A multi-mode-driven molecular shuttle: photochemically and thermally reactive azobenzene rotaxanes

The shuttling process of alpha-CyD in three rotaxanes (1-3) containing alpha-cyclodextrin (alpha-CyD) as a ring, azobenzene as a photoactive group, viologen as an energy barrier for slipping of the ring, and 2,4-dinitrobenzene as a stopper was investigated. The trans-cis photoisomerization of 1 by UV light irradiation occurred in both DMSO and water due to the movement of alpha-CyD toward the ethylene group, while the photoisomerization of 2 occurred in DMSO, but not in water. No photoisomerization was observed for 3 in both water and DMSO. The activation parameters of 1 and 1-ref in DMSO are subject to a compensation relation between deltaS(double dagger) and deltaH(double dagger); however, in water, the deltaS(double dagger) terms are not compensated by the deltaH(double dagger) terms. Alternating irradiation of the UV and visible lights resulted in a reversible change in the induced circular dichroism (ICD) bands of trans-1 and cis-1. In contrast, after the UV light irradiation, the ICD band of trans-2 decreased without the appearance of any bands of cis-2. The NMR spectra of 2 in DMSO showed coalescence of the split signals for the methylene and for the viologen protons due to the shuttling of alpha-CyD. Both the NOE differential spectra for cis-1 in water after UV light irradiation and 2 in DMSO after heating to 120 degrees C showed the negative NOE peaks assigned to interior protons of alpha-CyD, suggesting that alpha-CyD in cis-1 exists at the one ethylene moiety, and alpha-CyDs in cis-2 and 2 heated in DMSO exist at the propylene moieties.     

Catalyst design of hydrotalcite compounds for efficient oxidations

Various Mg-Al type hydrotalcites were examined as catalysts for the epoxidation of olefins and N-oxidation of pyridines using hydrogen peroxide. The catalytic activity of hydrotalcites increased with increasing the basicity of their surface. Adding cationic surfactants, e.g., n-dodecyltrimethylammonium bromide, to the above system remarkably accelerated the reaction rate. The hydrotalcites, into which were introduced both Ru and Co cations in the Brucite layers, were found to be good catalysts for the oxidation of various alcohols in the presence of molecular oxygen. Moreover, these hydrotalcites could smoothly catalyze also the oxygenation of diphenylmethane, fluorene, and xanthene at benzylic position with excellent yields. The hydrotalcite catalysts could be easily separated from the reaction mixture and reused with retention of their high catalytic performance for the above oxidations.     

Effect of molecular weight distribution on the structure and mechanical properties of ultradrawn,ultrahigh-molecular-weight polyethylene cast from solution. II. Drawability and mechanical properties

The effect of molecular weight distribution (MWD) on the ultradrawability and mechanical properties of solution-cast films of ultrahigh-molecular-weight polyethylene (UHMW-PE) has been investigated using tensile and dynamic mechanical measurements. The MWD has a marked effect on ultradrawability and thus on the ultimate mechanical properties such as the tensile modulus. It is proposed that UHMW-PE with a narrow MWD(N-PE) attains the ultimate structure at a lower draw ratio than UHMW-PE with a broad MWD(B-PE) because of the existence in the latter of less fully extended intercrystalline tie chains. It is found that, at the same drawing temperature (100°C), N-PE shows a higher modulus than B-PE at draw ratios up to 150 x, which is assumed to be the ultimate value for N-PE.     

Ionic conduction in CuxAg1−xBrTe solid solutions

The ionic conduction of cation substituted CuBrTe, Cu_xAg_1−xBrTe solid solutions, is investigated in the temperature range between 100 and 400 K. The change of electrical conductivities with temperature in the range of 0.94≤x<1 shows the characteristics of second-order rather than first-order phase transitions. The replacement of Cu with the Ag cation in Cu_xAg_1−xBrTe leads to an increase in conductivity especially in the β and γ-phases.     

Direct electron transfer with glucose oxidase immobilized in an electropolymerized poly( N-methylpyrrole) film on a gold microelectrode

Direct electron transfer between active glucose oxidase (GOD) and a gold electrode was obtained when GOD was immobilized in poly(N-methylpyrrole) electrochemically prepared on the gold electrode. When electropolymerization was accomplished at 50 °C, after glucose addition, the cyclic voltammograms showed an increased oxidation peak at ca. ?0.45 V vs. Ag/AgCl. This potential corresponds to the oxidation potential for FADH₂. Although the GOD becomes much less selective, a glucose-dependent current response is obtained.     

Degradation of hydroxymaleimide in 2-propanol by irradiation of energetic heavy ions (II)—N2-saturated system

Hydroxymaleimide was irradiated in N₂-saturated 2-propanol solutions by high-energy heavy ions over a wide range of LET values. The differential G-values of the degradation of hydroxymaleimide by irradiation with the heavier ions were lower than those of the lighter ions for the same LET value. An opposite result obtained in the air-saturated system. The degradation efficiency was 1.5 times higher, when the dose rate was 1/10 times lower. When irradiated at an LET value lower than 8 eV/nm, the G-values converged to a value less than that obtained by γ-irradiation.     

Enhanced JC in air-processed GdBa2Cu3O7−δ superconductor bulk grown by the additions of nano-particles

Single domain superconductor GdBa₂Cu₃O_7?δ bulks with variable additions of (ZnO + ZrO₂ + SnO₂) nano-particles was prepared in air by using top seed melt-textured growth process. The effect of nano-particle additions on superconductivity properties has been investigated. An enhancement of the critical current J_C in low and intermediate field at 77 K and trapped field was discovered by the additions of the nano-particles. At the same time, the superconductor transition temperature, T_C, slightly decreases from 93.5 K to 91.5 K. The experimental results show that the accumulation of the nano-particle inclusions may improve J_C of the specimens.     

Investigation of void formation beneath thin AlN layers by decomposition of sapphire substrates for self-separation of thick AlN layers grown by HVPE

Void formation at the interface between thick AlN layers and (0 0 0 1) sapphire substrates was investigated to form a predefined separation point of the thick AlN layers for the preparation of freestanding AlN substrates by hydride vapor phase epitaxy (HVPE). By heating 50–200 nm thick intermediate AlN layers above 1400 °C in a gas flow containing H₂ and NH₃, voids were formed beneath the AlN layers by the decomposition reaction of sapphire with hydrogen diffusing to the interface. The volume of the sapphire decomposed at the interface increased as the temperature and time of the heat treatment was increased and as the thickness of the AlN layer decreased. Thick AlN layers subsequently grown at 1450 °C after the formation of voids beneath the intermediate AlN layer with a thickness of 100 nm or above self-separated from the sapphire substrates during post-growth cooling with the aid of voids. The 79 μm thick freestanding AlN substrate obtained using a 200 nm thick intermediate AlN layer had a flat surface with no pits, high optical transparency at wavelengths above 208.1 nm, and a dislocation density of 1.5×10⁸ cm⁻².