Facilitated sulfate transfer across the nitrobenzene-water interface as mediated by hydrogen-bonding ionophores.

Facilitated SO4(2-) transfers by hydrogen bond-forming ionophores are investigated across the nitrobenzene (NB)-water interface by using polarography with a dropping electrolyte electrode. Bis-thiourea 1, alpha,alpha'-bis(N'-p-nitrophenylthioureylene)-m-xylene, is found to significantly facilitate the transfer of the highly hydrophilic SO4(2-) whereas its counterpart, N-(p-nitrophenyl)-N'-propylthiourea (ionophore 2), cannot. In contrast to the predominant formation of a 1:1 complex with SO4(2-) in the bulk NB phase, the SO4(2-) transfer assisted by 1 is indeed based on the formation of a 1:2 complex between SO4(2-) and ionophore, even under the condition of [SO4(2-)]aq > [1]org. Such an exclusive formation of the 1:2 (SO4(2-) to ionophore) complex at the NB-water interface is not observed with structurally similar bis-thiourea 3, alpha,alpha'-bis(N'-phenylthioureylene)-m-xylene, where p-nitrophenyl moietes of bis-thiourea 1 are simply replaced by phenyl groups. The facilitated transfer of SO4(2-) with bis-thiourea 1 is further compared to that of HPO4(2-) and H2PO4- across the NB-water interface, which was previously shown to be assisted by 1 through the formation of the 1:1 and 2:1 (anion to ionophore) complexes, respectively. On the basis of these examinations, unique binding behaviors of hydrogen bond-forming ionophores at the NB-water interface are discussed, with a view towards development of ionophore-based anion-selective chemical sensors.     

Hetergeneous-nucleation synthesis of monodisperse ε-cobalt nanoparticles using palladium seeds

Monodisperse bimetallic Pd–Co nanoparticles were prepared via a thermal decomposition of cobalt carbonyl using palladium seeds at the Pd/Co molar ratios 0.5%, 1%, and 5%. The heterogeneously nucleated nanoparticles without any size-selective precipitation are sufficiently uniform to self-assemble into ordered arrays. The as-synthesized nanoparticles are each a single crystal with a complex cubic structure called ε-Co. The presence of Pd seeds seems to improve the stability of Co nanoparticles against oxidation based on the results from time-dependent magnetization measurement.     

Electronic effect on the regioselectivity in the ring opening of para-substituted phenyloxiranes by acetylides

The electronic effect on the regioselectivity in the alkynylation of phenyloxiranes was investigated using three kinds of metal acetylides. BF₃ mediated lithium acetylide provided either the α- or β-alkynylated products by controlling the effect of the para-substituents of the phenyloxiranes. LiClO₄ mediated lithium acetylide and titanium acetylide, on the other hand, afforded predominantly the β- and α-products, respectively.     

In Situ Processing of Nano Crystalline Oxide Particles/Polymer Hybrid

Nano sized crystalline particles/polymer hybrids were synthesized form designed metal-organic precursors. The newly developed method is composed of the synthesis of organic matrix by polymerization and the in situ nucleation and growth of crystalline oxide particles in the organic matrix below 100°C. The design of metal-organic precursor modified with polymerizable ligand and the selection of reaction conditions does influence the size and crystallinity of ceramic particles in organic matrix. The nano-sized magnetic particle/polymer hybrid exhibits the interesting feature of superparamagnetism and quantum size effect. The crystalline particles of BaTiO₃/, PbTiO₃/, and KNbO₃/polymer hybrids behave to be dielectric and show the typical electro-rheological behavior.     

Diastereoselective synthesis of the 19-epi-C18-C25 segment of (−)-lasonolide A and an unusual inversion at C19

Diastereoselective construction of the 19-epi-C₁₈-C₂₅ segment of (−)-lasonolide A was achieved using a 5-exo-trigonal mode of radical cyclization for the creation of the contiguous quaternary and tertiary stereogenic centers at C₂₂ and C₂₃ as the key reaction step. During the dehydration stage, it was found that an unusual inversion of configuration took place.     

A large thermal hysteresis loop produced by a charge-transfer phase transition in a rubidium manganese hexacyanoferrate

In a rubidium manganese hexacyanoferrate, RbMn[Fe(CN)(6)], the magnetic susceptibility (chi(M)) decreased at 225 K (=T(1/2)decreasing) and abruptly increased at 300 K (=T(1/2)increasing) in the cooling and warming processes, respectively. X-ray photoelectron spectroscopy and infrared spectroscopy indicated that the high-temperature (HT) and low-temperature (LT) phases were composed of Mn(II)-NC-Fe(III) and Mn(III)-NC-Fe(II), respectively. A structural change from cubic (F43m, a = 10.533 A) to tetragonal (I4m2, a = b = 7.090 A, c = 10.520 A) accompanied the phase transition, and, on the basis of these results, the HT and LT phases were assigned to Mn(II)(t(2g)(3)e(g)(2), (6)A(1g); S = (5)/(2))-NC-Fe(III) (t(2g)(5), (2)T(2g); S = (1)/(2)) and Mn(III)(e(g)(2)b(2g)(1)a(1g)(1), (5)B(1g); S = 2)-NC-Fe(II) (b(2g)(2)e(g)(4), (1)A(1g); S = 0), respectively. This phenomenon is caused by a metal-to-metal charge transfer from Mn(II) to Fe(III) and a Jahn-Teller distortion of the produced Mn(III) ion. The reaction mechanism is discussed, considering the entropy difference between the HT and LT phases.     

Polymerization of acrylamide initiated with pinacol–ceric ion redox system

Polymerization of acrylamide initiated with a pinacol–ceric ion redox system was investigated. The polymer obtained was found to contain one cerium atom in a polymer molecule. It was considered that the cerium atom was introduced into the polymer molecule by the termination reaction as there is no cerium atom in the initiating radical in the present system. A similar termination reaction was attained by ferric ion but not by cerous ion. The metal ion was considered to terminate the polymerization to form a stable polymer. Some considerations on the structure of the reaction product relating to the polymerization mechanism were discussed.     

Correlation between the structure of water in the vicinity of carboxybetaine polymers and their blood-compatibility

The structure and hydrogen bonding of water in the vicinity of carboxybetaine homopolymer (poly[1-carboxy-N,N-dimethyl-N-(2'-methacryloyloxyethyl)methanaminium inner salt] (PolyCMB), and a random copolymer of CMB and n-butyl methacrylate, Poly(CMB-r-BMA), with various molecular weights were analyzed in their aqueous solutions and thin film with contours of O-H stretching of Raman and attenuated total reflection infrared (ATR-IR) spectra, respectively. The relative intensity of the collective band (C value) corresponding to a long-range coupling of O-H stretchings of the Raman spectra for aqueous solution of Poly(CMB-r-BMA) was very close to that for pure water, which is in contrast with the smaller C value in aqueous solution of ordinary polyelectrolytes. The number of hydrogen bonds collapsed by the presence of one monomer residue (N(corr) value) of PolyCMB and Poly(CMB-r-BMA) (CMB, 45 mol %) (M(w), 1.14 x 10(4) and 1.78 x 10(4), respectively) could be calculated from the C value. The N(corr) values were much smaller than those for ordinary polyelectrolytes and close to those for nonionic water-soluble polymers such as poly(ethylene glycol) and poly(N-vinylpyrrolidone). Furthermore, a water-insoluble Poly(CMB-r-BMA) with a large BMA content (M(w) = 347 kD, CMB 27 mol %) could be cast as a thin film (thickness, ca. 10 microm) on a ZnSe crystal for the ATR-IR analyses. At an early stage of sorption of water into the Poly(CMB-r-BMA) film, the O-H stretching band of IR spectra for the water incorporated in the film was similar to that for free water, which is in contrast with the drastic change in the O-H stretching band of water incorporated in polymer films such as poly(methyl methacrylate) (PMMA) and poly(n-butyl methacrylate) (PBMA). The theoretical vibrational frequency for water molecules hydrating a betaine molecule calculated by using a density functional method supported the experimental results. The adhesion of human platelets to Poly(CMB-r-BMA) films was much less than that to PMMA and PBMA. With an increase in the content of CMB residue, the number of platelets adhered to the Poly(CMB-r-BMA) film drastically decreased and then gradually increased, probably due to the increase in the roughness of the film surface. These results suggest that the carboxybetaine monomer residues with a zwitterionic structure do not significantly disturb the hydrogen bonding between water molecules in both aqueous solution and thin film systems, resulting in the excellent blood-compatibility of the carboxybetaine polymers.