A new dual-type DMA for measuring nanoparticles emitted from combustion engines

A new dual-type differential mobility analyzer (dual-type DMA) was developed in order to detect transient number concentrations of airborne nanoparticles with diameters centralized at around 10 nm (for nuclei mode particles) and 100 nm (for accumulation mode particles) in automobile exhaust gas. The apparatus divides the gas sample into two parts, and each part is sent through one of two coaxially nested sections for analysis. For the scanning mode measurement, the nanoparticles are charged by ²⁴¹Am and their size distributions are determined by varying the applied voltage over 2 min. The transient mode measurement, on the other hand, fixes the voltages for the two sections at peaks near 10 and 100 nm in order to monitor the transient behavior of the exhaust nanoparticles. The measurement principles and design of the dual-type DMA are detailed and the results for time response experiments are presented using model nanoparticles charged by a corona charger. The transient concentrations of the nuclei mode and the accumulation mode particles from a diesel engine were shown to be detected by this method, when ²⁴¹Am was used for charging the particles.     

Magnetic ordering of dangling bond networks on hydrogen-deposited Si(111) surfaces

Based on total-energy electronic-structure calculations within the density-functional theory, we find that a high spin state is realized for an ultimate dangling bond unit on an otherwise hydrogen-covered Si(111) surface. We further propose a systematic method of constructing nanometer-scale dangling bond networks that exhibit the ferrimagnetic spin ordering. The interplay between the electron-electron interaction and the surface reconstruction is elucidated.     

Chemical reactions of water molecules on Ru(0 0 0 1) induced by selective excitation of vibrational modes

Tunneling electrons in a scanning tunneling microscope were used to excite specific vibrational quantum states of adsorbed water and hydroxyl molecules on a Ru(0 0 0 1) surface. The excited molecules relaxed by transfer of energy to lower energy modes, resulting in diffusion, dissociation, desorption, and surface-tip transfer processes. Diffusion of H₂O molecules could be induced by excitation of the O-H stretch vibration mode at 445 meV. Isolated molecules required excitation of one single quantum while molecules bonded to a C atom required at least two quanta. Dissociation of single H₂O molecules into H and OH required electron energies of 1 eV or higher while dissociation of OH required at least 2 eV electrons. In contrast, water molecules forming part of a cluster could be dissociated with electron energies of 0.5 eV.     

Calculation of amino acid hydrophilicity indices for retention of peptides on amide, diol and silica columns in normal-phase liquid chromatography

Summary A set of hydrophilicity parameters in a normal-phase liquid chromatography of peptides is presented in order to clarify the contribution of individual amino acid residues to peptide retention and to predict retention times. The retention of 100 peptides was studied using normal-phase liquid chromatography on amide, diol and silica columns. An acetonitrile-water mixed solution containing 0.2% trifluoroacetic acid +0.2% triethylamine was used as the mobile phase in a linear gradient elution system. The contribution of each residue upon retention was calculated by linear multiple regression analysis. This paper described the contribution values as “hydrophilicity retention coefficients”. Using these hydrophilicity retention coefficients, retention times could be predicted for peptides of known amino acid content and sequence. A set of hydrophilicity retention coefficients on each column was successfully explained by contributions to the degree of retention.     

Magneto-Optical Properties of Silica Gel Containing Magnetite Fine Particles

The magnetic composite materials that consist of transparent matrix and magnetic fine particles are expected to have large residual magnetization and coercive force because of their fine magnetic domain structure, and also to show magneto-optical effects. Silica gels containing magnetite (Fe₃O₄) fine particles were prepared by sol-gel method. The magnetic, optical and magneto-optical properties of the composites were investigated by measurements of magnetization curves, UV-visible spectra and Faraday rotation in visible range. The saturation magnetization of the composite was almost as same as that expected from the amount of magnetite fine particles in it. Although the composites had large and broad absorption at around 400 nm, they still maintained their transparency. The origins of decrement of transparency attributed to the optical absorption of magnetite and scattering due to magnetite fine particles. The whole composites showed positive Faraday rotation under external static magnetic field due to the large contribution of diamagnetic silica gel matrix. Magnetite contributed negative Faraday rotation with maximum at around 470–480 nm to the magneto-optical spectra of the composites.     

Coupling of chromatographic ion-exchange reaction with change-partner reaction. Presumed mechanism on the ion-ion interaction of inorganic ions in Sephadex G-15 columns

A sample solution containing sodium or potassium dihydrogenphosphate or disodium or dipotassium hydrogenphosphate was eluted from a Sephadex G-15 column with either sodium or potassium chloride solution in various sample-eluent systems, and every one of the four kinds of ions employed was determined in the eluate. Then, the elution profiles showed the phenomenon that a negative peak of chloride ion coexisted in the fractions of a positive peak of phosphate ion, in all sample-eluent systems employed. This phenomenon was assumed to occur by the coupled reaction of change-partner and ion-exchange reactions including ion exclusion.     

Analysis on heat stress-induced hyperphosphorylation of stathmin at serine 37 in Jurkat cells by means of two-dimensional gel electrophoresis and tandem mass spectrometry

Two-dimensional gel electrophoresis (2-DE) and tandem mass spectrometry were successfully used for determination of a phosphorylation site of stathmin induced by heat stress to Jurkat cells of a human T lymphoblastic cell line. The cells were incubated for 30 min at 41 degrees C up to 45 degrees C in a serum free 4-(2-hydroxyethyl)-1-piperazineethanesulfonic acid (HEPES) buffered culture medium. The intracellular soluble proteins were separated by 2-DE, and some of the proteins increased their abundance by heat stress. Those proteins were identified to be calmodulin, protein kinase C substrate, thymosin beta-4 and F-actin capping protein beta-subunit by peptide mass fingerprinting (PMF) with matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS). On the contrary, protein phosphatase 2C gamma-isoform, nucleophosmin, translationally controlled tumor protein, Rho GDP-dissociation inhibitor-1, eukaryotic translation initiation factors 5A and 3A subunit 2, ubiquitin-like protein SMT 3B and chloride intracellular channel protein-1 were decreased their abundance. A protein spot of M(r) 18,000 and pI 5.9 was markedly increased at temperatures higher than 43 degrees C at which the cells were led to apoptosis. The spot was identified to be stathmin of a signal relay protein which has a function of sequestering microtubule. MALDI-quadrupole ion trap (QIT)-TOF-MS/MS and immunoblotting with a monoclonal antibody specific for a phosphorylation site of stathmin showed that the spot was a phosphorylated stathmin at serine 37 (Ser 37). The phosphorylation was suppressed by treatment of cells with olomoucine of an inhibitor specific for cyclin dependent kinase (Cdk-1). These results strongly suggest that heat stress activates Cdk-1 which phosphorylates Ser 37 on the stathmin molecule. The phosphorylation may cause the functional loss of stathmin for dynamic microtubule assembly and leads Jurkat cells to cell cycle arrest and apoptosis.     

Comparative investigation of the cleavage step in the synthesis of model peptide resins: implications for Nalpha-9-fluorenylmethyloxycarbonyl-solid phase peptide synthesis

Based on our studies of the stability of model peptide-resin linkage in acid media, we previously proposed a rule for resin selection and a final cleavage protocol applicable to the Nalpha-tert-butyloxycarbonyl (Boc)-peptide synthesis strategy. We found that incorrect choices resulted in decreases in the final synthesis yield, which is highly dependent on the peptide sequence, of as high as 30%. The present paper continues along this line of research but examines the Nalpha-9-fluorenylmethyloxycarbonyl (Fmoc)-synthesis strategy. The vasoactive peptide angiotensin II (AII, DRVYIHPF) and its [Gly8]-AII analogue were selected as model peptide resins. Variations in parameters such as the type of spacer group (linker) between the peptide backbone and the resin, as well as in the final acid cleavage protocol, were evaluated. The same methodology employed for the Boc strategy was used in order to establish rules for selection of the most appropriate linker-resin conjugate or of the peptide cleavage method, depending on the sequence to be assembled. The results obtained after treatment with four cleavage solutions and with four types of linker groups indicate that, irrespective of the circumstance, it is not possible to achieve complete removal of the peptide chains from the resin. Moreover, the Phe-attaching peptide at the C-terminal yielded far less cleavage (50-60%) than that observed with the Gly-bearing sequences at the same position (70-90%). Lastly, the fastest cleavage occurred with reagent K acid treatment and when the peptide was attached to the Wang resin.     

Highly beta-selective O-glucosidation due to the restricted twist-boat conformation

[reaction: see text] Ethyl 1-thio-2,3,4,6-tetrakis-O-triisopropylsilyl-beta-d-glucopyranoside, ethyl 6-O-benzyl-1-thio-2,3,4-tris-O-triisopropylsilyl-beta-d-glucopyranoside, and ethyl 6-O-pivaloyl-1-thio-2,3,4-tris-O-triisopropylsilyl-beta-d-glucopyranoside induced highly beta-selective O-glucosidations. Among them, the 6-O-pivaloylated substrate provided the best selectivity up to alpha/beta = 3:97 with cyclohexylmethanol, and the substrate was used for glucosidations with secondary and tertiary alcohols in a highly beta-selective manner. The selectivity would be caused by the twist-boat conformation of the pyranose; this is the first beta-selective O-glucosidation based on conformational control of the pyranose ring.     

Formation of cyclic organosilicon compounds via organopolysilyl anions starting from methoxymethyldisilanes. A mechanistic study

In the presence of a catalytic amount of sodium methoxide, sym-dimethoxytetramethyldisilane was converted into α,ω-dimethoxypermethylpolysilanes, MeO(SiMe₂)_nOMe where n ? 3, at room temperature. On the other hand, similar treatment of the disilane in THF solution gave cyclic polysilanes, (Me₂Si)_n where n = 5–7. Decomposition of the disilane in the presence of diphenylacetylene afforded a trisilacyclopentene derivative under similar conditions. This compound was obtained also by the reaction between α,ω-dimethoxypermethylpolysilanes and diphenylacetylene in the presence of sodium methoxide. These cyclic products most likely were formed via permethyl polysilyl anion intermediates derived from α,ω-dimethoxypermethylpolysilanes. Also, the formation of α,ω-dimethoxypermethylpolysilanes could be elucidated in terms of the mechanism involving the base-assisted, concerted nucleophilic substitution or stepwise substitution by silyl anions, rather than the successive dimethylsilylene (Me₂Si:) insertion reaction.