Highly phosphonated poly(N‐phenylacrylamide) for proton exchange membranes

A novel highly phosphonated poly(N‐phenylacrylamide) ( PDPAA ) with an ion‐exchange capacity (IEC) of 6.72 mequiv/g was synthesized by the radical polymerization of N‐[2,4‐bis(diethoxyphosphinoyl)phenyl]acrylamide ( DEPAA ), followed by the hydrolysis with trimethylsilyl bromide. Then, the crosslinked PDPAA membrane was successfully prepared by the electrophilic substitution reaction between the aromatic rings of PDPAA and the carbocation formed from hexamethoxymethylmelamine (CYMEL) as a crosslinker in the presence of methanesulfonic acid. The crosslinked PDPAA membrane had high oxidative stability against Fenton's reagent at room temperature. The proton conductivity of the crosslinked PDPAA membrane was 8.8 × 10^?2 S/cm at 95% relative humidity (RH) and 80 °C, which was comparable to Nafion 112. Under low RH, the crosslinked PDPAA membrane showed the proton conductivity of 1.9 × 10^?3 and 4.7 × 10^?5 S/cm at 50 and 30% RH, respectively. The proton conductivity of the crosslinked PDPAA membrane lied in the highest class among the reported phosphonated polymers, and, consequently, the very high local concentration of the acids of PDPAA (IEC = 6.72 mequiv/g) achieved high and effective proton conduction under high RH. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Finite‐field method with unbiased polarizable continuum model for evaluation of the second hyperpolarizability of an open‐shell singlet molecule in solvents

The static second hyperpolarizability γ of the complexes composed of open‐shell singlet 1,3‐dipole molecule involving a boron atom and a water molecule in aqueous phase are investigated by the finite‐field (FF) method combined with a standard polarized continuum model (PCM) and with a newly proposed unbiased PCM (UBPCM). On the basis of the comparison with the results calculated by the FF method using the full quantum and the quantum‐mechanical/molecular‐mechanical and molecular‐dynamics (QM/MM‐MD) treatments, the present FF‐UBPCM method is demonstrated to remedy the artificial overestimation of the γ caused by standard FF‐PCM calculations and to well reproduce the FF‐QM/MM‐MD and FF‐full‐QM results with much lower costs. © 2013 Wiley Periodicals, Inc.     

Low molecular weight aromatic compounds possessing nonflammable and flammable characteristics in calcium fluoride nanocomposite matrices after calcination at 800 °C

Calcium chloride reacted with potassium fluoride in the presence of low molecular weight aromatic compounds (ArH) such as bisphenol AF, bisphenol A, bisphenol F, biphenyl, and 1-(2-naphthyl)ethanol under alkaline conditions to afford new calcium fluoride/ArH composites. Dynamic light scattering and field emission scanning electron micrographs measurements show that these calcium fluoride/ArH composites are nanometer size-controlled fine particles and have a good dispersibility and stability in water, tetrahydrofuran, 1,2-dichloroethane, methanol, dimethyl sulfoxide, N,N-dimethylformamide, and 2-propanol. Interestingly, aromatic compounds possessing acidic hydroxyl groups in the calcium fluoride nanocomposites were found to exhibit a nonflammable characteristic even after calcination at 800 °C, although the corresponding aromatic compounds possessing neither acidic hydroxyl groups nor hydroxyl groups in the nanocomposites exhibited a usual flammable characteristic under similar conditions. In contrast, calcium fluoride/ArH nanocomposites, which were prepared under no catalytic conditions, afforded a clear weight loss corresponding to the contents of ArH in the composites to exhibit a usual flammable characteristic.

Synthesis, structure, and conformational mobility of a vaulted trans-bis(o-aminophenolato)platinum(II) complex

The synthesis, structure, and conformational mobility of a trans-bis(aminophenolato)platinum(II) complex bearing a dodecamethylene bridge, [Pt(L)] (1) [H ₂ L = N,N′-Dimethyl-N,N′-bis(2-hydroxyphenylmethyl)dodecane-1,12-diamine] are described. The 2D NMR and X-ray diffraction analysis revealed that the complex has a “reversed U”-shaped syn conformation in the solution state, which is mainly due to steric congestion of the vaulted structure and hydrogen bonding at the bis[(o-aminomethyl)phenolato] coordination site, while the complex unit is packed in the crystalline state with “Z-shaped” anti-conformation due to highly regulated molecular arrangement by 3D CH-π and hydrogen bonding interactions.     

Role‐Allocated Combination of Two Types of Hydrogen Bonds towards Constructing a Breathing Diamondoid Porous Organic Salt

A diamondoid porous organic salt (d‐POS) composed of 8‐hydroxyquinoline‐5‐sulfonic acid (HQS) and triphenylmethylamine (TPMA) shows reversible structure contraction and expansion (“breathing”) in response to guest desorption and adsorption. This flexible structure is designed hierarchically by utilizing two different types of hydrogen bonds. X‐ray crystallographic analysis reveals that the two types of hydrogen bonds are formed separately to play respective roles for constructing the d‐POS. The strong charge‐assisted hydrogen bond between the sulfonate anion of HQS and the ammonium cation of TPMA serves as a static node to provide a supramolecular cluster for a building block. In contrast, the complementary neutral hydrogen bond between the hydroxyl and quinolyl groups of HQS acts as a dynamic linker to connect the clusters. Consequently, these two types of hydrogen bonds yield the d‐POS with one‐dimensional channels through the formation of diamondoid networks. We clarify that the d‐POS undergoes dynamic structure transformation that originates in the cleavage and reformation of the complementary neutral hydrogen bond during guest desorption and adsorption. From the comparative studies, it is also demonstrated that applying the complementary neutral hydrogen bond in the d‐POS provides significant advantages in terms of the responsivity of the structure over applying other weak noncovalent interactions for the connection of the clusters. Furthermore, the resultant d‐POS also modulates fluorescent profiles dynamically responsive to guest adsorption and desorption.     

Preparation and properties of fluorinated carboxylic acid/silica nanocomposite-encapsulated low molecular weight compounds

Perfluoro-2-methyl-3-oxahexanoic acid/silica nanocomposites [R_F-CO₂H/SiO₂] were prepared by the sol–gel reaction of tetraethoxysilane in the presence of silica nanoparticles and the corresponding fluorinated carboxylic acid under alkaline conditions. R_F-CO₂H/SiO₂ nanocomposites were found to exhibit no weight loss in proportion to the contents of fluorinated carboxylic acid in the composites even after calcination at 800 °C. The modified glass surface treated with the R_F-CO₂H/SiO₂ nanocomposites was shown to give a good oleophobicity with superhydrophilicity imparted by fluorinated carboxylic acid in the composites. R_F-CO₂H/SiO₂ nanocomposites were also applied to the encapsulation of a variety of low molecular weight aromatic and aliphatic compounds such as bisphenol AF [BPAF], bisphenol A [BPA], 4,4′-biphenol [BPOH], octafluoro-4,4′-biphenol [FBPOH], 4,4′-bis(triethoxysilyl)-1,1′-biphenyl [BTSBP], 3-(trihydroxysilyl)propane-1-sulfonic acid [THSP], α-cyclodextrin (α-CD), β-cyclodextrin (β-CD), and γ-cyclodextrin (γ-CD). Encapsulated aromatic compounds possessing acidic hydroxyl groups such as BPAF, BPA, and FBPOH in the R_F-COOH/SiO₂ nanocomposites were found to exhibit no weight loss corresponding to the contents of aromatic compounds in the composites even after calcination at 800 °C. On the other hand, encapsulated aromatic compounds possessing no acidic hydroxyl groups such as BTSBP and aliphatic compounds (THSP, α-, β-, and γ-CD) gave a clear weight loss corresponding to the contents of these compounds in the composites after calcination. In addition, the fluorinated silica nanocomposite-encapsulated these compounds were applied to the surface modification of glass to exhibit a good oleophobicity with superhydrophilicity imparted by fluorinated carboxylic acid on the surface.

Stoichiometric photoisomerization of mononuclear ruthenium(II) monoaquo complexes controlling redox properties and water oxidation catalysis

Although various reactions involved in photoexcited states of polypyridyl ruthenium(II) complexes have been extensively studied, photoisomerization of the complexes is very rare. We report the first illustration of stoichiometric photoisomerization of trans-[Ru(tpy)(pynp)OH(2)](2+) (1a) [tpy = 2,2':6',2'-terpyridine; pynp = 2-(2-pyridyl)-1,8-naphthyridine] to cis-[Ru(tpy)(pynp)OH(2)](2+) (1a') and the isolation of 1a and 1a' for X-ray crystallographic analysis. Polypyridyl ruthenium(II) aquo complexes are attracting much attention related to proton-coupled electron transfer and water oxidation catalysis. We demonstrate that the photoisomerization significantly controls the redox reactions and water oxidation catalyses involving the ruthenium(II) aquo complexes 1a and 1a'.     

pH‐Triggered Self‐Assembly of Cellulose Oligomers with Gelatin into a Double‐Network Hydrogel

Multicomponent systems for self‐assembled molecular gels provide huge opportunities to generate collective or new functions that are not inherent in individual single‐component gels. However, gelation tends to require careful and complicated procedures, because, among a myriad of kinetically trapped structures related to the degree of mixing of multiple components over a wide range of scales, from molecular level to macroscopic scale, a limited number of structures that exhibit the desired function need to be constructed. This study presents a simple method for the construction of double‐network (DN) hydrogels with improved stiffness composed of crystalline cellulose oligomers and gelatin. The pH‐triggered self‐assembly of cellulose oligomers leads to the formation of robust networks composed of crystalline nanofibers in the presence of dissolved gelatin, followed by cooling to allow for the formation of soft gelatin networks. The resultant DN hydrogels exhibit improved stiffness; the improvement in gel stiffness with double networking is comparable to that of previously reported DN hydrogels produced via a time‐consuming enzymatic reaction.     

Tetraspanin CD9 modulates ADAM17-mediated shedding of LR11 in leukocytes

LR11, also known as SorLA or SORL1, is a type-I membrane protein from which a large extracellular part, soluble LR11 (sLR11), is released by proteolytic shedding on cleavage with a disintegrin and metalloproteinase 17 (ADAM17). A shedding mechanism is presumed to have a key role in the functions of LR11, but the evidence for this has not yet been demonstrated. Tetraspanin CD9 has been recently shown to regulate the ADAM17-mediated shedding of tumor necrosis factor-α and intercellular adhesion molecule-1 on the cell surface. Here, we investigated the role of CD9 on the shedding of LR11 in leukocytes. LR11 was not expressed in THP-1 monocytes, but it was expressed and released in phorbol 12-myristate 13-acetate (PMA)-induced THP-1 macrophages (PMA/THP-1). Confocal microscopy showed colocalization of LR11 and CD9 proteins on the cell surface of PMA/THP-1. Ectopic neo-expression of CD9 in CCRF-SB cells, which are LR11-positive and CD9-negative, reduced the amount of sLR11 released from the cells. In contrast, incubation of LR11-transfected THP-1 cells with neutralizing anti-CD9 monoclonal antibodies increased the amount of sLR11 released from the cells. Likewise, the PMA-stimulated release of sLR11 increased in THP-1 cells transfected with CD9-targeted shRNAs, which was negated by treatment with the metalloproteinase inhibitor GM6001. These results suggest that the tetraspanin CD9 modulates the ADAM17-mediated shedding of LR11 in various leukemia cell lines and that the association between LR11 and CD9 on the cell surface has an important role in the ADAM17-mediated shedding mechanism.