Oxidation activity of Au nanoparticles on aerogel supports

We have prepared titania aerogel and titania-coated silica aerogel incorporating thiol-capped Au nanoparticles. Both composite materials showed high CO oxidation activity after they were calcined at 673 K. Compositional and morphological changes driven by calcination were evaluated with thermogravimetry and X-ray diffractometry. From the results, it was suggested that the nanoparticles transformed from a faulted to a near-regular FCC structure presumably in concert with the formation of firm contacts between the nanoparticles and the gel substrates. While the diameters of the Au particles in the titania aerogel considerably increased upon calcination, those in the titania-coated silica aerogel were almost unchanged. As a consequence, the latter composite aerogel showed higher activity for oxidation of CO.     

New asymmetric vanadium catalyst for highly selective oxidative coupling polymerization

Novel oxovanadium(IV)–bisoxazoline catalysts, such as vanadyl sulfate (VOSO₄)–(R)‐2,2′‐isopropylidenebis(4‐phenyl‐2‐oxazoline) [(R)Phbox], for the asymmetric oxidative coupling polymerization (AOCP) of 2,3‐dihydroxynaphthalene were developed. For example, the AOCP with VOSO₄–(R)Phbox in CH₂Cl₂–MeOH [7/1 (v/v)] at room temperature for 24 h under an O₂ atmosphere, followed by acetylation of the hydroxyl groups, afforded a polymer in a 58% yield with a specific rotation of [α]_D = ?147. The enantioselectivity during the polymerization was estimated to be 80% enantiomeric excess (S), a value much higher than that observed for the polymerizations with the copper(I)‐based catalyst systems and the typical oxovanadium(IV) catalysts reported for the asymmetric oxidative coupling producing the 1,1′‐bi‐2‐naphthol derivatives. © 2005 Wiley Periodicals, Inc., Inc. J Polym Sci Part A: Polym Chem 43: 5872–5878, 2005     

Biased and Unbiased Two-sided Wilcoxon Tests for Equal Sample Sizes

This paper answers the long-standing question of whether the two-sided Wilcoxon rank test for equal sample sizes is unbiased against a location parameter family of distributions by giving a counterexample. It is also shown that the nonrandomized two-sided Wilcoxon test for equal sample sizes with the least positive significance level is unbiased.     

Surfactant gel adsorption of platinum(II), (IV) and palladium(II) as chloro-complexes and kinetic separation of palladium from platinum using EDTA.

A micellar solution of cetylpyridinium chloride (CPC) can separate into two phases due to a temperature change or to the addition of salts. Platinum(II), (IV) and palladium(II) reacted with chloride ions to form stable anionic complexes of PtCl4(2-), PtCl6(2-) and PdCl4(2-), respectively, and were adsorbed onto the CPC gel phase. The CPC phase plays the role of an ion-exchange adsorbent for the anionic complexes. By such a procedure, the precious metals of platinum and palladium could be separated from base metals such as copper, zinc and iron. The kinetic separation was performed by a ligand exchange reaction of the palladium(II) chloro-complex with EDTA at 60 degrees C. The anionic palladium(II)-EDTA complex could not bind the opposite charged CP+ and was desorbed from the CPC phase. In the aqueous phase, the recovery of palladium(II) by the double-desorption was 101.1 +/- 1.2%. The platinum(II) and (IV) chloro-complexes were stable for at least 30 min and remained in the CPC phase.     

Application of microdialysis for study of caffeine distribution into brain and cerebrospinal fluid in rats.

The usefulness of microdialysis was examined for the chronological determination of caffeine concentration in the brain and cerebrospinal fluids (CSF) following intravenous administration of caffeine in rats. The recovery percent of caffeine by microdialysis, the concentration ratio of caffeine in the dialysate against that in the brain tissue or CSF was determined. The recovery percent was proved to be constant at 5 different steady-state plasma concentrations of caffeine (0.1-280 nmol/ml) and in different collecting periods of dialysate ranging from 30 s to 10 min. The mean recovery percent in the brain and CSF were 10.9 and 13.1%, respectively. Thus, microdialysis was proved useful for determination of drug concentration in the tissue and biological fluids with time resolution of more than 30 s. The microdialysis method was then applied for the chronological determination of caffeine concentration in the brain and CSF following intravenous bolus administration. The estimated caffeine concentration in the brain and CSF was the same as those obtained by direct determination in isolated brain and CSF, respectively. Transfer of caffeine from plasma to brain and CSF were further pharmacokinetically analyzed using a modified 2-compartment model. In this kinetic model, the transfer of caffeine between the CSF and brain was neglected, since the mutual transfer of caffeine was not detected in in vivo experiments. Calculated curves were well fitted on observed caffeine concentrations in the plasma, brain and CSF.     

Studies on cardiac ingredients of plants. IX. Chemical transformation of proscillaridin by utilizing its 1,4-cycloadducts as key compounds and biological activities of their derivatives.

Three aromatic compounds (2-4) possessing a carbomethoxyl group or a dimethoxyphthaloyl group, prepared by the Diels-Alder reaction of the cardiac glycoside, proscillaridin (1), with dimethyl acetylenedicarboxylate and methyl propiolate, were transformed into alcohols, carboxylic acids and amides. The biological activities of the resulting derivatives were evaluated by the use of Na+, K(+)-adenosine triphosphatase (Na+,K(+)-ATPase) from dog kidney and isolated guinea-pig papillary muscle. Although the biological activities of the resulting derivatives were less potent than that of 1, a para-substituted benzylalcohol (5), methylbenzamides (9a and 10a), and ethylbenzamides (9b and 10b) inhibited the activity of Na+,K(+)-ATPase almost as potently as naturally occurring cardiac glycosides such as digoxin and digitoxin.     

Effects of strain path shapes on non-proportional cyclic plasticity

The title problem was discussed to facilitate the formulation of constitutive models of cyclic plasticity under general states of loading. A series of plastic strain controlled cyclic tests was performed by applying combined axial force and torque to thin-walled tubular specimens of Type 316 stainless steel at room temperature. These tests consist of cyclic loading along uniaxial, torsional, cruciform, stellate in eight directions, square and circular plastic strain paths with a constant amplitude of equivalent plastic strain.The results of these tests showed that the strain-hardening depends markedly on the shape of the plastic strain path, and that the strain-hardening (measured by equivalent stress amplitudes) in the saturated state is significant in the order of circular, square, stellate, cruciform and proportional paths. It was also observed that these saturated values were independent of the less significant plastic strain cycles experienced in the past. Finally, the characteristic features of strain-hardening mechanisms under non-proportional loadings were discussed in some detail on the basis of the present results.     

Coating properties of a novel water stationary phase in capillary supercritical fluid chromatography

The coating properties of a novel water stationary phase used in capillary supercritical fluid chromatography were investigated. The findings confirm that increasing the length or internal diameter of the type 316 stainless‐steel column used provides a linear increase in the volume of stationary phase present. Under normal operating conditions, results indicate that about 4.9 ± 0.5 μL/m of water phase is deposited uniformly inside of a typical 250 μm internal diameter 316 stainless‐steel column, which translates to an area coverage of about 6.3 ± 0.5 nL/mm² regardless of dimension. Efforts to increase the stationary phase volume present showed that etching the stainless‐steel capillary wall using hydrofluoric acid was very effective for this. For instance, after five etching cycles, this volume doubled inside of both the type 304 and the type 316 stainless‐steel columns examined. This in turn doubled analyte retention, while maintaining good peak shape and column efficiency. Overall, 316 stainless‐steel columns were more resistant to etching than 304 stainless‐steel columns. Results indicate that this approach could be useful to employ as a means of controlling the volume of water stationary phase that can be established inside of the stainless‐steel columns used with this supercritical fluid chromatography technique.