Determination of bithionol, bromophen, nitroxynil, oxyclozanide, and tribromsalan in milk with liquid chromatography coupled with tandem mass spectrometry

LC/MS/MS was developed to determine the residues of bithionol (BTN), bromofen (BMF), nitroxynil (NTX), oxyclozanide (OCZ), and tribromsalan (TBS) in milk. Samples were extracted with ethyl acetate and cleaned up by liquid-liquid separation with acetonitrile and n-hexane. The compounds were determined by RP-LC using a C18 column with 0.1% formic acid-methanol. Mass spectral acquisition was performed in the negative mode by applying selected-reaction monitoring. The method was validated in milk spiked with these compounds at 5-600 microg/kg; average recoveries were in the range 83.8-97.1%, with RSD values of 1.4-8.0%. The interassay RSDs were less than 11%. The LODs of these compounds in milk were 0.1 microg/kg. The method was applied to 24 raw milk samples. The concentration of these compounds in all samples was lower than the Japanese maximum residue limits. The method is rapid, sensitive, and specific for monitoring residues of BTN, BMF, NTX, OCZ, and TBS in milk.     

Analysis of Th, U, Pu, and Am in radioactive metal waste using extraction chromatography

In order to analyze actinide elements in radioactive metal waste, the dissolution and chemical separation conditions were optimized. The surfaces of a type 304 stainless steel plate and of pipe waste sampled from the prototype advanced thermal reactor (Fugen) were dissolved in mixed acid solution (HNO₃:HCl:H₂O = 1:1:4). The resulting solution was evaporated to dryness and dissolved with 2 mol/dm³ of HNO₃ to prepare sample solutions. In order to analyze trivalent actinide elements in the sample solution containing a large amount of Fe(III) (>0.1 g) using TRU resin, the effect of Fe(III) concentration on the recovery of Am(III) and reduction effect of Fe(III) to Fe(II) with ascorbic acid were studied. On the basis of results of this study, chemical separation scheme was constructed and Pu and Am in the sample solutions were separated. Thorium and U in the sample solutions were separated with UTEVA resin. High recoveries for all experimented elements were obtained from the analysis of spiked sample solutions, the effectiveness of the method was confirmed.     

Single-shot polarization-imaging digital holography based on simultaneous phase-shifting interferometry

We propose single-shot digital holography which is capable of simultaneously capturing both the information of multiple phase-shifted holograms and the distribution of the polarization. In this technique, a single image sensor records both the information required for phase-shifting interferometry and that of the polarization states of objects using an array of polarizers. The essence of the technique is the capability of imaging the distribution of the polarization of three-dimensional objects with a single-shot exposure by using the space-division multiplexing of holograms. The validity of the proposed technique was confirmed by the preliminary experiments.     

Application of 28Mg to the kinetic study of Mg uptake by rice plants

The time course of Mg uptake and release using intact rice plants and ²⁸Mg as a tracer is presented. Since there is no conventional Mg tracer available, ²⁸Mg was produced via ²⁷Al(α, 3p)²⁸Mg reaction using a cyclotron. Using the purified ²⁸Mg tracer, it was found that the uptake amount of ²⁸Mg by the rice plants increased linearly during 30 min of application. After ²⁸Mg treatment for 90 min, the roots were sequentially washed with iced solution for 120 min. Within about 10 min, almost all of the ²⁸Mg, that was thought to be weakly bound to the apoplast, was washed away.     

Effects of the molecular properties of mixed solvents on the elution of alkyl benzoates in RPLC.

The retention behavior and mechanism of methyl, ethyl, propyl, isopropyl, buthyl and isobuthyl benzoates have been studied at different eluent compositions of aqueous mixtures with water-soluble organic solvents (methanol, ethanol, 1-propanol, 2-propanol, acetonitrile (AN), 1,4-dioxane and tetrahydrofuran (THF)) in RPLC. The retention of the solutes is discussed based on the solvent composition, solvent polarity (ETN value), preferential solvation, hydrogen bonding and solvent clusters of the eluents. The smaller ETN values and the larger preferential solvation of the mixed solvent eluted the solutes faster. The IR spectra of HDO suggested that the solvents, except for methanol and ethanol, break the hydrogen bonding between water molecules, resulting in fast elution of the solutes. Based upon the results, we chose an optimum solvent composition for the separation of benzoates and applied it to the determination of the benzoates in clove.     

InGaAsP multiple quantum well edge-emitting light-emitting diode showing low coherence characteristics using selective-area metalorganic vapor phase epitaxy

Low coherence multiple-quantum well edge-emitting light-emitting diodes were obtained using selective-area metalorganic vapor-phase epitaxial growth, which utilized growth rate enhancement on an open stripe region between mask stripes. An optical absorption region, which was controlled by selective-area growth, was introduced to suppress optical feedback. At a driving current of 100 mA and an ambient temperature of 25°C, a power of 55 μW was coupled into a single-mode fiber, and a broad spectrum without spectral ripple was observed. Low coherence characteristics and very small temperature dependence were obtained in the temperature range from -40°C to 85°C. The modulation bandwidth was 210 MHz at a bias current of 100 mA.     

On‐line Liquid‐liquid Extraction Coupled to a Reversed Micellar‐mediated Chemiluminescence Detection System: Application to the Determination of Amino/Nitroaromatic Compounds

A simple and fast flow method for the trace level determination of p‐toluidine, 2‐methyl‐5‐nitroaniline, and 2,4‐dinitroaniline in aqueous samples is reported. These amino/nitroaromatics are related to trinitrotoluene (TNT) and appear during the degradation process of the explosive. The chemical principles of ion‐pair formation and liquid‐liquid extraction are applied: In aqueous acidic medium, the protonated analyte [HA]⁺ makes an ion‐pair with the tetrachloroaurate(III) ion, followed by on‐line ion‐pair extraction into the dichloromethane carrier used. After membrane separation, the CH₂Cl₂ containing the ion‐pair, [HA]⁺[AuCl₄]⁻, is mixed with the reversed micellar luminescent reagent of luminol (in 0.3 M Na₂CO₃) prepared from cetyl‐trimethylammonium chloride in CH₂Cl₂‐cyclohexane and the [AuCl₄⁻‐luminol chemiluminescence (CL) output is recorded. The detection limits (S/N> 3) are: p‐toluidine, 1.0 × 10⁻⁴M; 2‐methyl‐5‐nitroaniline, 1.0 × 10⁻⁷ M; 2,4‐dinitroaniline, 1.0 × 10⁻⁷ M, while the calibration curves are linear between 1.0 × 10⁻⁴ — 1.0 × 10⁻² M for all the compounds. Although spectral studies indicated the formation and extraction of a very small amount of the ion‐pair species, the reversed micellar‐mediated CL detection system provides an alternative procedure for the determination of degradation products of the explosive TNT in environmental aqueous samples.     

Dynamic photoelastic analysis by optical heterodyne polarimetry

This paper describes the mapping of the spatiotemporal principal stress distribution evolved with time in an epoxy photoelastic sample. In the optical heterodyne polarimeter exploited, the signal beam of light transmitted by the sample under continuously loaded condition is photomixed with the local oscillator beam of light made up of orthogonal linearly polarized two-frequency components. Every pixel of a MOS video camera used generates a beat photocurrent that possesses the two orthogonal field components of the elliptically polarized signal beam. The spatiotemporal principal stress distributions can be uniquely determined simultaneously and independently from these two orthogonal field components, and are successfully mapped in a time-sequential form. The spatial and temporal resolutions in the maps are 0.18 mm and 2.9 ms, respectively.     

Spontaneous Formation of Microgroove Arrays on the Surface of p‐Type Porous Silicon Induced by a Turing Instability in Electrochemical Dissolution

Self‐organization plays an imperative role in recent materials science. Highly tunable, periodic structures based on dynamic self‐organization at micrometer scales have proven difficult to design, but are desired for the further development of micropatterning. In the present study, we report a microgroove array that spontaneously forms on a p‐type silicon surface during its electrodissolution. Our detailed experimental results suggest that the instability can be classified as Turing instability. The characteristic scale of the Turing‐type pattern is small compared to self‐organized patterns caused by the Turing instabilities reported so far. The mechanism for the miniaturization of self‐organized patterns is strongly related to the semiconducting property of silicon electrodes as well as the dynamics of their surface chemistry.