Heat Transfer Evaluation Method in Complex Rotating Environments Employing IR Thermography and CFD

This article presents a measuring method for determination of convective heat transfer in rotating environments. The method is used to obtain temperature and Nusselt number distributions on optically accessible objects inside real operating environments, without the need for implementation of complex surface heat flux measurements. Temperature maps of the observed surfaces are acquired non-intrusively by infrared (IR) thermography, whereas heat flux data is computed numerically by computational fluid dynamics (CFD) tools. The method was employed on a rotating hollow blade, heated internally by secondary air flow. Experimental and numerical results for the observed blade side are compared in terms of surface temperature 2D distributions. Temperature distributions are further statistically evaluated and show good agreement, which is the basic precondition for combining experimental and numerical data by the method. Results are presented in terms of combined experimental-numerical Nusselt number shown as two-dimensional distribution on the blade pressure side.     

Dual-oriented thin crystals of molybdenum grown under Ar+ ion bombardment

Ar⁺ sputtering of an Cu(111) surface while simultaneously supplying Mo atoms is known to induce an oriented growth of Mo thin crystals, or seed-layers, on evolving conical Cu protrusions. The seed-layers thus formed are shown to be dual-oriented, or bicrystalline, consisting of columnar crystallites grown homo-epitaxially. The orientation relationship between the two types of crystallites was (100)_I (111)_II with [001]_I [110]_II, and this bicrystallinity probably resulted from a non-uniform charge-up of the layers' growth front. As concluded from high-resolution electron microscopy, the Mo(100) stacking is elastically converted into the Mo(111) stacking and vice versa, under the influence of tensile stress. The homo-epitaxy that the seed-layers exhibited is believed to reflect the mutual convertibility of the Mo(100) and (111) stackings.     

Dynamic photoelastic analysis by optical heterodyne polarimetry

This paper describes the mapping of the spatiotemporal principal stress distribution evolved with time in an epoxy photoelastic sample. In the optical heterodyne polarimeter exploited, the signal beam of light transmitted by the sample under continuously loaded condition is photomixed with the local oscillator beam of light made up of orthogonal linearly polarized two-frequency components. Every pixel of a MOS video camera used generates a beat photocurrent that possesses the two orthogonal field components of the elliptically polarized signal beam. The spatiotemporal principal stress distributions can be uniquely determined simultaneously and independently from these two orthogonal field components, and are successfully mapped in a time-sequential form. The spatial and temporal resolutions in the maps are 0.18 mm and 2.9 ms, respectively.     

Phase rotation scheme of laser-produced ions for reduction of the energy spread

In order to widely spread out particle beams utilized in cancer therapy, laser-produced ions are developed as the injection beam for an ion synchrotron dedicated for cancer therapy. Such a laser ion source is expected to contribute largely to the realization of compactness of the size and low cost of the cancer therapy accelerator. The energy spectrum of the laser-produced ions, however, has no peak, but their intensities decrease exponentially according to the increase of the energy. For the purpose of modifying such a situation, we have proposed a scheme to rotate the beam in the longitudinal phase space with the use of the RF electric field, which is phase-adjusted with the pulse laser. We aim for a reduction of the energy spread of ± 5% selected by an energy analyzer and slits to ±1% by such phase rotation. For this purpose, a quarter wavelength resonator with two gaps with the same resonant frequency as the source laser has already been fabricated, together with its RF power source. The above phase rotation system and its recent experimental realization are presented.     

Optical conductivity spectral anomalies in the off-center rattling system β-Ba8Ga16Sn30

We present optical conductivity studies of the type-I clathrate Ba8Ga16Sn30, using a terahertz time-domain spectrometer (0.3-3.0?THz). The lowest-lying spectral peak at 0.72?THz due to the Ba(2) ion's off-center vibration in the oversized cage shows a drastic and anomalous temperature dependence. Below about 100?K, the single broad peak splits into two subpeaks, and with further lowering of the temperature, the spectral shape of this so-called rattling phonon shows non-Boltzmann broadening to the point that the linewidth becomes comparable to the peak frequency. Whereas the initial splitting can be understood by assuming a multiwell anharmonic potential, the strong linewidth broadening toward low temperature cannot, since the Boltzmann factor generally sharpens the low-temperature spectra. The observed behavior suggests strong interaction between the local anharmonic phonons and other excitations.     

Trapped Positrons and Electrons in the Inner Radiation Belt According to Data of the PAMELA Experiment

Measurements of secondary-electron and secondary-positron fluxes below the geomagnetic cutoff in near-Earth space were performed by means of the PAMELA magnetic spectrometer installed on board the Resurs-DK1 satellite launched on June 15, 2006, in an elliptical orbit of inclination 70° and altitude 350 to 600 km. This spectrometer permits measuring the fluxes of electrons and positrons over a wide energy range, as well as determining their spatial distributions to a precision of about 2°. A calculation of particle trajectories in the geomagnetic field makes it possible to separate electrons and positrons originating from cosmic-ray interactions in the Earth’s magnetosphere. The spatial distributions of quasitrapped, trapped, and short-lived albedo positrons and electrons of energy above 70 MeV in the radiation belt were analyzed. The ratio of the electron-to-positron fluxes and the energy spectra of the electrons and positrons in question are indicative of different productionmechanisms for stably trapped and quasitrapped secondary particles.     

T-violation neutron experiment and polarized3He

An experimental scheme of the spin detailed balance in polarized neutron transmission through a polarized nuclear target is discussed for the T-violation test. The value of the spin detailed balance is estimated by using the data of the scattering amplitudes. The nuclear polarizations of proton,³He and¹³⁹La are discussed for the T-violation experiment.     

Mammalian-specific genomic functions: Newly acquired traits generated by genomic imprinting and LTR retrotransposon-derived genes in mammals

Mammals, including human beings, have evolved a unique viviparous reproductive system and a highly developed central nervous system. How did these unique characteristics emerge in mammalian evolution, and what kinds of changes did occur in the mammalian genomes as evolution proceeded? A key conceptual term in approaching these issues is “mammalian-specific genomic functions”, a concept covering both mammalian-specific epigenetics and genetics. Genomic imprinting and LTR retrotransposon-derived genes are reviewed as the representative, mammalian-specific genomic functions that are essential not only for the current mammalian developmental system, but also mammalian evolution itself. First, the essential roles of genomic imprinting in mammalian development, especially related to viviparous reproduction via placental function, as well as the emergence of genomic imprinting in mammalian evolution, are discussed. Second, we introduce the novel concept of “mammalian-specific traits generated by mammalian-specific genes from LTR retrotransposons”, based on the finding that LTR retrotransposons served as a critical driving force in the mammalian evolution via generating mammalian-specific genes.