一种电流引线的热力学计算方法

从超导磁体气冷电流引线的热平衡方程出发,对电流引线进行分段,提出了一种较为精确计算电流引线长横比及由电流引线末端流入低温容器热量的计算方法;电流引线中氦气流阻是设计电流引线时一个很重要的参数,由于电流引线片形状很复杂,计算其中氦气流阻比较好的方法是采用CFD软件Fluent。氦气模型单元数很庞大,因此对氦气模型进行了简化和分段,相邻两段模型间采用流量和压力边界条件进行耦合。     

The complex-mode vibration of ultrasonic vibration systems

The longitudinal-flexural and torsional-flexural vibrations are studied for the ultrasonic solid horn and the ultrasonic vibration system comprised of a sandwich transducer and a solid horn. The discussed solid horn is of arbitrary non-uniform cross-section. The analysis on flexural-mode vibration is based on Timoshenko theory. The theoretical results are verified by experiment.     

DFT Investigations of Aun Nano-Clusters Supported on TiO2 Nanotubes: Structures and Electronic Properties

TiO₂ nanotubes (TiO₂NTs) are beneficial for photogenerated electron separation in photocatalysis. In order to improve the utilization rate of TiO₂NTs in the visible light region, an effective method is to use Au_n cluster deposition-modified TiO₂NTs. It is of great significance to investigate the mechanism of Au_n clusters supported on TiO₂NTs to strengthen its visible-light response. In this work, the structures, electronic properties, Mulliken atomic charge, density of states, band structure, and deformation density of Au_n (n = 1, 8, 13) clusters supported on TiO₂NTs were investigated by DMOL3. Based on published research results, the most stable adsorption configurations of Au_n (n = 1, 8, 13) clusters supported with TiO₂NTs were obtained. The adsorption energy increased as the number of Au adatoms increased linearly. The Au_n clusters supported on TiO₂NTs carry a negative charge. The band gaps of the three most stable structures of each adsorption system decreased compared to TiO₂NTs; the valence top and the conduction bottom of the Fermi level come mainly from the contribution of 5d and 6s-Au. The electronic properties of the 5d and 6s impurity orbitals cause valence widening and band gap narrowing.     

Determination of protoapigenone in rat plasma by high‐performance liquid chromatography with UV detection and its application in pharmacokinetic studies

A simple and sensitive HPLC method using UV detection was developed to determine the concentration of protoapigenone in rat plasma. Chromatographic separation was conducted on a C₁₈ column with a mobile phase consisting of an acetonitrile–methanol–aqueous phase (containing 0.2% acetic acid, pH 3.0) system at a flow rate of 1.0 mL/min. The UV detector was set at 248 nm. The calibration curve was linear over the range of 0.031–10.0 µg/mL. The lower limit of quantification was 31 ng/mL. The recoveries for plasma samples ranged from 70.3 to 82.5%. The intra‐ and inter‐day accuracy and precision fulfilled the international standards. This method was successfully applied to a pharmacokinetic study of protoapigenone in rats after oral administration of protoapigenone. It was shown that protoapigenone could be absorbed rapidly after oral administration and could reach the maximum concentration within 1 h. Copyright © 2013 John Wiley & Sons, Ltd.     

A family of single‐isomer,dicationic cyclodextrin chiral selectors for capillary electrophoresis: Mono‐6A‐ammonium‐6C‐butylimidazolium‐β‐cyclodextrin chlorides

The first member of the single‐isomer, dicationic cyclodextrin (CD) family, 6^A‐ammonium‐6^C‐butylimidazolium‐β‐cyclodextrin chlorides (AMBIMCD), has been synthesized, analytically characterized, and used to separate a variety of acidic enantiomers and amino acids by CE. Starting from mono‐6^A‐azido‐β‐cyclodextrin, the cationic imidazolium and ammonium moieties were subsequently introduced onto primary ring of β‐cyclodextrin via nucleophilic addition and Staudinger reaction. The analytically pure AC regio‐isomer CD was further obtained via column chromatography. This dicationic CD exhibited excellent enantioselectivities for selected analytes at concentration as low as 0.5 mM, which were even better than those of its mono‐imidazolium or ammonium‐substitued counterpart CDs at 10 equivalent concentrations. The effective mobilities of all studied analytes were found to decrease with the concentration of AMBIMCD. Inclusion complexation in combination with eletrostatic interactions seemed to account for the enhanced chiral discrimination process.     

Characterization and Bioavailability of Vitamin C Nanoliposomes Prepared by Film Evaporation-Dynamic High Pressure Microfluidization

Vitamin C nanoliposomes were prepared by combining a conventional method (film evaporation) with dynamic high pressure microfluidization. Their physicochemical characterizations (antioxidant activity, particle size, entrapment efficiency, morphology, in vitro drug release, and storage stability) and skin permeation behavior were investigated. The results showed that vitamin C nanoliposomes, having equivalent DPPH (2, 2-diphenyl-1-picrylhydrazyl) free radical scavenging capacity of pure vitamin C solution without loss of their biological activity, exhibited better storage stability at 37°C for 24 hours and at 4°C for 60 days, a more excellent sustained drug release as well as higher skin penetration rate than vitamin C liposomes.     

Study on the flow resistance of the dispersion system of deformable preformed particle gel in porous media using LBM-DEM-IMB method

After being injected into the porous media, the dispersion system of preformed particle gel (PPG) tends to enter high permeability regions and block water channeling passages, which forces the subsequent water to turn to the low permeability regions and thus increases sweep efficiency and enhances oil recovery. However, it is still unclear about the influence factors and the mechanisms how PPG increases water flow resistance, which limits the application of PPG in more oilfields. Therefore, the paper combines the lattice Boltzmann method (LBM), the discrete element method (DEM) and the improved immersed moving boundary (IMB) method to simulate the migration of deformable PPG in porous media. On the basis, the paper quantitatively analyzes the variation law of displacement pressure across the porous media and discusses the influence factors such as the PPG diameter, elasticity modulus and the number concentration. Results indicate that, because of the friction and retention of PPG in pore-throat, the displacement pressure across the porous media during PPG flooding is much higher than that during water flooding. In other words, the existence of PPG increases the flow resistance of injected water. Besides, the displacement pressure is always fluctuant resulting from the continuous process of PPG migration, retention, deformation and remigration. Influence factor analysis shows that the incremental value and fluctuation degree of flow resistance increase with the PPG diameter, elasticity modulus and the number concentration. The study not only provides useful reference for future PPG flooding, but also benefits the development of deformable particle flow theory.     

The behavior of technetium in technetium-scrubbing stage of PUREX process

Technetium decontamination factor as a function of the acidity, flow ratio, scrubbing stage number was investigated by counter-current cascade experiments or mixer-settler batch tests. Results showed that the acidity of the scrubbing acid has little influence on the decontamination factor of technetium when the acidity was kept in the range of 4.5–6 M. The most effective method to increase the decontamination factor is to lower the feed-to-acid flow ratio. Keeping other condition same the factor increased to 10.3 from 3.1 when feed-to-acid ratio changed to 4 from 5.6. The loss of uranium and plutonium can be recovered through a re-extraction technology.     

Chiral and water‐soluble poly(2‐oxazoline)s

We describe the synthesis and characterization of the first water‐soluble and chiral poly(2,4‐disubstituted‐2‐oxazoline)s. While poly(2,4‐dimethyl‐2‐oxazoline)s are water soluble up to 100 °C, aqueous solutions of poly(2‐ethyl‐4‐methly‐2‐oxazoline) exhibit a lower critical solution temperature. This is discussed in context with its constitutional isomers poly(2‐oxazoline)s and poly(2‐oxazine)s. Circular dichroism spectroscopy revealed strong Cotton effects, which are also responsive to temperature in aqueous solution. It is therefore hypothesized that structures, comparable to polyproline helices, are formed in aqueous solution. In contrast to polyproline, poly(2,4‐disubstituted‐2‐oxazoline)s are highly water soluble and therefore represent very interesting pseudo‐polypeptides that may be useful to develop responsive biomimetic biomaterials. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013