomposite as the Anode of Lithium‐Ion Batteries

Tin–iron–carbon nanocomposite is successfully prepared by a sol–gel method followed by a chemical vapor deposition (CVD) process with acetylene gas as the carbon source. The structural properties, morphology, and electrochemical performances of the nanocomposite are comprehensively studied in comparison with those properties of tin–carbon and iron–carbon nanocomposites. Sheet‐like carbon architecture and different carbon contents are induced thanks to the catalytic effect of iron during CVD. Among three nanocomposites, tin–iron–carbon demonstrates the highest reversible capacity of 800 mA h g^?1 with 96.9 % capacity retention after 50 cycles. It also exhibits the best rate capability with a discharge capacity of 420 mA h g^?1 at a current density of 1000 mA g^?1. This enhanced performance is strongly related to the carbon morphology and content, which can not only accommodate the large volume change, but also improve the electronic conductivity of the nanocomposite. Hence, the tin–iron–carbon nanocomposite is expected to be a promising anode for lithium‐ion batteries.     

Plasmonic nano‐slits assisted polarization selective detour phase meta‐hologram

Traditional detour‐phase hologram is a powerful optical device for manipulating phase and amplitude of light, but it is usually not sensitive to the polarization of light. By introducing the light‐metasurface interaction mechanism to the traditional detour phase hologram, we design a novel plasmonic nano‐slits assisted polarization selective detour phase meta‐hologram, which has attractive advantages of polarization multiplexing ability, broadband response, and ultra‐compact size. The meta‐hologram relies on the dislocations of plasmonic slits to achieve arbitrary phase distributions, showing strong polarization selectivity to incident light due to the plasmonic response of deep‐subwavelength slits. To verify its polarization sensitive and broadband responses, we experimentally demonstrate two holographic patterns of an optical vortex and an Airy beam at p‐ and s‐polarized light with wavelengths of 532nm, 633nm and 780nm, respectively. Furthermore, we realize an application example of the meta‐hologram as a polarization multiplexed photonic device for multi‐channel optical angular momentum (OAM) generation and detection. Such meta‐holograms could find widespread applications in photonics, such as chip‐level beam shaping and high‐capacity OAM communication.