Miscibility and hydrolytic degradation in alkaline solution of poly(l-lactide) and poly(p-vinyl phenol) blends

Poly(l-lactide) (PLLA) was melt-blended with poly(p-vinyl phenol) (PVPh) using a two-roll mill, and the miscibility between PLLA and PVPh and degradation of the blend films were investigated. It was found that PLLA/PVPh blend has miscibility in the amorphous state because only single T_g was observed in the DSC and DMA measurements. The T_g of the PLLA/PVPh blend could be controlled in the temperature range from 55 °C to 117 °C by changing the PVPh weight fraction. In alkaline solution, degradation rate of PLLA/PVPh blends was faster than that of neat PLLA because PVPh could dissolve in alkaline solution. The surface morphology of degraded PLLA and PLLA/PVPh blend were observed by SEM. The surface morphology of degraded PLLA/PVPh blend was finer than that of PLLA. Young's modulus of PLLA/PVPh blend increased with increasing PVPh content. Yield stress of PLLA/PVPh blends whose PVPh content was less than 30 wt% kept the level of about 55 MPa and that of PLLA/PVPh blend whose PVPh content was 40 wt% is much lower than that of neat PLLA.     

Application of extraction chromatography to the separation of thorium and uranium dissolved in a solution of high salt concentration

Extraction chromatography with commercially available UTEVA resin (for uranium and tetravalent actinide) was applied for the separation of Th and U from control solutions prepared from a multi-element control solution and from sample solutions of solidified simulated waste. Thorium and U in control solutions with 1-5mol/dm(3) HNO(3) were extracted with UTEVA resin and recovered with a solution containing 0.1mol/dm(3) HNO(3) and 0.05mol/dm(3) oxalic acid to be separated from the other metallic elements. Extraction behavior of U in the sample solutions was similar to that in the control solutions, but extraction of Th was dependent on the concentration of HNO(3). Thorium was extracted from 5mol/dm(3) HNO(3) sample solutions but not from 1mol/dm(3) HNO(3) sample solutions. We conjecture that thorium fluoride formation interferes with extraction of Th. Addition of Al(NO(3))(3) and Fe(NO(3))(3), which have higher stability constant with fluoride ion than Th, does improve extractability of Th from 1mol/dm(3) HNO(3) sample solution.     

Cyclopalladation of mono-, di- and tribenzylamine by palladium(II) acetate: Influence of bulkiness around the nitrogen atom of benzylamine upon internal metallation

Cyclopalladation of mono-, di- and tribenzylamine has been investigated by reacting the corresponding amines with an equimolar amount of palladium(II) acetate (reaction i), or by heating the corresponding bis-amine complexes [Pd(O₂CMe)₂{(PhCH₂)_nNH_3−n}₂] (n=1, 2) (reaction ii). By the reaction i, all the three amines undergo cyclopalladation. However, in the case of the reaction ii, only the dibenzylamine complex [Pd(O₂CMe)₂{(PhCH₂)₂NH}₂] has been converted into a cyclopalladated complex. The reactivity of the three benzylamines towards cyclopalladation has been discussed in terms of the co-ordinating ability influenced by the bulkiness around the nitrogen atom. Temperature-dependent ¹H-NMR spectra are observed for mononuclear cyclopalladated complexes [Pd(O₂CMe){C₆H₄CH₂N(CH₂Ph)₂–C¹, N}L] (L=PPh₃, AsPh₃) and are attributed to the dissociation of the nitrogen atom in the cyclopalladated chelate ring. A heteroleptic bis-cyclopalladated complex [Pd[C₆H₄CH₂N(CH₂Ph)₂–C¹, N](C₆H₄CH₂NMe₂–C¹, N)] has also been prepared. X-ray crystallographic studies on [{Pd(O₂CMe)[C₆H₄CH₂N(CH₂Ph)₂–C¹, N]}₂] and [Pd[C₆H₄CH₂N(CH₂Ph)₂–C¹, N](C₆H₄CH₂NMe₂–C¹, N)] have been reported.     

Chemical reactions of water molecules on Ru(0 0 0 1) induced by selective excitation of vibrational modes

Tunneling electrons in a scanning tunneling microscope were used to excite specific vibrational quantum states of adsorbed water and hydroxyl molecules on a Ru(0 0 0 1) surface. The excited molecules relaxed by transfer of energy to lower energy modes, resulting in diffusion, dissociation, desorption, and surface-tip transfer processes. Diffusion of H₂O molecules could be induced by excitation of the O-H stretch vibration mode at 445 meV. Isolated molecules required excitation of one single quantum while molecules bonded to a C atom required at least two quanta. Dissociation of single H₂O molecules into H and OH required electron energies of 1 eV or higher while dissociation of OH required at least 2 eV electrons. In contrast, water molecules forming part of a cluster could be dissociated with electron energies of 0.5 eV.     

Gas chromatography/time‐of‐flight mass spectrometry of triacetone triperoxide based on femtosecond laser ionization

Triacetone triperoxide (TATP), which is used as an explosive in acts of terrorism, was measured by means of gas chromatography/multiphoton ionization/time‐of‐flight mass spectrometry using a deep‐ultraviolet (deep‐UV) femtosecond laser as an ionization source. The fragmentation process was investigated by changing the intensity of the laser at the center axis of a molecular beam. A molecular ion was observed using a femtosecond laser, and the ratio of the intensities of the molecular and fragment ions decreased as the intensity of the laser increased. These results suggest that TATP can be efficiently ionized using a deep‐UV, ultrashort optical pulse. Furthermore, fragmentation was accelerated by excess energy supplied through higher‐order multiphoton processes under a strong radiation field. The detection limits obtained using the molecular ion and two dominant fragment ions, C₂H₃O⁺ and CH, were determined to be 670, 83 and 150 pg, respectively. Copyright © 2009 John Wiley & Sons, Ltd.     

Properties of a Non-Aromatic Epoxy Polymer-Based Monolithic Capillary Column for μ-HPLC

We report the chromatographic properties of a new type of epoxy polymer-based monolithic capillary column, the Tetrad-C column. The column was prepared by a completely new method—reaction of a tetra-functional epoxy monomer, 1,3-bis(N,N-diglycidylaminomethyl)cyclohexane (trade name Tetrad-C), with a diamine, 4-[(4-aminocyclohexyl)methyl)cyclohexane (BACM). This polymer monolith has no aromatic functional groups reducing chromatographic performance. The columns were carefully observed by scanning electron microscopy and evaluated chromatographically by use of a μ-HPLC system. It was found that morphological control of the epoxy polymer-based monolith was possible simply by changing the polymerization conditions, i.e., the polymerization temperature and/or the relative amounts of porogenic solvent and BACM. Another advantage was that volumetric shrinkage of the tetra-functional epoxy-based monolith during the polymerization reaction was much less than for the tri-functional epoxy-based monolithic (TEPIC) column reported in our previous paper. A Tetrad-C column 200 mm long afforded up to 10,000 plates for alkylbenzenes in reversed-phase-mode. This column can also work in HILIC mode, although the hydrophobicity of the column was greater than that of the TEPIC column. Heat treatment (160 °C for 2 h; to eliminate residual, unreacted, functional groups) had a negligible effect on column performance, indicating the columns were thermally stable.     

Enhancement of optical birefringence in tellurite glasses containing silver nanoparticles induced via thermal poling

Wavelength-selective enhancement of optical birefringence has been observed in a tellurite glass containing silver nanoparticles (Ag NPs) induced via thermal poling. The birefringence appears as an optical rotation of linearly polarized light; a large optical rotation is observed at around the wavelength of localized surface plasmon resonance (LSPR) of Ag NPs. The optic axis is oriented along the electric field applied during the thermal poling, suggesting that birefringence induced in the glass matrix through the thermal poling is drastically enhanced by the NPs at around the LSPR. Because of the birefringence of the matrix, the wavelength of LSPR shifts depending on the polarization state of the incident light, which in turn induces the polarization dependence of the real part of the refractive index via the Kramers–Kronig relation.