Synthesis and characterization of water-soluble silver(I) complexes with L-histidine (H2his) and (S)-(-)-2-pyrrolidone-5-carboxylic acid (H2pyrrld) showing a wide spectrum of effective antibacterial and antifungal activities. Crystal structures of chiral helical polymers [Ag(Hhis)]n and ([Ag(Hpyrrld)]2)n in the solid state

Two water-soluble, silver(I) complexes showing a wide spectrum of effective antibacterial and antifungal activities, i.e., ([Ag(Hhis)].0.2EtOH)2 (1; H2his = L-histidine) and [Ag(Hpyrrld)]2 (3; H2pyrrld = (S)-(-)-2-pyrrolidone-5-carboxylic acid) were prepared. In aqueous solution 1 and 3 were present as dimers, whereas in the solid state they were polymers. Crystallization of 1 by slow evaporation and/or vapor diffusion gave water-insoluble crystals of [Ag(Hhis)]n (2) showing modest antimicrobial activities. The complex 1 in the solid state is a polymer formed by intermolecular hydrogen-bonding interactions between dimeric [Ag(Hhis)]2 cores, while 2 is a different polymer without a core complex. X-ray crystallography revealed that 2 was a left-handed helical polymer consisting of a bent, 2-coordinate silver(I) atom bonding to the Namino atom of one Hhis- ligand and the N pi atom of a different Hhis- ligand. Of particular note is the fact that Ocarboxyl atoms do not participate in the coordination. X-ray crystallography also revealed that 3 was a left-handed helical polymer formed by self-assembly of dimeric [Ag(Hpyrrld)]2 cores with an intramolecular metal(I)-metal(I) interaction (Ag-Ag distance, 2.9022(7) A). The FT-IR and the solid-state 13C and 15N NMR spectra showed that the dimeric core of 1 was formed through Ag-N bonds, while that of 3 was formed through Ag-O bonds. The molecular ions of 1 and 3 were detected by the positive-ion electrospray ionization (ESI) mass spectrometry. For 1-3, characterization by elemental analysis, TG/DTA, FT-IR, and variable-temperature solid-state 13C NMR and room-temperature 15N NMR measurements was performed, and for 1 and 3, that by solution molecular weight measurements and solution (109Ag, 1H, and 13C) NMR spectroscopies was also carried out. The antibacterial and antifungal activities of 1 and 3 were remarkable and comparable to those of the previous silver(I)-N-heterocycle complexes.     

New strategy for the total synthesis of macrosphelides a and B based on ring-closing metathesis

[reaction: see text] A new total synthesis of macrosphelides A and B using ring-closing metathesis (RCM) as a macrocyclization step is described. The substrate of the RCM could be synthesized from readily available chiral materials, methyl (S)-(+)-3-hydroxybutyrate and methyl (S)-(-)-lactate, with a high efficiency. The RCM proceeded in the presence of Grubbs' Ru-complex, providing a new effective synthetic route to these natural products.     

The high throughput analysis of N-methyl carbamate pesticides in fruits and vegetables by liquid chromatography electrospray ionization tandem mass spectrometry using a short column

We developed a new analysis method for the nine N-methyl carbamate pesticides in fruits and vegetables using ESI LC/MS/MS with direct sample injection into a short column. After extraction of the pesticides with ethyl acetate from sample, the extract is evaporated to dryness and redissolved in ultra pure water before injection into LC/MS/MS. The method needs no cleanup steps. The average recoveries from fruits and vegetables fortified at the level of 0.01 μg/g ranged from 56.0 to 119.1% with the coefficients of variation ranging from 0.2 to 7.6% for intra-day (n = 5 × 3 days) and from 0.8 to 18.4% for inter-day (n = 15). At the fortified level of 0.5 μg/g, the recoveries ranged from 67.7 to 119.3% with the coefficients of variation ranging from 0.5 to 7.8% for intra-day (n = 5 × 3 days) and from 0.9 to 14.8% for inter-day (n = 15). The method is considered to be satisfactory for the monitoring of the carbamate pesticide residues in fruits and vegetables, suggesting that the present method is applicable to other pesticide residues in foods.     

Catalytic asymmetric epoxidation of α,β-unsaturated carboxylic acid imidazolides and amides by lanthanide–BINOL complexes

Highly enantioselective catalytic asymmetric epoxidation of α,β-unsaturated carboxylic acid imidazolides and simple amides was developed. In the presence of 5–10 mol% of lanthanide–BINOL complexes, the reaction proceeded smoothly with high substrate generality. In particular, in the cases of α,β-unsaturated amides, there was nearly perfect enantioselectivity (>99% ee). The corresponding epoxides were successfully transformed into many types of useful chiral compounds such as α,β-epoxy esters, α,β-epoxy amides, α,β-epoxy aldehydes, α,β-epoxy β-keto ester, and α- and β-hydroxy carbonyl compounds. B3LYP density functional studies were performed to predict substrate reactivity.     

Mechanical properties and enzymatic degradation of poly[(R)-3-hydroxybutyrate] fibers stretched after isothermal crystallization near Tg

Poly[(R)-3-hydroxybutyrate] (P(3HB)) fibers with high tensile strength were prepared by stretching the fibers after isothermal crystallization near the glass transition temperature. Two samples with different molecular weights (M_w = 0.7 × 10⁶ and 4.3 × 10⁶) were used to investigate the effect on tensile strength. Increasing the time for isothermal crystallization of P(3HB) fibers resulted in a decrease in the maximum draw ratio. But, the tensile strength of P(3HB) fibers increased remarkably when the isothermal crystallization time was prolonged to more than 24 h. The tensile strength of low-molecular-weight drawn fibers was higher than that of high-molecular-weight fibers. Therefore, it can be concluded that this procedure does not increase the tensile strength of the high-molecular-weight drawn fibers. This is because, in this drawing method, small crystal nuclei grow initially during the isothermal crystallization process. Then, the molecular chains between the small crystal nuclei that acted as the entanglement points are oriented by stretching. In the case of the high-molecular-weight fibers, because the molecular length between the entanglement points of the small crystal nuclei is too long, the molecular chains are not sufficiently oriented by the stretching process. However, in the case of the low-molecular-weight fibers, the molecular length is suitable for generating the extended chains. Based on the result of X-ray analysis of P(3HB) fibers stretched after isothermal crystallization, fibers have the oriented α-form crystal with 2₁ helix conformation and β-form with planar zigzag conformation. The enzymatic degradation of the stretched P(3HB) fibers was performed by using an extracellular PHB depolymerase purified from Ralstonia pickettii T1. The enzymatic erosion rate of β-form was faster than that of α-form in the P(3HB) fibers stretched after isothermal crystallization.     

An efficient synthesis of cholanic acids from 20-ketopregnanes

An efficient synthesis of 3β-hydroxy-5-cholanic acid (8) and 3β-hydroxy-Δ⁵-cholanic acid (16) was carried out starting from 5-dihydropregnenolene (1) and pregnenolone (9). The monoacetates (3 and 11), prepared by Grignard reaction of 1 and 9 with 3,3-ethylenedioxypropylmagnesium bromide followed by acetylation, were dehydrated selectively to give the Δ²⁰⁽²²⁾-compounds (4 and 12) which on hydrogenation followed by acid treatment and Jones oxidation yielded 8 and 16, respectively.     

Synthesis of photoreactive poly(ether ether ketone)s containing alkyl groups

Poly(ether ether ketone)s containing alkyl groups were prepared by nucleophilic substitution reaction of alkyl-substituted difluoro diaryl ethers with hydroquinone or by electrophilic substitution reaction of alkyl-substituted diaryl ether with 4,4′-oxydibenzoic acid in PPMA. Polycondensations proceeded smoothly and produced polymers having inherent viscosities up to 0.5-–1.6 dL/g. The polymers were quite soluble in strong acid, dipolar aprotic solvents, and chloroform at room temperature. Thermogravimetry of the polymers showed excellent thermal stability, indicating that 10% weight loses of the polymers were observed in the range above 450°C in nitrogen atmosphere. The glass transition temperatures of the polymers ranged from 128 to 146°C. Furthermore, Polymer 3b functioned as a photosensitive resist of negative type for UV radiation. The resist had a sensitivity of 42 mJ/cm² and a contrast of 2.5, when it was postbaked at 100°C for 10 min, followed by development with THF/acetone at room temperature. © 1996 John Wiley & Sons, Inc.     

Living ring-opening polymerization of cyclic thiocarbonate

This work deals with the cationic ring-opening polymerization of a cyclic thiocarbonate, 5,5-dimethyl-1,3-dioxane-2-thione (1). The polymerization was carried out with 2 mol% of trifluoromethanesulfonic acid, methyl trifluoromethanesulfonate, boron trifluoride etherate, or triethyloxonium tetrafluoroborate as an initiator to afford the polythiocarbonate with the narrow molecular weight distribution (M_n = 11200-31000, M_w/M_n = 1.04-1.15). The molecular weight of the obtained polymer could be controlled by the feed ratio of the monomer to the initiator and increased when the second monomer was added to the polymerization mixture after quantitative consumption of 1 in the first stage, supporting that the cationic ring-opening polymerization of 1 proceeded via a living process.