Advanced Li-Ion Batteries with High Rate,Stability, and Mass Loading Based on Graphene Ribbon Hybrid Networks

To optimize the cycle life and rate performance of lithium-ion batteries (LIBs), ultra-fine Fe₂O₃ nanowires with a diameter of approximately 2 nm uniformly anchored on a cross-linked graphene ribbon network are fabricated. The unique three-dimensional structure can effectively improve the electrical conductivity and facilitate ion diffusion, especially cross-plane diffusion. Moreover, Fe₂O₃ nanowires on graphene ribbons (Fe₂O₃/GR) are easily accessible for lithium ions compared with the traditional graphene sheets (Fe₂O₃/GS). In addition, the well-developed elastic network can not only undergo the drastic volume expansion during repetitive cycling, but also protect the bulk electrode from further pulverization. As a result, the Fe₂O₃/GR hybrid exhibits high rate and long cycle life Li storage performance (632 mAh g⁻¹ at 5 A g⁻¹, and 471 mAh g⁻¹ capacity maintained even after 3000 cycles). Especially at high mass loading (≈4 mg cm⁻²), the Fe₂O₃/GR can still deliver higher reversible capacity (223 mAh g⁻¹ even at 2 A g⁻¹) compared with the Fe₂O₃/GS (37 mAh g⁻¹) for LIBs.     

基于NiCo2O4纳米片电极的非对称混合电容器

The looming global energy crisis and ever-increasing energy demands have catalyzed the development of renewable energy storage systems. In this regard, supercapacitors (SCs) have attracted widespread attention because of their advantageous attributes such as high power density, excellent cycle stability, and environmental friendliness. However, SCs exhibit low energy density and it is important to optimize electrode materials to improve the overall performance of these devices. Among the various electrode materials available, spinel nickel cobaltate (NiCo₂O₄) is particularly interesting because of its excellent theoretical capacitance. Based on the understanding that the performances of the electrode materials strongly depend on their morphologies and structures, in this study, we successfully synthesized NiCo₂O₄ nanosheets on Ni foam via a simple hydrothermal route followed by calcination. The structures and morphologies of the as-synthesized products were characterized by X-ray diffraction, scanning electron microscopy, and Brunauer-Emmett-Teller (BET) surface area analysis, and the results showed that they were uniformly distributed on the Ni foam support. The surface chemical states of the elements in the samples were identified by X-ray photoelectron spectroscopy. The as-synthesized NiCo₂O₄ products were then tested as cathode materials for supercapacitors in a traditional three-electrode system. The electrochemical performances of the NiCo₂O₄ electrode materials were studied and the area capacitance was found to be 1.26 C·cm^-2 at a current density of 1 mA·cm^-2. Furthermore, outstanding cycling stability with 97.6% retention of the initial discharge capacitance after 10000 cycles and excellent rate performance (67.5% capacitance retention with the current density from 1 to 14 mA·cm^-2) were achieved. It was found that the Ni foam supporting the NiCo₂O₄ nanosheets increased the conductivity of the electrode materials. However, it is worth noting that the contribution of nickel foam to the areal capacitance of the electrode materials was almost zero during the charge and discharge processes. To further investigate the practical application of the as-synthesized NiCo₂O₄ nanosheets-based electrode, a device was assembled with the as-prepared samples as the positive electrode and active carbon (AC) as the negative electrode. The assembled supercapacitor showed energy densities of 0.14 and 0.09 Wh·cm^-3 at 1.56 and 4.5 W·cm^-3, respectively. Furthermore, it was able to maintain 95% of its initial specific capacitance after 10000 cycles. The excellent electrochemical performance of the NiCo₂O₄ nanosheets could be ascribed to their unique spatial structure composed of interconnected ultrathin nanosheets, which facilitated electron transportation and ion penetration, suggesting their potential applications as electrode materials for high performance supercapacitors. The present synthetic route can be extended to other ternary transition metal oxides/sulfides for future energy storage devices and systems.     

Copper-Catalyzed Enantioselective Allylic Alkylation with a γ-Butyrolactone-Derived Silyl Ketene Acetal

Herein, we report a Cu-catalyzed enantioselective allylic alkylation using a γ-butyrolactone-derived silyl ketene acetal. Critical to the development of this work was the identification of a novel mono-picolinamide ligand with the appropriate steric and electronic properties to afford the desired products in high yield (up to 96 %) and high ee (up to 95 %). Aryl, aliphatic, and unsubstituted allylic chlorides bearing a broad range of functionality are well-tolerated. Spectroscopic studies reveal that a Cu^I species is likely the active catalyst, and DFT calculations suggest ligand sterics play an important role in determining Cu coordination and thus catalyst geometry.     

Thermal Conversion of Methane to Formaldehyde Promoted by Gold in AuNbO3+ Cluster Cations

In addition to generation of a methyl radical, formation of a formaldehyde molecule was observed in the thermal reaction of methane with AuNbO₃⁺ heteronuclear oxide cluster cations. The clusters were prepared by laser ablation and mass‐selected to react with CH₄ in an ion‐trap reactor under thermal collision conditions. The reaction was studied by mass spectrometry and DFT calculations. The latter indicated that the gold atom promotes formaldehyde formation through transformation of an Au?O bond into an Au?Nb bond during the reaction.     

Crystallization,Mechanical and Flame-retardant Properties of Poly(lactic acid) Composites with DOPO and DOPO-POSS

Poly(lactic acid)(PLA) composites with 9,10-dihydro-9-oxa-10-phosphaphenanthrene-10-oxide(DOPO) and DOPOcontaining polyhedral oligomeric silsesquioxane(DOPO-POSS) were prepared via melting extrusion and injection molding. The crystallization, mechanical, and flame-retardant properties of PLA/DOPO and PLA/DOPO-POSS were investigated by differential scanning calorimetry(DSC), X-ray diffraction(XRD), tensile testing, thermogravimetric analysis(TGA), limiting oxygen index(LOI),and cone calorimeter test. The DSC results showed that the DOPO added could act as a plasticizer as reflected by lower glass transition temperature and inhibited crystallization of part of the PLA; the DOPO-POSS acted like a filler in the PLA matrix and slightly improved the crystallinity of the PLA matrix. The XRD and DSC analyses indicated that the PLA composites by cold molding injection were amorphous, and the PLA composites following a heat treatment in an oven at 120 °C for 30 min achieved crystallinity. All the PLA and its composites after heat treatment had improved mechanical properties. The thermogravimetric analysis(TGA) tests showed that the PLA,DOPO and DOPO-POSS decomposed separately in the PLA/DOPO and PLA/DOPO-POSS, respectively. The cone calorimeter tests offered clear evidence that addition of the DOPO-POSS resulted in an evident reduction of 25% for the peak of heat release rate(p-HRR).It was also confirmed that the crystalline flame-retardant PLA composites after heat treatment had better flame retardant properties than the amorphous PLA composites prepared by the cold molding.     

Bimetallic aluminum complexes supported by bis(salicylaldimine) ligand: Synthesis,characterization and ring-opening polymerization of lactide

Two types of bifunctional bis(salicylaldimine) ligands (syn-L and anti-L) were designed and synthesized to support bimetallic aluminum complexes.Owing to the rigid anthracene skeleton,syn-L and anti-L successfully locked two Al centers in close proximity (syn-Al2) and far apart (anti-Al2),respectively.The distance between two Al centers in syn-Al2 was defined by X-ray diffraction as 6.665 (A),which is far shorter than that in anti-Al2.In the presence of stoichiometrical BnOH,syn-Al2 and anti-Al2 were both efficient for ring-opening polymerization (ROP) of rac-LA with the former being more active.In the presence of excess BnOH,syn-Al2 showed an efficient and immortal feature,consistent with high conversions,matched Mns,narrow molecular weight distributions and end group fidelity,while anti-Al2 had a much lower activity or even became entirely inactive due to rapid decomposition,indicated by in situ 1H-NMR experiments of A1 complexes with BnOH.     

简便方法制备氮掺杂的碳球用作高效非金属氧还原催化剂（英文）

随着人们环保意识的不断增强,社会对清洁能源的需求也日益增加.燃料电池具有效率高,燃料来源丰富,可直接将化学能转化成电能且污染小等优点,因而受到了广泛关注.然而,燃料电池的阴极氧还原反应(ORR)速率较慢,成为提高燃料电池整体效率的制约因素.因此,开发高性能的ORR催化剂,加快ORR反应速率具有非常重要的意义.目前,Pt基催化剂被认为是活性最好的商用ORR电催化剂.尽管此类催化剂具有较高的催化活性和良好的稳定性,但Pt的储量有限,价格高昂,抗燃料毒化性能差,限制了其大规模应用.近年来,为了减小Pt的用量,降低催化剂成本,人们除了致力于研究贵金属合金催化剂及非贵金属催化剂外,还把目光聚焦在了非金属催化剂,特别是碳及其复合材料的研究上.在众多碳材料中,碳球因具有良好的表面渗透性和较高的机械稳定性而被广泛应用于催化、吸附、药物输送和能量存储及转化等领域中.然而,碳球的表面化学惰性较强,比表面积较低,使其部分应用受到了限制.因此,人们采用了多种方法来调控碳球的物理化学性质.其中,向碳材料中掺入杂原子,尤其是氮原子的方法广受青睐.因为杂原子的掺入会显著增强作为主体的碳原子给电子的能力和表面吸附性质,从而对ORR表现出优异的催化活性和稳定性.本文以蔗糖作为碳源,三聚氰胺作为氮源,采用水热法及高温热解法制备了一系列氮掺杂的生物质碳球.并对氮掺杂量及热解温度进行了优化.结果表明,石墨化程度及石墨氮含量的提高,能有效地提高催化剂的活性.在优化了的条件下得到的催化剂N0.1C1.9S-900,表现出了比商业Pt/C催化剂更好的ORR催化性能.在0.1 mol/L KOH中,该催化剂催化ORR的起始电位和半波电位分别为–22.6和–133.6 mV(vs.Ag/AgCl),极限电流密度为4.6 mA/cm~2,分别比商业Pt/C高出7.2 mV,5.9 mV和0.2 mA/cm~2.同时,在经过30000 s的稳定性测试中,N0.1C1.9S-900催化剂的电流损失也远低于Pt/C,表明该催化剂具有良好的稳定性.此外,在抗甲醇毒化实验中,相比于商业Pt/C,N0.1C1.9S-900催化剂对甲醇有更好的耐受性.另外,该催化剂催化的ORR属于高效的4e~–途径.可见,该催化剂作为燃料电池的阴极氧还原反应催化剂具有广阔的前景.     

Direct alkylation of thiophenes via bis-coupling with vinyl acetates

A novel direct alkylation of thiophenes via bis-coupling with vinyl acetates has been developed. To the best of our knowledge, this represents the first report of the iron-catalysed coupling of two thiophenes with vinyl groups. Utilizing earth-abundant, inexpensive, and non-toxic iron catalysts, this methodology converts simple thiophenes to symmetrical dithienylethane derivatives under mild conditions in one step.     

Four supramolecular transition metal(II) complexes based on triazole-benzoic acid derivatives: crystal structure,Hirshfeld surface analysis,and spectroscopic and thermal properties

Four new complexes [M(3-tba)₂(H₂O)₄] (1–3) and [Co(4-tba)₂(H₂O)₄] (4) {M = Zn (1), Ni (2), Co (3), 3-Htba = 3-(1H-1,2,4-triazol-1-yl)benzoic acid, 4-Htba = 4-(1H-1,2,4-triazol-1-yl)benzoic acid} have been synthesized under solvothermal conditions and structurally characterized by single crystal X-ray diffraction. Complexes 1–4 are also determined by elemental analysis, X-ray powder diffraction, IR and electronic spectroscopy. Single crystal X-ray diffraction reveals that complexes 1–3 are isostructural and they crystallize in the orthorhombic space group of Pbca, while complex 4 belongs to triclinic system with Pī space group. Based on different intermolecular hydrogen bonding and π···π stacking interactions, complexes 1–4 further assembled into 3D supramolecular frameworks. Hirshfeld surface analysis was used to further study the intermolecular interactions of the complexes. The thermogravimetric analyses (TGA) reveal that these complexes possess good thermal stability, and the differential scanning calorimetry (DSC) analyses show intense exothermic phenomena in the decomposition processes of triazole groups. Besides, the photoluminescence property of complex 1 in the solid state is also determined.     

A Multiresidue Method for Simultaneous Determination of 116 Pesticides in <Emphasis Type="Italic">Notoginseng Radix et Rhizoma</Emphasis> Using Modified QuEChERS Coupled with Gas Chromatography Tandem Mass Spectrometry and Census 180 Batches of Sample from Yunnan Province

A method was established for the simultaneous determination of 116 pesticide residues in Notoginseng Radix et Rhizome with a combination of the modified QuEChERS method and GC–MS/MS. The sample was extracted with acetonitrile, cleaned up by primary–secondary amine and octadecyl-modified silica (C18) sorbents and determined by GC–MS/MS in multireaction monitoring mode. Matrix-matched calibration coupled with internal standard method was applied to compensate for the matrix effect and to quantify the pesticides. The results of all the 116 pesticides showed good linearity in the respective linear range with correlation coefficients (r²) > 0.99. The method limits of quantification were between 0.01 and 0.05 mg kg^?1. The recoveries were between 64.3 and 119.4%, with RSD values typically lower than 18.3% at three spiked levels of 0.05, 0.10 and 0.20 mg kg^?1. The validated methodology is easy, fast, highly accurate, reliable and sensitive for monitoring and quantification of the 116 pesticide residues in Notoginseng Radix et Rhizoma. In 180 batches of real samples, 11 pesticides were detected and among these quintozene and cyfluthrin were in excess of the standard of European Union maximum residue level for herbs.