Unique thermal behavior of acrylic PSAs bearing long alkyl side groups and crosslinked by aluminum chelate

An acrylic pressure-sensitive adhesive (PSA), bearing octadecyl acrylate, methyl acrylate and acrylic acid groups, and crosslinked by aluminum acetylacetonate (AlACA), displayed behavior unique among acrylic PSAs in that its adhesion, which decreases with an increase in temperature, began to increase again from around 150 °C. In order to understand this behavior, the structure and thermal properties of the PSA were investigated in detail, along with another PSA crosslinked by a covalent crosslinking agent (Az). From thermal mechanical analysis, the PSA with ionic crosslinks (AlACA) showed three softening points at 20, 60, and 160 °C. In comparison, the PSA covalently crosslinked by Az only exhibited two softening points (at 20 and 60 °C). The softening point at 160 °C is clearly related to ionic chelate crosslinking. DSC measurements indicated that the softening point at 20 °C resulted from melting of the ordered octadecyl group, and the softening point at 60 °C was due to an increase in the mobility of the main chain. The temperature dependence of viscoelastic measurements revealed that the viscosity of the PSA crosslinked by AlACA increased at around 160 °C. From these results, we considered that the distinctive adhesion of the PSA crosslinked by AlACA could be due to ligand exchange at the aluminum crosslinking points, which are chelated by carboxy groups built in the main chain.     

Synthesis and properties of new crystalline poly(arylene ether nitriles)

Crystalline poly(arylene ether nitrile) could be prepared by the polycondensation of 2,6-dihalobenzonitrile with resorcinol at 200°C in N-methylpyrrolidone in the presence of sodium carbonate. A reaction temperature of at least 200°C was necessary to attain high molecular weight polymer. Spectral data indicated that the polymer had the structure of a poly(meta-phenylene ether) with pendent nitrile groups on every other phenylene unit. Despite this structure, the crystallinity and the crystallization rate of the polymer were greater than those of the corresponding polymer with a para-linked structure. The glass transition temperature and the melting temperature of the polymer were almost the same as those of poly(etheretherketone) (PEEK^TM). A series of other new poly(arylene ether nitriles) were also examined. The polymers derived from 4,4′-biphenol, dihydroxytetra-phenylmethane, dihydroxydiphenylsulfone, and 1,5-isoquinolinediol had high glass transition temperatures. The poly(arylene ether nitriles) exhibited excellent tensile strength compared with the corresponding ketone- or sulfone-containing polymers. Comparing the three different kinds of polymers containing the same bisphenol units, the order of glass transition temperature was found to be sulfone- > nitrile- > ketone-containing polymers, while the order of tensile strength was nitrile- > ketone- > sulfone-containing polymers. The excellent mechanical properties are attributable to dipole-dipole interactions of nitrile groups. © 1993 John Wiley & Sons, Inc.     

Fe K‐Edge X‐ray Absorption Fine Structure Determination of γ‐Al2O3‐Supported Iron‐Oxide Species

The structure of FeO_x species supported on γ‐Al₂O₃ was investigated by using Fe K‐edge X‐ray absorption fine structure (XAFS) and X‐ray diffraction (XRD) measurements. The samples were prepared through the impregnation of iron nitrate on Al₂O₃ and co‐gelation of aluminum and iron sulfates. The dependence of the XRD patterns on Fe loading revealed the formation of α‐Fe₂O₃ particles at an Fe loading of above 10 wt %, whereas the formation of iron‐oxide crystals was not observed at Fe loadings of less than 9.0 wt %. The Fe K‐edge XAFS was characterized by a clear pre‐edge peak, which indicated that the Fe?O coordination structure deviates from central symmetry and that the degree of Fe?O?Fe bond formation is significantly lower than that in bulk samples at low Fe loading (<9.0 wt %). Fe K‐edge extended XAFS oscillations of the samples with low Fe loadings were explained by assuming an isolated iron‐oxide monomer on the γ‐Al₂O₃ surface.     

One‐Pot Synthesis of 2,5‐Dihydropyrroles from Terminal Alkynes,Azides, and Propargylic Alcohols by Relay Actions of Copper,Rhodium, and Gold

Relay actions of copper, rhodium, and gold formulate a one‐pot multistep pathway, which directly gives 2,5‐dihydropyrroles starting from terminal alkynes, sulfonyl azides, and propargylic alcohols. Initially, copper‐catalyzed 1,3‐dipolar cycloaddition of terminal alkynes with sulfonyl azides affords 1‐sulfonyl‐1,2,3‐triazoles, which then react with propargylic alcohols under the catalysis of rhodium. The resulting alkenyl propargyl ethers subsequently undergo the thermal Claisen rearrangement to give α‐allenyl‐α‐amino ketones. Finally, a gold catalyst prompts 5‐endo cyclization to produce 2,5‐dihydropyrroles.     

Specific crystal structure of poly(3-hydroxybutyrate) thin films studied by infrared reflection–absorption spectroscopy

Infrared reflection–absorption (IR-RAS) and transmission spectra were measured for poly(3-hydroxybutyrate) (PHB) thin films to explore its specific crystal structure in the surface region. As IR-RAS is sensitive to the vibration mode of perpendicular orientation of the surface, differences between IR-RAS and transmission spectra indicate an orientation of the lamella structure in the surface of PHB thin films. The relative intensity of the crystalline CO stretching band in the IR-RAS spectrum is significantly weaker than that in the transmission spectrum. It may be concluded that the transient dipole moment of the CO stretching mode of the crystalline state is not oriented perpendicular but nearly parallel to the substrate surface. On the other hand, the relative intensity of the band at 3009 cm⁻¹ due to the C–H stretching mode of the C–HOC hydrogen bonding is similar between the IR-RAS and transmission spectra, suggesting that the C–H bond is oriented neither perpendicular nor parallel to the substrate surface but in an intermediate direction. Since the CO group of the C–HOC hydrogen bonding is oriented nearly parallel to the surface and its C–H group is in the intermediate direction, it is very likely that the C–HOC hydrogen bonding has a somewhat bent structure. These results are in good agreement with our previous conclusion that the C–HOC hydrogen bonding of PHB exists along the a-axis (not the b-axis) between the CH₃ group of one helix and the CO group of another helix.     

Total synthesis of (+/-)-hedychenone: trimethyldecalin terpene systems via stepwise allenoate diene cycloaddition

The total synthesis of hedychenone 1 is described. The cycloaddition of the hindered diene 2 and the allenecarboxylate 3 has been shown conclusively to proceed via the [2+2] cycloadduct 5 to give a 2:1 mixture of the desired formal Diels-Alder adducts, the exo and endo isomers 4xn and is thus a stepwise [4+2] cycloaddition. The exo isomer 4x was converted in four steps (reduction, oxidation, olefination, and desilylation) into hedychenone 1. [reaction: see text]     

Improvement of TiO2/Dye/Electrolyte Interface Conditions by Positional Change of Alkyl Chains in Modified Panchromatic Ru Complex Dyes

A series of panchromatic ruthenium sensitizers ( MJ sensitizers) with attached thiophene and phenyl units bearing alkyl chains was synthesized. A new synthetic route was used to examine all possible positions for the alkyl chains. The absorption spectra showed the sum of a ruthenium complex and peripheral organic chromophore units. The hypochromic effect and blueshift of the metal‐to‐ligand charge‐transfer band observed in the modified ruthenium sensitizers were suppressed by changing the positions of the alkyl chains on the attached thiophene ring. Changing only one alkyl chain also influenced the performance of dye‐sensitized solar cells. Ruthenium sensitizer MJ‐10 with bulky substituent harvests visible and near‐infrared light, and solar cells sensitized by MJ‐10 exhibit an efficiency of 9.1 % under 1 sun irradiation.     

Novel synthesis of zerumbone-pendant derivatives and their biological activity

Zerumbone 1, having powerful latent reactivity and containing two conjugated double bonds and a double conjugated carbonyl group is the major component of the essential oil of wild ginger, Zingiber zerumbet Smith. The conjugation system plays an important role in the expression of biological activity. N-Bromosuccinimide (NBS) reaction of 1 gave high reactive intermediate 2 with an exo-methylene group, which was obtained from 1 quantitatively. Treatment of 2 with nucleophiles gave various zerumbone-pendant derivatives, including C–H, C–O, C–N, and C–C bond formation, maintaining the conjugation system through S_N2′-type reaction. Almost all zerumbone-pendant derivatives showed a good value of IC₅₀ against the suppressive effect of NO generation. Among them, amine derivative 5, binding with 2 mol of zerumbone, showed the strongest activity (IC₅₀: 0.24 μM).     

The Mukaiyama Aldol Reaction: 40 Years of Continuous Development

A directed cross‐aldol reaction of silyl enol ethers with carbonyl compounds, such as aldehydes and ketones, promoted by a Lewis acid, a reaction which is now widely known as the Mukaiyama aldol reaction. It was first reported in 1973, and this year marks the 40th anniversary. The directed cross‐aldol reactions mediated by boron enolates and tin(II) enolates also emerged from the Mukaiyama laboratory. These directed cross‐aldol reactions have become invaluable tools for the construction of stereochemically complex molecules from two carbonyl compounds. This Minireview provides a succinct historical overview of their discoveries and the early stages of their development.