The rheology of suspensions of vinylon fibers in polymer liquids. II. Suspensions in polymer solutions

Summary The rheological properties of vinylon fiber suspensions in polymer solutions were studied in steady shear flow. Shear viscosity, first normal-stress difference, yield stress, relative viscosity, and other properties were discussed. Three kinds of flexible vinylon fibers of uniform length and three kinds of polymer solutions as mediums which exhibited remarkable non-Newtonian behaviors were employed. The shear viscosity and relative viscosity ( _r ) increased with the fiber content and the aspect ratio, and depended upon the shear rate. Shear rate dependence of _r was found only in the low shear rate region. This result was different from that of vinylon fiber suspensions in Newtonian fluids. The first normal-stress difference increased at first slightly with increasing fiber content but rather decreased and showed lower values for high content suspensions than that of the medium. A yield stress could be determined by using a modified equation of Casson type. The flow properties of the fiber suspensions depended on the viscosity of the medium in the suspensions under consideration.With 16 figures and 1 table     

An analysis of horizontal plane motion of tracked vehicles

This paper presents a theoretical analysis of non-stationary motion of a tracked vehicle on level ground. A practical model that includes track slippage, inertia force and the moment of inertia was developed to analyze and predict steering dynamics and steerability on the subject examined.

The system of differential equations was programmed and numerically solved on a digital computer, where the inputs are circumferential velocities of right and left drive sprockets.

The simulations for J-turn maneuver disclose the effects of initial forward velocities on the transient responses of the track slip velocity, side slip angle, yaw rate, and acceleration of the center of gravity of a tracked vehicle.     

Viscosity of particle filled polymer melts

Summary Viscosities of particle filled polymer melts were measured at fairly low shear rate. Particles were glass beads, glass balloons, and silas balloons. Polymers were polyethylene and polystyrene. Flow curves were superimposed with respect to concentration of filler. The relative viscosity defined as the ratio of viscosity of filled polymer to that of unfilled polymer at the same shear stress is obtained as an asymptotic value even for highly filled material. The relation between relative viscosity and volume fraction of filler was represented by the equations derived byMaron andPierce orMooney. Only the distribution of particle size had influence on relative viscosity at a defined filler concentration. Yield stresses were estimated, and found to increase exponentially in the range of volume fraction from 0.1 to 0.5.

---

Zusammenfassung Viskositäten von Polymerschmelzen, die mit Teilchen gefüllt worden waren, wurden bei mittleren Schergeschwindigkeiten bestimmt. Als Teilchen wurden Voll- und Hohlkugeln aus Glas, sowie sog. silas balloons, als Polymere Polyäthylen und Polystyrol verwendet. Die Fließkurven für verschiedene Füllstoffkonzentrationen wurden überlagert. Die relative Viskosität, definiert als das Verhältnis der Viskositäten von gefülltem und ungefülltem Polymer bei gleicher Schubspannung, besitzt einen asymptotischen Wert selbst für hoch gefülltes Material. Die Beziehung zwischen relativer Viskosität und Füllstoff-Volumenkonzentration läßt sich durch eine vonMaron undPierce oder eine vonMooney abgeleitete Gleichung beschreiben. Nur die Teilchengrößenverteilung hat bei einer definierten Füllstoffkonzentration einen Einfluß auf die relative Viskosität. Fließspannungen werden abgeschätzt und dafür in einem Konzentrationsbereich zwischen 0,1 und 0,5 ein exponentieller Anstieg gefunden.

---

---

With 13 figures and 2 tables     

Protein structure predictions by parallel simulated annealing molecular dynamics using genetic crossover

We propose a conformational search method to find a global minimum energy structure for protein systems. The simulated annealing is a powerful method for local conformational search. On the other hand, the genetic crossover can search the global conformational space. Our method incorporates these attractive features of the simulated annealing and genetic crossover. In the previous works, we have been using the Monte Carlo algorithm for simulated annealing. In the present work, we use the molecular dynamics algorithm instead. To examine the effectiveness of our method, we compared our results with those of the normal simulated annealing molecular dynamics simulations by using an α-helical miniprotein. We used genetic two-point crossover here. The conformations, which have lower energy than those obtained from the conventional simulated annealing, were obtained.     

Anti-biofouling properties of an amphoteric polymer brush constructed on a glass substrate

An amphoteric copolymer brush of methacrylic acid (MA) and 2-(dimethylamino)ethyl methacrylate (DMAEMA) was prepared by reversible addition-fragmentation chain-transfer (RAFT) polymerization using both a free chain transfer agent (n-butylsulfanylthiocarbonylsulfanyl-2-methyl propionic acid) and a radical initiator (4,4'-azobis(4-cyanopentanoic acid)) covalently fixed to a glass substrate. An aqueous solution of the copolymer, Poly(MA-r-DMAEMA), which was simultaneously obtained in liquid phase, had a sufficiently small polydispersity in its molecular weight. The copolymer brush showed effective suppression of non-specific adsorption of bovine serum albumin and egg white lysozyme to the brush. In contrast, both negatively charged PolyMA and positively charged PolyDMAEMA brushes significantly adsorbed the proteins irrespective of their net charges. Upon ion beam irradiation, furthermore, a hollow space with a designed shape could be made on the glass substrate, and both HEK293 and HepG2 cells non-specifically adhered to the space, forming aggregates, while no adhesion to the non-treated area on the brush was observed. These results suggest that the amphoteric polymer brushes will be useful materials for biomedical applications.     

Redox-controlled, reversible rearrangement of a tris(2-pyridylthio)methyl ligand on nickel to an isomer with an “N,S-confused” 2-pyridylthiolate arm

Interchange between the nickel +2 and +3 oxidation states precisely controls the reversible rearrangement of the tris(2-pyridylthio)methanide (tptm) ligand in the organometallic nickel(II) complex [{Ni(μ-Br)-(tptm)}(2)] (2). Oxidation of 2 first gives the corresponding Ni(III) complex [{Ni(μ-Br)(tptm)}(2)][PF(6)](2) (4). However, in solution the tptm ligand in 4 slowly undergoes a rearrangement, in which the N and S atoms of one of the pyridylthiolate arms exchange Ni and C bonding partners, thereby resulting in an "N,S-confused" isomer of tptm in the product, [NiBr(bpttpm)]PF(6) (5; bpttpm= bis(2-pyridylthio)(2-thiopyridinium)-methyl). Reduction of 5 reverses this ligand rearrangement and 2 is reformed quantitatively. The individual steps involved in these unusual ligand rearrangements were investigated by a number of methods, including voltammetric analysis, and a mechanism for this process is proposed. X-ray crystal structure determinations of the key compounds 2, 4 and 5 have been obtained.     

Nb2O5·nH2O as a heterogeneous catalyst with water-tolerant Lewis acid sites

Niobic acid, Nb(2)O(5)·nH(2)O, has been studied as a heterogeneous Lewis acid catalyst. NbO(4) tetrahedra, Lewis acid sites, on Nb(2)O(5)·nH(2)O surface immediately form NbO(4)-H(2)O adducts in the presence of water. However, a part of the adducts can still function as effective Lewis acid sites, catalyzing the allylation of benzaldehyde with tetraallyl tin and the conversion of glucose into 5-(hydroxymethyl)furfural in water.     

Efficient direct electron transfer with enzyme on a nanostructured carbon film fabricated with a maskless top-down UV/ozone process

We have developed a new carbon film electrode material with thornlike surface nanostructures to realize efficient direct electron transfer (DET) with enzymes, which is very important for various enzyme biosensors and for anodes or cathodes used in biofuel cells. The nanostructures were fabricated using UV/ozone treatment without a mask, and the obtained nanostructures were typically 2-3.5 nm high as confirmed by atomic force microscopy measurements. X-ray photoelectron spectroscopy and transmission electron microscopy revealed that these nanostructures could be formed by employing significantly different etching rates depending on nanometer-order differences in the local sp(3) content of the nanocarbon film, which we fabricated with the electron cyclotron resonance sputtering method. These structures could not be realized using other carbon films such as boron-doped diamond, glassy carbon, pyrolyzed polymers based on spin-coated polyimide or vacuum-deposited phthalocyanine films, or diamond-like carbon films because those carbon films have relatively homogeneous structures or micrometer-order crystalline structures. With physically adsorbed bilirubin oxidase on the nanostructured carbon surface, the DET catalytic current amplification was 30 times greater than that obtained with the original carbon film with a flat surface. This efficient DET of an enzyme could not be achieved by changing the hydrophilicity of the flat carbon surface, suggesting that DET was accelerated by the formation of nanostructures with a hydrophilic surface. Efficient DET was also observed using cytochrome c.     

Proton transport properties of poly(aspartic acid) with different average molecular weights

We synthesized seven partially protonated poly(aspartic acids)/sodium polyaspartates (P-Asp) with different average molecular weights to study their proton transport properties. The number-average degree of polymerization (DP) for each P-Asp was 30 (P-Asp30), 115 (P-Asp115), 140 (P-Asp140), 160 (P-Asp160), 185 (P-Asp185), 205 (P-Asp205), and 250 (P-Asp250). The proton conductivity depended on the number-average DP. The maximum and minimum proton conductivities under a relative humidity of 70% and 298 K were 1.7 · 10^?3 S cm^?1 (P-Asp140) and 4.6 · 10^?4 S cm^?1 (P-Asp250), respectively. Differential thermogravimetric analysis (TG-DTA) was carried out for each P-Asp. The results were classified into two categories. One exhibited two endothermic peaks between t = (270 and 300) °C, the other exhibited only one peak. The P-Asp group with two endothermic peaks exhibited high proton conductivity. The high proton conductivity is related to the stability of the polymer. The number-average molecular weight also contributed to the stability of the polymer.     

The synthetic and biological studies of discorhabdins and related compounds

Various analogues of the marine alkaloids, discorhabdins, have been synthesized. The strategy contains spirocyclization with phenyliodine(III) bis(trifluoroacetate) (PIFA), oxidative fragmentation of the β-amino alcohols with the hypervalent iodine reagent C(6)F(5)I(OCOCF(3))(2), the detosylation and dehydrogenation reaction of the pyrroloiminoquinone unit in the presence of a catalytic amount of NaN(3) and the bridged ether synthesis with HBr-AcOH as the key reactions. All the synthesized compounds were evaluated by in vitro MTT assay for cytotoxic activity against the human colon cancer cell line HCT-116. Furthermore, the discorhabdin A oxa analogues were also evaluated against four kinds of tumor model cells, a human colon cancer cell line (WiDr), a human prostate cancer cell line (DU-145) and murine leukemia cell lines (P388 and L1210). For the identification of the target, discorhabdin A and the discorhabdin A oxa analogue were evaluated by an HCC panel assay. In the test, discorhabdins could have a novel mode of action with the tumor cells.