Synthesis of directly linked zinc(II) porphyrin-imide dyads and energy gap dependence of intramolecular electron transfer reactions

A series of zinc(II) porphyrin-imide dyads (ZP-Im), in which an electron donating ZP moiety is directly connected to an electron accepting imide moiety in the meso position, have been prepared for the examination of energy gap dependence of intramolecular electron transfer reactions with large electronic coupling. The nearly perpendicular conformation of the imide moiety towards the porphyrin plane has been revealed by Xray crystal structures. The energy gap for charge separation, 1ZP* - Im --> ZP+ - Im-, is varied by changing the electron accepting imide moiety to cover a range of about 0.8 eV in DMF. Definitive evidence for electron transfer has been obtained in three solvents (toluene, THF, and DMF) through picosecond-femtosecond transient absorption studies, which have allowed us to determine the rates of photoinduced charge separation, 1ZP* - Im --> ZP+ - Im-, and subsequent thermal charge recombination ZP+ - Im- --> ZP - Im. The free-energy gap dependence (energy gap law) has been probed from the normal to the nearly top region for the charge separation rate alone, and only the inverted region for the charge recombination rate. Although both of the energy gap dependencies can be approximately reproduced by means of the simplified semiclassical equation, when we take into consideration the effect of the high frequency vibrations replaced by one mode of averaged frequency, many features, including the effects of solvent polarity and the electron tunneling matrix element on the energy gap law, differ considerably from those of the previously studied porphyrin-quinone systems, which have weaker interchromophore electronic interactions.     

A Novel Uranyl Complex with Dimeric Lacunary Polyoxoanion: [(A-α-SiW<Subscript>9</Subscript>O<Subscript>33</Subscript>)<Subscript>2</Subscript>K{UO<Subscript>2</Subscript>(H<Subscript>2</Subscript>O)}<Subscript>2</Subscript>]<Superscript>11−</Superscript>

A novel uranyl complex with dimeric lacunary polyoxoanion like open-mouthed clam, Na₅[(A-α-SiW₉O₃₃H₃)₂K{UO₂(H₂O)}₂], was prepared and characterized by elemental analysis, infrared and ultraviolet–visible spectroscopy and single crystal X-ray diffraction. In the anion, two A-α-SiW₉O₃₄¹⁰⁻ groups share two terminal oxygen atoms O_d′ derived from removal of three corner-shared W atoms from saturated α-Keggin anion, forming a dimeric anion with an open mouth in which potassium ion and uranyl ions are coordinated. Uranium atom adopts a pentagonal bipyramidal geometry. The coordinating anions are linked by sodium ions via coordination of terminal or bridging oxygen atoms, forming two-dimensional layer arrangement. Between the layers are the hydrogen bonds from which a supramolecular architecture is created. UV–VIS spectrum gives W–O and U–O charge transfer transitions at 230–265 and 432 nm, showing the change of geometry of the polyanion and weakening of the U–O bonds of the uranyl cation. Electronic supplementary material The online version of this article () contains supplementary material, which is available to authorized users.     

Study of a fluorescence quenching mechanism of enoxacin and its determination in human serum and urine samples

The maximum emission wavelength of dopamine is 317 nm with excitation at 290 nm. The relative fluorescence intensity of dopamine decreased in the presence of enoxacin, which showed that fluorescence quenching occurred. The Stern-Volmer (S-V) plot showed a nonlinear relationship between the relative fluorescence intensity of dopamine and the concentration of enoxain. The quenching mechanism was studied and the results suggested that both dynamic and static quenching processes were responsible for the observed positive deviation in the S-V plot. When the S-V plot was modified by logarithm, the linear relationship was obtained between logF ₀/F and C in the range of 0.10 to 13.0 μg/mL (where F ₀ is the relative fluorescence intensity of dopamine, F is the relative fluorescence intensity of dopamine in the presence of enoxacin, and C is the concentration of enoxacin). The fluorescence quenching method for the determination of enoxacin was developed. The linear regression equation of the calibration graph of enoxacin was C = 13.70 (logF ₀/F) − 0.5836, with the correlation coefficient 0.9984. The detection limit was 2.0 ng/mL and the relative standard deviation was 2.52%. The effects of pH, the stability of dopamine in the presence of enoxacin, and foreign ions on the determination of enoxacin have been examined. The recovery of enoxacin was from 94.9 to 103.0% in a human serum sample and from 94.9 to 108.0% in a urine sample. The method is simple, rapid, and can be used for the determination of enoxacin in human serum and urine samples with satisfactory results. The text was submitted by the authors in English.     

High-temperature thermal behaviour of Cr-Doped LiMn<Subscript>2</Subscript>O<Subscript>4</Subscript> spinels synthesized by the sucrose-aided combustion method

Chromium doped spinels LiCr_YMn_2−YO₄ (0.2≤Y≤0.8) has been synthesized by the sucrose-aided combustion procedure. The thermal behaviour, phase homogeneity and structural characteristics of the samples were studied by thermal analysis, coupled mass spectrometry, and room-and high-temperature X-ray diffraction methods. It was found that the ‘as prepared’ samples contained residual organic impurities undetectable for X-ray diffraction, that burn out completely at 400°C. Samples treated between 400 and 750°C are single phase spinels, whose crystallites size increase from 10 to 50 nm on increasing the temperature. Cr-doping enhances the thermal stability of the spinels, which augments on increasing the Cr content Y. The enhanced thermal stability of the spinels has been accounted for based on the high excess stabilization energy of Cr³⁺ in octahedral ligand field.     

Theoretical analysis of the performance of a model supercapacitor consisting of metal oxide nano-particles

The factors influencing the electrochemical behaviour of a supercapacitor have been partly examined in this work. The effects of so-called intrinsic parameters, i.e. exchange current density, unit cell length and double layer (DL) capacitance; as well as the so-called application parameters, i.e. cell current, on the cell potential discharge time have been considered. The contributions of each type of capacitors, DL capacitor and faradaic supercapacitor under various states of operation and material have been analyzed, and the competing (compensating) effects of the two types of capacitors as regards to the discharge and power characteristics manifested by current–potential and energy–power (Ragone plots) are elucidated.     

Capillary electrophoresis with wavelength-resolved laser-induced fluorescence detection

Capillary electrophoresis (CE) enables rapid separations with high separation efficiency and compatibility with small sample volumes. Laser-induced fluorescence detection can result in extremely low limits of detection in CE. Single-channel fluorescence detection, however, furnishes little qualitative information about a species being detected, except for its CE migration time. Use of multidimensional information often enables unambiguous identification of analytes. Combination of CE with information-rich wavelength-resolved fluorescence detection is analogous with ultraviolet-visible diode-array detection and furnishes both qualitative and quantitative chemical information about target species. This review discusses recent advances in wavelength-resolved laser-induced fluorescence detection coupled with CE, with an emphasis on instrument design.     

Preparation and characterization of nitrogen-doped titanium dioxides

A type of high visible-light active titanium oxinitride(TiO2-xNx) powder was prepared by a simple proc-ess:the calcination of the hydrated titanium dioxide at the atmosphere of ammonia-argon using a tu-bular electric furnace at high temperatures. The hydrated titanium dioxide was synthesized as the precursor of TiO2-xNx using titanic acid as raw material,which came from sulfate technique of produc-ing titanium white. The effects of temperature and reaction time on the nitrogen content,grain size and crystal structure were studied. The visible-light activity and photocatalysis capability of the powder were also investigated.     

Nitrosation of Phenolic Compounds: Effects of Alkyl Substituents and Solvent

Summary.  Nitrosation reactions of phenol, o-cresol, 2,6-dimethylphenol, o-tert-butylphenol, 2-hydroxyacetophenone, and 2-allylphenol in water and water/acetonitrile were studied. Kinetic monitoring of the reactions was accomplished by spectrophotometric analysis of the nitrosated products at 345 nm. The dominant reaction was C-nitrosation via a mechanism consisting of an attack on the nitrosatable substrate by NO⁺/NO₂H₂ ⁺ followed by a slow proton transfer. The values of the rate constants of phenolic C-nitrosation were increased by electron donating substituents, and a good Hammett correlation was observed with ρ = −6.1. The results also revealed the strong effect of pH and the permitivity of the reaction medium on the rate constant, whose maximum values were observed for pH ≈ 3, decreasing strongly for higher pH values. The study in water/acetonitrile with up to 25% acetonitrile showed that it is possible to inhibit the reaction strongly by increasing the percentage of the organic component. The conclusions drawn show that (i) it is possible to predict the rate of nitrosation of phenolics as a function of the meta-substituents on the phenol ring and (ii) the nitrosation of phenolics can be strongly inhibited by increasing the pH of the reaction medium as well as by lowering its dielectric constant. Received July 13, 2001. Accepted (revised) September 18, 2001     

Preparation and characterization of Co(II), Ni(II) and Cu(II) complexes of a ligand containing 1,3,4-thiadiazole groups

(1R,2R)-1,2-bis-(5-amino-1,3,4-thiadiazole-2-yl)ethane-1,2-diol (L) has been prepared by the reaction of thiosemicarbazide with (2R,3R)-(+)-tartaric acid (I) and phosphorous oxychloride, and its complexes with Co(II), Ni(II) and Cu(II) have been obtained. The structures of the ligand and its complexes have been established by i. r., ¹H- and ¹³C-n.m.r. spectra, u.v.–vis–nir spectroscopy, elemental analyses, T.g.-D.t.a. and magnetic susceptibility measurements.