盐酸吡哆辛及其制剂的二阶导数差示脉冲极谱法定量研究

建立盐酸吡哆辛及其制剂的二阶导数差示脉冲极谱定量分析方法。盐酸吡哆辛在0.1mol/L氢氧化钠溶液-0.1moL/L磷酸二氢钾溶液-水(体积比为1.2:8.8:990)的混合溶液中,于-0.140V(vs·Ag/AgCl)处出现一良好的二阶导数差示脉冲极谱峰,盐酸吡哆辛浓度在3.6×10~(-4)～9.6×10~(-4)mol/L范围内与其峰幅值呈显著的线性关系(P<0.01),线性相关系数r=0.9997,检出限为9.0nmol/L。     

Measurements of FRET in a glucose-sensitive affinity system with frequency-domain lifetime spectroscopy

We report measurements of fluorescence resonance energy transfer (FRET) for glucose sensing in an established concanavalin A–dextran affinity system using frequency‐domain lifetime spectroscopy. A dextran (MW 2000000) labeled with a small fluorescent donor molecule, Alexa Fluor 568, was used to competitively bind to a sugar‐binding protein, concanavalin A, labeled with acceptor molecule, Alexa Fluor 647, in the presence of glucose. The FRET‐quenching kinetics of the donor were analyzed from frequency‐domain measurements as a function of both glucose and acceptor‐protein concentrations using a Förster‐type decay kinetics model. The results show that the frequency‐domain measurements and donor decay kinetics can quantitatively indicate changes in the competitive binding of 0.09 μM dextran to labeled concanavalin A at a solution concentration of 10.67 μM in the presence of glucose at concentrations ranging from 0 to 224 mg/dL.     

Spectral regions selection to improve prediction ability of PLS models by changeable size moving window partial least squares and searching combination moving window partial least squares

Changeable size moving window partial least squares (CSMWPLS) and searching combination moving window partial least squares (SCMWPLS) are proposed to search for an optimized spectral interval and an optimized combination of spectral regions from informative regions obtained by a previously proposed spectral interval selection method, moving window partial least squares (MWPLSR) [Anal. Chem. 74 (2002) 3555]. The utilization of informative regions aims to construct better PLS models than those based on the whole spectral points. The purpose of CSMWPLS and SCMWPLS is to optimize the informative regions and their combination to further improve the prediction ability of the PLS models. The results of their application to an open-path (OP)/FT-IR spectra data set show that the proposed methods, especially SCMWPLS can find out an optimized combination, with which one can improve, often significantly, the performance of the corresponding PLS model, in terms of low prediction error, root mean square error of prediction (RMSEP) with the reasonable latent variable (LVs) number, comparing with the results obtained using whole spectra or direct combination of informative regions for a compound. Regions consisting of the combinations obtained can easily be explained by the existence of IR absorption bands in those spectral regions.     

Ab initio structure determination of new compound Ba3(BO3)(PO4)

The crystal structure of new compound Ba₃BPO₇ was determined by ab initio method from high-resolution conventional X-ray powder diffraction data. The Rietveld refinement converged to R_p=5.92%, R_wp=8.87%, R_exp=5.00% with the following details: Hexagonal, space group P6₃mc, a=5.4898 (1) Å, c=14.7551(1) Å, Z=2. The basic unit of the structure is the [BaO₁₀]-[BO₃]-[PO₄] polar polyhedra-chain composed of Ba1-B-P-O cluster. These chains, running along c-axis, stack in a HCP mode to build the whole structure with triangular prism channels. The channels are parallel to c-axis too, in which Ba2 and Ba3 are located.     

Syntheses and characterizations of three-dimensional channel-like polymeric lanthanide complexes constructed by 1,2,4,5-benzenetetracarboxylic acid

The hydrothermal reaction of YbCl(3) small middle dot6H(2)O with 1,2,4,5-benzenetetracarboxylic dianhydride resulted in [[Yb((b)btec)(1/4)((d)btec)(3/6)(H(2)O)(2)](4).6H(2)O](n)() (1) (H(4)btec = 1,2,4,5-benzenetetracarboxylic acid), and the solvothermal reaction of Er(NO(3))(3) small middle dot6H(2)O or TbCl(3).6H(2)O with 1,2,4,5-benzenetetracarboxylic dianhydride in H(2)O/acetic acid gave rise to [[Er(2)((c)btec)(2/4)((e)btec)(2/4)((f)btec)(2/4)(H(2)O)(4)].4H(2)O](n)() (2) and [[Tb(H(2)btec)(2/4)((f)btec)(3/6)(H(2)O)].2H(2)O](n)() (3), respectively. Complex 1 crystallizes in monoclinic space group C2/m with a = 20.8119(5) A, b = 17.6174(1) A, c = 5.7252(2) A, beta = 92.324(1) degrees, and Z = 1. 1 possesses a three-dimensional framework consisting of eight-coordinate ytterbium centers and two kinds of channels along the c axis. Complex 2 crystallizes in triclinic space group P with a = 9.6739(5) A, b = 11.0039(5) A, c = 11.5523 A, alpha = 104.8330(10) degrees, beta = 91.0000(10) degrees, gamma = 114.2570(10) degrees, and Z = 2. 2 has a three-dimensional framework comprising both eight- and nine-coordinate erbium centers and channels along the a axis. Complex 3 crystallizes in monoclinic space group P2(1)/n with a = 10.7246(12) A, b = 7.1693(9) A, c = 17.158(2) A, beta = 97.109(2) degrees, and Z = 4. 3 shows a three-dimensional framework containing nine-coordinate terbium centers and channels along the b axis. Uncoordinated water molecules occupy the channels in the three complexes. TGA and XRPD were determined for the three complexes, and the results illustrate that the framework of 1 is retained upon removal of uncoordinated and coordinated water molecules.     

A hybrid nonaqueous electrochemical supercapacitor using nano-sized iron oxyhydroxide and activated carbon

A beta-iron oxyhydroxide (FeOOH) was synthesized via a hydrolyzing route and investigated as a lithium intercalation host. It delivers a capacity of about 170 mAh/g and exhibits good cycling performance when charged/discharged in the voltage range from 1.6 V to 3.3 V. For the first time we have confirmed that FeOOH is suitable for using it as a negative electrode for hybrid electrochemical supercapacitor assembled with an activated carbon positive electrode in 1.0 M LiPF₆ ethylene carbonate/dimethyl carbonate (EC/DMC, 1:2 in volume) solution. The cell reveals a slightly sloping voltage profile from 0 V to 2.8 V and gives an estimated specific energy of 45 Wh/kg based on the total weight of two electrode materials, approximately two times of carbon/carbon electrochemical double layer capacitors. The hybrid supercapacitor shows a good cycling performance, it remains approximately 96% of initial capacity after 800 cycles at a charge/discharge rate of 4 C. The capacitor also shows a desirable rate capability, even at 10 C discharge rate, it holds 80% of capacity compared with that at 1 C discharge rate.     

Combining the best in triplex recognition: synthesis and nucleic acid binding of a BQQ-neomycin conjugate

Synthesis of a BQQ-neomycin conjugate is reported. The conjugate combines two ligands, one known to intercalate triplexes (BQQ) and another known to bind in the triplex groove (neomycin). The conjugate stabilizes T.A.T, as well as mixed base DNA triplex, better than neomycin, BQQ, or a combination of both. The conjugate selectively stabilizes the triplex (in the presence of physiological salt concentrations), with as little as 4 muM of the ligand leading to a DeltaTm of >60 degrees C. Competition dialysis studies show a clear preference for the drug binding to triplex DNA/RNA over the duplex/single strand structures. Modeling studies suggest a structure of neomycin bound to the larger W-H (Watson-Hoogsteen) groove with BQQ intercalated between the triplex bases.     

Comparison of the volatile constituents of Artemisia capillaris from different locations by gas chromatography-mass spectrometry and projection method

The volatile chemical constituents of Artemisia capillaries (an important traditional Chinese medicine) were determined by gas chromatography-mass spectrometry (GC-MS) and sub-window factor analysis (SFA). Seventy-five components were separated and 43 of them were qualitatively and quantitatively determined, which represented about 89.03% of the total content. This profile was then used to identify and assess the consistency of the herb by using an orthogonal projection method. Four different sources of A. capillaries were analyzed and compared with each other. Among the components determined, there were 51 components coexisting in all samples although the relative peak areas of a few showed variations. It is the first time to apply orthogonal projection method to the comparison of different samples, and it reduces the burden of qualitative analysis as well as the subjectivity. The results showed a fair consistency in their GC-MS fingerprint. A. capillaris was distinguished from Artemisia sacrorum L., a possible substitute in traditional Chinese medicine by comparing the fingerprints with each other.     

Synthesis of 7,9-dideoxybaccatin IV analogs from sinenxan A

Sinenxan A, a taxoid isolated from callus tissue cultures of Taxus yunnanensis was converted into 13-oxo-7,9-dideoxy-2-debenzoyl-2-acetyl-baccatin IV and 7,9-dideoxy-2-debenzoyl-4-deacetyl-baccatin IV, a key framework of 1,7,9-trideoxypaclitaxel. Several special steps in this transformation are worthy of note: (1) deoxygenation by treatment with hypophosphorous acid at C-14 position; (2) a highly regioselective O-deacetylation of taxanes at C-5 position; and (3) stereoselective reduction of the 13-carbonyl group by transannular assistance from the C-4-hydroxyl.     

On the photoreactivity of diacetylene containing thermoplastic block copolymers

A group of block copolymers containing diacetylenes as chain extenders in their hard segments was prepared, based on urethanes, esters, ureas, and amides as hard segments and polybutadienes, polyethers, polyesters, and polysiloxanes as soft segments. Almost all block copolymers were photoreactive, but there was a wide range of sensitivities. The photoreactivity of the copolymers was found to depend on the reactivity of the monomer unit, on the width of the diacetylene stacks in the hard segments, and on the degree of phase separation in the solid films. To explore the range of monomer reactivities we prepared 15 crystalline monomers. Urethanes were in general the most reactive, and this was attributed in part to the specific effect of hydrogen bonding which brings about a shortening of the C₁ to C₄ distance between diacetylenes tend to reduce the photoreactivity. The behavior of identical diacetylene units in the monomer crystal, in the homopolymer, and in the block copolymer is discussed in this paper.