Nano-segregated polymeric film exhibiting high ionic conductivities

Nanostructures can be used for the fabrication of highly functional materials transporting ions and charges. We demonstrate a new design strategy for polymeric higher ion-conductors. Phase-segregated layers of alternating mobile tetra(ethylene oxide)s (TEOs) and rigid aromatic cores where the TEO moieties are grafted from aromatic layers have been shown to be efficient to transport lithium triflate. Such segregated structures at the nanometer scale (nano-segregated structures) were prepared by in-situ photopolymerization of an aligned methacrylate liquid crystalline monomer comprising a terphenyl rigid rod mesogen having a TEO terminal chain. The ion-conductive TEO moiety remains in the highly mobile state even after polymerization, which is indicated by its low glass transition temperature (-45 degrees C). This nanostructured film exhibits an ionic conductivity parallel to the layer of 10(-3) S cm(-1) at room temperature. The highest ionic conductivity is in the level of 10(-2) S cm(-1) observed at 150 degrees C. The anisotropic ionic conductivities have been observed for the nano-segregated film.     

Oenothein B in Eucalyptus Leaf Extract Suppresses Fructose Absorption in Caco-2 Cells

Inhibition of fructose absorption may suppress adiposity and adiposity-related diseases caused by fructose ingestion. Eucalyptus leaf extract (ELE) inhibits intestinal fructose absorption (but not glucose absorption); however, its active compound has not yet been identified. Therefore, we evaluated the inhibitory activity of ELE obtained from Eucalyptus globulus using an intestinal fructose permeation assay with the human intestinal epithelial cell line Caco-2. The luminal sides of a cell monolayer model cultured on membrane filters were exposed to fructose with or without the ELE. Cellular fructose permeation was evaluated by measuring the fructose concentration in the medium on the basolateral side. ELE inhibited 65% of fructose absorption at a final concentration of 1 mg/mL. Oenothein B isolated from the ELE strongly inhibited fructose absorption; the inhibition rate was 63% at a final concentration of 5 μg/mL. Oenothein B did not affect glucose absorption. In contrast, the other major constituents (i.e., gallic acid and ellagic acid) showed little fructose-inhibitory activity. To our knowledge, this is the first report that oenothein B in ELE strongly inhibits fructose absorption in vitro. ELE containing oenothein B can prevent and ameliorate obesity and other diseases caused by dietary fructose consumption.     

Ionic conductivity of complexes of novel multiarmed polymers with phosphazene core and LiClO4

Novel multiarmed polymers with ethylene oxide units, [( CH₂CH₂O)_n : 7, n = 3; 8, n= 7.2; 9, n = 11.8, and 12, n = 11.8] were prepared from the reaction of polyethylene glycol monomethyl ethers with acid chlorides of hexakis(3,5-dicarboxyphenoxy)-( 6 ) and hexakis(4-carboxyphenoxy)cyclotriphosphazenes ( 11 ) and conductivities of their Li⁺ salt complexes were investigated. The glass transition temperatures of the salt-free polymers are in the temperature range −59 to −54°C, indicative of a high degree of reorientational mobility of the arms. When LiClO₄ was added to the multiarmed polymers, the T_g values raised monotonically. The extent of T_g elevation was affected by the length of arms and the number of oxygen atoms around cyclotriphosphazene core and increased in the order 7 > 8 > 12 > 9 . The conductivities increased in the order 9 > 8 = 12 > 7 and the maximum conductivities of 4.0 × 10⁻⁵ S/cm at 30°C and 6.0 × 10⁻⁴ S/cm at 90°C have been achieved for the 9 -Li⁺ complex with Li⁺/O = 0.03. Interestingly, the conductivity of 9 -Li⁺ complexes at constant reduced temperatures increased in the whole concentrations of LiClO₄ examined (Li⁺/O = 0.01–0.2), although the degree of increase in conductivity above Li⁺/O = 0.06 became small. From the behaviors of T_g and the conductivity of multiarmed polymer–LiClO₄ complexes, it appears that the conductivity is governed by relative concentrations of inter- and intramolecular complexes in the polymer matrix. The influence of structural change of the comb-shaped to multiarmed polymers on the conductivity is described. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 1839–1847, 1997     

Human serum albumin incorporating synthetic hemes as an O2-carrying hemoprotein: control of O2-binding ability by heme structure

Incorporation of different structured synthetic hemes, 5,10,15,20-tetraphenylporphyrinatoiron(II) derivetives with a covalently linked proximal base [FeP( 1 ) to FeP( 7 )], into human serum albumin (HSA), provides seven types of albumin-heme hybrids (HSA-FeP) with different O₂-binding abilities. An HSA host absorbs a maximum of eight FeP molecules in each case. The obtained all HSA-FePs can reversibly bind and release O₂ under physiological conditions (in aqueous media, pH 7.3, 37°C) as similar as hemoglobin and myoglobin. The difference in the fence structures did not affect the O₂-binding parameters, however the axial histidine coordination significantly increased the O₂-binding affinity, which is ascribed to the low O₂-dissociation rate constants. The most remarkable effect of the heme structure appeared in the half-lifetime (τ_1/2) of the O₂-adduct complex. The dioxygenated rHSA-FeP( 4 ) showed an unusually long lifetime (τ_1/2: 25 hr at 37°C) which is ca. 13-fold longer than that of rHSA-FeP( 1 ).     

Synthesis of poly(ethynylplatinumporphyrin) and its application as an oxygen pressure-sensitive paint

5-(4-Trimethylsilyethynylphenyl)-10,15,20-triphenylplatinumporphyrin was synthesized and copolymerized with trimethylsilylpropyne to give a new high-molecular-weight porphyrin polymer. The polymer formed a smooth and tough coating on many types of surfaces. The coating showed a strong blue luminescence from the platinumporphyrin residue which was quenched in the presence of oxygen. The relationship of the luminescence intensity vs oxygen pressure displayed a remarkably high pressure sensitivity in the low oxygen pressure area, which was ascribed to the high oxygen permeability of the polymer.     

Inside Back Cover: Integrated Soft Porosity and Electrical Properties of Conductive-on-Insulating Metal-Organic Framework Nanocrystals (Angew. Chem. Int. Ed. 35/2023)

A one-stone, two-bird method to integrate the soft porosity and electrical properties of distinct metal–organic frameworks (MOFs) into a single material involves the design of conductive-on-insulating MOF (cMOF-on-iMOF) heterostructures that allow for direct electrical control. Herein, we report the synthesis of cMOF-on-iMOF heterostructures using a seeded layer-by-layer method, in which the sorptive iMOF core is combined with chemiresistive cMOF shells. The resulting cMOF-on-iMOF heterostructures exhibit enhanced selective sorption of CO₂ compared to the pristine iMOF (298 K, 1 bar, S from 15.4 of ZIF-7 to 43.2–152.8). This enhancement is attributed to the porous interface formed by the hybridization of both frameworks at the molecular level. Furthermore, owing to the flexible structure of the iMOF core, the cMOF-on-iMOF heterostructures with semiconductive soft porous interfaces demonstrated high flexibility in sensing and electrical “shape memory” toward acetone and CO₂. This behavior was observed through the guest-induced structural changes of the iMOF core, as revealed by the operando synchrotron grazing incidence wide-angle X-ray scattering measurements.