Superferromagnetic state of α-Fe in Fe implanted Co6Ag94 studied by Mössbauer spectroscopy

After having introduced by ion implantation ⁵⁷Fe to a local concentration of 7 at% into Co₆Ag₉₄, we observed it by conversion electron Mössbauer spectroscopy in the as-prepared state and after isochronal annealing. A superferromagnetic state is inferred, which is correlated with the ordering of the magnetic moments on the Fe clusters through chain-like or dendritic Co/Fe linear structures. The magnetic moment disordering temperature lies above 473 K.     

复Finsler流形上的Koppelman-Leray-Norguet公式

利用不变积分核(Berndtsson核),复Finsler度量和联系于Chern-Finsler联络的非线性联络,研究复Finsler流形上具有逐块光滑C~((1))边界的有界域上(p,q)型微分形式的积分表示,得到了(p,q)型微分形式的Koppelman-Leray-Norguet公式和■-方程的解．作为应用,利用复Finsler度量和联系于Chern-Finsler联络的非线性联络,给出了Stein流形上具有逐块光滑C~((1))边界的有界域上(p,q)型微分形式的Koppelman- Leray-Norguet公式以及■-方程的解,并且得到了Stein流形上实非退化强拟凸多面体上(p,q)型微分形式的积分表示式和■-方程的解．     

Average Atom Model in Hot Plasmas

Ａｖｅｒａｇｅ　Ａｔｏｍ　Ｍｏｄｅｌ　ｉｎ　Ｈｏｔ　ＰｌａｓｍａｓＡｖｅｒａｇｅＡｔｏｍＭｏｄｅｌｉｎＨｏｔＰｌａｓｍａｓ￥ＹｕａｎＪｉａｎｈｕｉ；ＳｕｎＹｏｎｇｓｈｅｎｇ；ＺｈｅｎｇＳｈａｏｔａｎｇ（ＩｎｓｔｉｔｕｔｅｏｆＡｐｐｌｉｅｄＰｈｙｓｉｃ...     

Mössbauer studies on the hydrogenation and dehydrogenation of Nd16Fe76B8 magnet

Hydrogenation and dehydrogenation of the Nd₁₆Fe₇₆B₈ magnet are studied by X-ray diffraction analysis (XRD) and Mössbauer spectroscopy. The results of the samples treated under different hydrogen gas pressures at different temperatures are discussed. A special hydrogenation-dehydrogenation treatment of the Nd?Fe?B magnet cast can produce excellent isotropic magnet powders and the treated sample has passed a hydrogenation-disproportionation-recombination process.     

不同激发密度下CdS晶体的光致发光和受激发射

本文主要研究在77-111K温度范围内、不同激发密度的N2激光器的337.1nm谱线激发下,激子-激子(Ex-Ex)、激子-载流子(Ex-e)的相互作用和发射一个LO声子(Ex-1LO)、两个LO声子(Ex-2LO)的自由激子的辐射复合行为.并在77K温度下观测到由Ex-Ex发射产生的受激发射.     

四溴双酚A锑铝双金属化合物的合成及其阻燃性能

以四溴双酚Ａ（ＴＢＡ）合成了在水和空气中稳定的四溴双酚Ａ合锑铝双金属化合物（ＴＢＡＳＡ）．通过ＩＲ、１ＨＮＭＲ和元素分析予以表征，并研究了其对聚乙烯（ＰＥ）和聚环氧乙烷（ＰＥＯ）的阻燃性能．结果表明，这种分子中含有溴、锑和铝的化合物，对聚乙烯和聚环氧乙烷等高聚物材料有高的阻燃性能与消烟效果．     

Influence of preparation methods on structure and properties of PA6/PA66 blends: A comparison of melt‐mixing and in situ blending

The blends composed of polyamide 6 (PA6) and polyamide 66 (PA66) were obtained using two different preparation methods, one of which was the melt‐mixing through a twin‐screw extruder and the subsequent injection molding; and the other, the in situ blending through anionic polymerization of ε‐caprolactam in the presence of PA66. For the former, there existed a remarkable improvement in toughness but a drastic drop in strength and modulus; however, for the latter, a reverse but less significant trend of mechanical properties change appeared. Various characterizations were conducted, including the analyses of crystalline morphology, crystallographic form, and crystallization and melting behaviors using polarized optical microscopy (POM), wide‐angle X‐ray diffraction (WAXD), and differential scanning calorimetry (DSC), respectively; observation of morphology of fractured surface with scanning electron microscope (SEM); measurement of glass transition through dynamic mechanical analysis (DMA); and the intermolecular interaction as well as the interchange reaction between the two components by Fourier transform infrared spectrometry (FT‐IR) and ¹³C solution NMR. The presence and absence of interchange reaction was verified for the in situ and melt‐mixed blends, respectively. It is believed that the transreaction resulted in a drop in glass transition temperature (T_g) for the in situ blends, contrary to an increase of T_g with increasing PA66 content for the melt‐mixed ones. And the two kinds of fabrication methods led to significant differences in the crystallographic form, spherulite size and crystalline content and perfection as well. Accordingly, it is attempted to explain the reasons for the opposite trends of changes in the mechanical properties for these two blends. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 1176–1186, 2007     

热电材料研究进展

在介绍热电材料制冷工作原理，分析热电材料优值系数的基础上，介绍了300K以下热电材料的研究进展，分析了热电材料的制冷特点、现状和应用前景．     

等式与界约束非线性优化信赖域算法的全局收敛

§ 1　ＩｎｔｒｏｄｕｃｔｉｏｎＣｏｎｓｉｄｅｒｔｈｅｆｏｌｌｏｗｉｎｇｎｏｎｌｉｎｅａｒｏｐｔｉｍｉｚａｔｉｏｎｐｒｏｂｌｅｍ :ｍｉｎｉｍｉｚｅｆ(ｘ)ｓｕｂｊｅｃｔｔｏＣ(ｘ) =0 ,　ａ≤ｘ≤ｂ ,( 1 .1 )ｗｈｅｒｅｆ(ｘ) :Ｒｎ→Ｒ ,Ｃ(ｘ) =(ｃ1(ｘ) ,ｃ2 (ｘ) ,...,ｃｍ(ｘ) ) Ｔ:Ｒｎ→Ｒｍ ａｒｅｔｗｉｃｅｃｏｎｔｉｎｕｏｕｓｌｙｄｉｆｆｅｒｅｎｔｉａｂｌｅ,ｍ≤ｎ ,ａ ,ｂ∈Ｒｎ.Ｔｒｕｓｔｒｅｇｉｏｎａｌｇｏｒｉｔｈｍｓａｒｅｖｅｒｙｅｆｆｅｃｔｉｖｅｆｏｒｓｏｌｖｉｎｇｎｏｎｌｉｎｅａｒｏｐｔｉｍｉ…     

微纳米加工技术及其应用综述

材料与结构在微纳米尺度展现了许多不同于宏观尺度的新特征，纳米技术已经成为当前科学研究与工业开发的热门领域之一。微小型化依赖于微纳米尺度的功能结构与器件，实现功能结构微纳米化的基础是先进的微纳米加上技术，文章对微纳米加上技术做了一个综合的介绍，简要说明了微纳米加工技术与传统加工技术的区别，在微纳米加工技术的应用方面提出了一些合理选择加工技术的原则，并对当前微纳米加工技术面临的挑战和今后发展的趋势作了预测。