Structures of 1,4-benzodioxane derivatives from the seeds of Phytolacca americana and their neuritogenic activity in primary cultured rat cortical neurons

The methanol extract of the seeds of Phytolacca americana was reinvestigated to yield three new 1,4-benzodioxane-type compounds, americanoic acid methyl ester (1), isoamericanoic acid A methyl ester (2), and 9'-O-methylamericanol A (3) along with the previously isolated neolignans 6-9. The structures of 1-3 were characterized by 2D NMR and long-range selective proton-decoupling (LSPD) techniques. The neuritogenic effects of compounds 1-3, and dicarboxilic acids 4 and 5, which had been previously synthesized with horseradish peroxidase-catalyzed oxidative coupling of caffeic acid, were examined in primary cultured rat cortical neurons. Americanoic acid A methyl ester (1) exhibited neurite outgrowth-promoting activity at concentration of 0.01-1.0 microM, whereas dicarboxilic acids 4 and 5 were found to induce neuritogenesis dose dependently at the concentrations from 0.1 microM to 10 microM.     

Radical-initiated homo- and copolymerization of cyanomethyl methacrylate

The kinetics of cyanomethyl methacrylate (CyMA) homopolymerization was investigated in acetonitrile with azobisisobutyronitrile as initiator. The rate of polymerization R_p was expressed by R_p = k[AIBN]^0.49[CyMA]^1.2 and the overall activation energy was calculated as 72.3 kJ/mol. Kinetic constants for CyMA polymerization were obtained as follows: k_p/k = 0.10 L^1/2s^?1/2; 2fk_d = 1.57 × 10^?5s^?. The relative reactivity ratios of CyMA(M₂) copolymerization with styrene (r₁ = 0.15, r₂ = 0.29) and methyl methacrylate (r₁ = 0.43, r₂ = 0.75) in acetonitrile were obtained. Applying the Q-e scheme (in styrene copolymerization) led to Q = 1.64 and e = 0.98. The glass transition temperature T_g of poly(CyMA) was observed to be 91°C by thermomechanical analysis. Thermogravimetry of poly(CyMA) showed a 10% weight loss at 265°C in air.     

Mass spectra of sulfinamide derivatives and identification of their thermal decomposition products

The mass spectra of 30 sulfinamide derivatives (RSONHR', R' alkyl or p-XC₆H₄) are reported. Most of the spectra had peaks attributable to thermal decomposition products. For some compounds these were identified by pyrolysis under similar conditions to be: RSO₂NHR', RSO₂SR, RSSR and NH₂R' (in all kinds of sulfinyl amides); RSNHR' (in the case of arylsulfinyl arylamides); RSO₂C₆H₄NH₂, RSOC₆H₄NH₂ and RSC₆H₄NH₂ (in the case of arylsulfinyl arylamides of the type of X = H) The mass spectra of the three thermally stable compounds showed that there are several kinds of common fragment ions. The mass spectra of the thermally labile compounds had two groups of ions; (i) characteristic fragment ions of the intact molecules and (ii) the molecular ions of the thermal decomposition products. It was concluded that the sulfinamides give the following ions after electron impact: [M]⁺, [M ? R]⁺, [M ? R + H]⁺, [M ? SO]⁺, [RS]⁺, [NHR']⁺, [NHR' + H]⁺, [RSO]⁺, [RSO + H]⁺, [R]⁺, [R + H]⁺, [R']⁺ and [M ? OH]⁺, and that the thermal decomposition products give the following ions: [RSO₂SR]⁺, [RSSR]⁺, [M ? O]⁺, [M + O]⁺ and [RSOC₆H₄NH₂]⁺.     

Medicinal foodstuffs. XXVII. Saponin constituents of gotu kola (2): structures of new ursane- and oleanane-type triterpene oligoglycosides, centellasaponins B, C, and D, from Centella asiatica cultivated in Sri Lanka

Ursane- and oleanane-type triterpene oligoglycosides, centellasaponins B, C, and D, were isolated from the aerial parts of Centella asiatica (L.) Urban cultivated in Sri Lanka together with madecassoside, asiaticoside, asiaticoside B, and sceffoleoside A. The chemical structures of centellasaponins B, C, and D were determined on the basis of chemical and physicochemical evidence to be madecassic acid 28-O-beta-D-glucopyranosyl(1-->6)-beta-D-glucopyranoside, madasiatic acid 28-O-alpha-L-rhamnopyranosyl(1-->4)-beta-D-glucopyranosyl(1-->6)-beta-D-glucopyranoside, and 3beta,6beta,23-trihydroxyolean-12-en-28-oic acid 28-O-alpha-L-rhamnopyranosyl(1-->4)-beta-D-glucopyranosyl(1-->6)-beta-D-glucopyranoside, respectively.     

Lewis Acid-Catalyzed Hydrostannation of Acetylenes. Regio- and Stereoselective Trans-Addition of Tributyltin Hydride and Dibutyltin Dihydride

Lewis acids such as ZrCl(4) or HfCl(4) catalyze the hydrostannation of acetylenes 1 by tributyltin hydride to produce the cis vinylstannanes 2 by regio- and stereoselective anti-hydrostannation. The hydrostannation of acetylenes using dibutyltin dihydride was also catalyzed by ZrCl(4) to give the stereodefined Z-Z divinyltin derivatives 4 by an anti-hydrostannation pathway. The use of nonpolar solvents such as toluene or hexane was essential for obtaining high stereoselectivity and chemical yield. Since ZrCl(4) and HfCl(4) are not soluble in such solvents, the hydrostannations were carried out in a heterogeneous system. The reactions of internal acetylenes with Bu(3)SnH proceeded smoothly, although the use of stoichiometric amounts of ZrCl(4) gave better results. The ZrCl(4)-catalyzed hydrostannation at 0 degrees C gave better yields and stereoselectivities than the reaction at room temperature. To help clalify the reason, the reaction of Bu(3)SnH with ZrCl(4) was monitored by (1)H and (119)Sn NMR spectroscopy, and it was found that Bu(3)SnH reacted with ZrCl(4) at room temperature to afford a mixture of tributyltin hydride, dibutyltin dihydride, and tetrabutyltin.     

Synthesis of benzylidene-pendant polyphthalimidines from flexible bisphthalides and various diamines

New polyphthalimidine-forming monomers, 5,5′-(oxydi-p-phenylenedicarbonyl)bis(3-benzylidenephthalide) and the 6,6′-derivative, were synthesized by the Friedel–Crafts reaction of diphenyl ether with 5- and 6-chloroformyl-3-benzylidenephthalide, respectively. The direct polycondensation of these bisphthalides with both aliphatic and aromatic diamines in o-phenylphenol at 200–250°C afforded polyphthalimidines having inherent viscosities of 0.2–1.2 dL/g in almost quantitative yields. Syntheses of aliphatic polyphthalimidines with higher inherent viscosities were also achieved by a two-step procedure involving ring-opening polyaddition and subsequent thermal cyclodehydration. All the polymers were amorphous and readily soluble in N-methyl-2-pyrrolidone (NMP), m-cresol, nitrobenzene, pyridine, and chloroform. Tough and flexible films could be cast from NMP solutions of the polymers. Glass transition temperatures of the polyphthalimidines were in the range of 158–246°C. The thermogravimetry of the aromatic polymers showed 10% weight loss in air and nitrogen at 445–515 and 500–520°C, respectively. The crosslinking reaction of some benzylidenependant polyphthalimidines took place at 300°C through double-bond addition to afford cured polymers with improved thermal stability.     

Synthesis of polyphthalimidines with benzylidene group from aminophthalide monomers

Two aminophthalide monomers, 6-amino-3-benzylidenephthalide (I) and 3-(p-aminobenzylidene)phthalide (II), underwent self-polycondensation in o-phenylphenol at 250°C to yield polyphthalimidines with inherent viscosities up to 0.5 dL/g. These polymers were readily soluble in a variety of solvents such as dimethylformamide, dimethyl sulfoxide, m-cresol, pyridine, and methylene chloride. The temperatures at which a 10% weight loss occurred by thermogravimetry in nitrogen were 460°C for the polymer derived from I and 490°C for the polymer from II. The glass transition temperature of the polymer from I was 332°C, determined by thermomechanical analysis.     

One- or two-dimensional organometallic arrays containing PdIr2(μ3-S)2 mixed-metal sulfido cluster units connected via the nicotinamide or isonicotinamide ligands on their Pd sites through hydrogen-bonding interactions

Mixed-metal sulfido cluster [(PdCl₂)(Cp*Ir)₂(μ₃-S)₂] (Cp*=η⁵-C₅Me₅) dissolved in CH₂Cl₂ reacted with two equivalent of L (L=nicotinamide, isonicotinamide, or N-methylnicotinamide) in the presence of AgBF₄ to give the cationic clusters [(PdL₂)(Cp*Ir)₂(μ₃-S)₂][BF₄]₂. The single-crystal X-ray diffraction studies of these products have disclosed that in the solid state the PdIr₂S₂ cores are self-assembled to form one-dimensional chains through the intermolecular hydrogen-bonding between the amide groups for L=nicotinamide or two-dimensional sheets via the hydrogen-bonding between the amide groups and the BF₄ anions for L=isonicotinamide, whereas no organization of the cluster cores is observed for L=N-methylnicotinamide.