Measurements of short-lived cosmogenic nuclides in rain samples

Summary Extremely low activity levels of cosmic ray induced nuclides have been measured in freshly precipitated rainwater by quick chemical separation coupled with ultra low background gamma-spectrometry. The nuclides detected were ³⁸S (T_1/2 = 2.83 h)-³⁸Cl (37.2 m), ³⁹Cl (55.6 m), ²⁴Na (14.96 h), ²⁸Mg (20.9 h), ⁷Be (53.3 d) and ²²Na (2.602 y). The number of atoms in rain water were evaluated to be ranging from 400-1900 l^-1 for ³⁹Cl (n = 6, mean: 1200), 30-1500 l^-1 for ²⁴Na (n = 16, mean: 520), 80-600 l^-1 for ²⁸Mg (n = 13, mean: 260), 1 ^. 10⁶-4 ^. 10⁷ l^-1 for 7Be (n = 16, mean: 7 ^. 10⁶) and 2 ^. 10³-1 ^. 10⁵ l^-1 for ²²Na (n = 9, mean: 2 ^. 10⁴). Measurements of activity levels and activity ratios of short-lived cosmic-ray induced short-lived nuclides will open new method to understand atmospheric processes occurred at the altitude of rain cloud.     

Sol–gel preparation and properties of hydroxypropylcellulose–titania hybrid thin films

Hydroxypropylcellulose (HPC)–titania hybrid thin films were prepared by sol–gel method where titanium tetraisopropoxide Ti(OC₃H₇ ⁱ )₄ was hydrolyzed under acidic conditions in the presence of HPC, followed by dip-coating and drying at 120 °C for 24 h. The viscosity average molecular weight of HPC was 55,000–70,000 or 110,000–150,000, and the TiO₂/(HPC + TiO₂) mass ratio ranged from 0 to 1, which was calculated on the assumption that all Ti(OC₃H₇ ⁱ )₄ is converted into TiO₂. The films were 0.35–1.0 μm thick, transparent in visible region and opaque in ultraviolet (UV) region, where the optical absorption coefficient in UV region increased with increasing titania content. The refractive index increased with increasing titania content, ranging from 1.6 to 1.8 for the hybrid thin films. The pencil hardness increased from 6B to 5H, the durability in hot water significantly increased and the contact angle of water on films increased from 35° to 89° with increasing titania content. Crack-free films could be deposited on organic polymer substrates irrespective of titania or HPC contents, where cracking did not occur at higher HPC contents even when the substrate was bent.     

Determination of molecular weight of native proteins by polyacrylamide gradient gel electrophoresis

An improved method for the estimation of molecular weights of native proteins by polyacrylamide gel electrophoresis, in 9 cm x 9 cm x 0.05 mm 4-20% T fabric reinforced gradient gels, is described. Plotting the logarithm of the relative mobilities of proteins versus gel concentrations produces lines whose slopes are related to molecular weights.     

Cation-pi interactions of a thiocarbonyl group and a carbonyl group with a pyridinium nucleus

Attractive interactions between a thiocarbonyl group and a pyridinium nucleus, and between a carbonyl group and a pyridinium nucleus have been proven by (1)H and (13)C NMR studies, UV-vis spectral analyses, and X-ray crystallographic analyses of nicotinic amides 1 and 3, and pyridinium salts 2 and 4. Comparison of the Deltadelta values, which are the differences in the chemical shifts with reference compounds 5 or 6, showed that the absolute Deltadelta values of 2 and 4 are much larger than those of 1 and 3. In the UV-vis spectra, the n-->pi absorption of the C=S group of 2a exhibited a significant blue shift in CHCl(3). X-ray crystallographic analysis of 1-4 clearly showed that the C=S group of 2a and the C=O group of 4 are very close to the pyridinium moiety compared to the case of 1 and 3. In addition, the X-ray crystal packing structure of 2a showed the C=S group is sandwiched between two pyridinium rings. These experimental results strongly suggested the existence of attractive (C=S)...Py(+) and (C=O)...Py(+) interactions in solution and in crystal. The optimized geometries of 1 and 2 calculated at the HF/6-311G level are in good agreement with their X-ray geometries. MP2/6-311G calculations for the model systems of pyridinium salts 2 and 4 predicted that the electrostatic and induction energies are the major source of the attractive interactions. Since the larger contribution of electrostatic and induction interactions are characteristic features of cation-pi interactions, the (C=S)...Py(+) and (C=O)...Py(+) interactions would be classified as a cation-pi interaction.     

Application of non-thermal atmospheric pressure ac plasmas to the carbon dioxide reforming of methane

Methane conversions of 11.9%, yields of hydrogen as high as 23.3% and energy yields of 1.0 mol H₂/kWh have been achieved from CO₂ reforming of CH₄ in non-thermal, atmospheric pressure plasma reactors with Pt coated electrodes. Two reactors have been studied. A novel fan type reactor consisting of a movable rotor and immobile stator produced the highest yields in contrast to a tube type (silent discharge) reactor with a glass dielectric barrier. Conversions, yields of hydrogen and energy yields (expressed as mol H₂/kWh) were studied for CO₂/CH₄ concentrations of 1.1% and 5.0% in He as a function of flow rate and input voltage. Hydrogen yields are observed to increase as the input voltage is increased from 411 V to 911 V and the flow rate is decreased from 100 cc/min to 30 cc/min. Energy yields vary only slightly with input voltage and flow rate. Hydrogen yields show little dependence on CO₂/CH₄ concentrations, but energy yields are approximately five times greater for the 5.0% mixture than the 1.1% mixture. Selectivities to H₂, CO, coke, and low molecular weight hydrocarbons were also evaluated and compared to data obtained without CO₂ in the feed. Hydrogen selectivities of nearly 100% were obtained, with small amounts of ethane and propane as the only observed side products and the selectivites were approximately the same whether CO₂ was present or absent in the mixture. However, the reaction proceeds much more cleanly when CO₂ is present, producing CO. The syngas product has an H₂ : CO ratio of 1.5 with the fan type reactor and 0.67 with the tubular reactor. In the absence of CO₂, coke is the main carbonaceous product. Under all conditions studied the fan type reactor demonstrated higher methane conversions (up to 11.9%) and selectivities to hydrogen.     

In Situ Processing of Nano Crystalline Oxide Particles/Polymer Hybrid

Nano sized crystalline particles/polymer hybrids were synthesized form designed metal-organic precursors. The newly developed method is composed of the synthesis of organic matrix by polymerization and the in situ nucleation and growth of crystalline oxide particles in the organic matrix below 100°C. The design of metal-organic precursor modified with polymerizable ligand and the selection of reaction conditions does influence the size and crystallinity of ceramic particles in organic matrix. The nano-sized magnetic particle/polymer hybrid exhibits the interesting feature of superparamagnetism and quantum size effect. The crystalline particles of BaTiO₃/, PbTiO₃/, and KNbO₃/polymer hybrids behave to be dielectric and show the typical electro-rheological behavior.     

Tuning of luminescence spectra of neutral ruthenium(II) complexes by crystal waters

Neutral ruthenium(II) complexes [RuLL'(CN)2] (L, L' = bpy, dmb, dbb; bpy = 2,2'-bipyridine, dmb = 4,4'-dimethyl-2,2'-bipyridine, dbb = 4,4'-tert-butyl-2,2'-bipyridine) were prepared, and the luminescence characteristics of the complexes in the solid state were measured. The luminescence was tuned by crystal waters included in the crystals; for example, [Ru(dbb)2(CN)2] x 2H2O, [Ru(dbb)2(CN)2] x H2O, and [Ru(dbb)2(CN)2] emit luminescence at 640, 685, and 740 nm, respectively.     

Surface derivatization of poly(p-phenylene terephthalamide) fiber designed for novel separation and extraction media

The surface derivatization of poly(p-phenylene terephthalamide) fiber was studied. The obtained surface-derivatized filaments were packed into a fused-silica capillary to evaluate its surface characteristics by using GC. As the stationary phase for GC the surface-derivatized fibers showed higher retention for alkanes and alkylbenzenes than that with the untreated Kevlar fiber. The improvements on the retention power and the peak shape were observed on the benzyl-modified fibrous stationary phase. The derivatized fibrous materials were also evaluated as the extraction medium in fiber-in-tube SPE, and the effect of the surface modification on the extraction power was compared to the parent fiber. The results indicated that the modified fiber possessed a higher extraction power than the untreated fiber. Based on the facts, the successful modification of the fiber surface was estimated.     

Control of viscoelasticity using redox reaction

The viscoelasticity of a fluid was tuned with the Faradaic reaction of (11-ferrocenylundecyl)trimethylammonium bromide (FTMA), a "redox-switchable" surfactant. An aqueous solution of the reduced form of FTMA exhibited a remarkable viscoelasticity in the presence of sodium salicylate (NaSal) because of the formation of three-dimensional entanglement of wormlike micelles. Electrolytic oxidation of FTMA caused the viscosity of the system to dramatically decrease and the elasticity to disappear. This drastic decrease in viscoelasticity arose from the disruption of wormlike micelles. This novel electrorheological phenomenon is expected to be applicable to ink for inkjet printers, the electrochemically controlled release of substances entrapped in wormlike micelles of FTMA, and fluid flow rate control using electric signals.     

Detection of environmental chemicals by SPR assay using branched cyclodextrin as sensor ligand

We obtained the association constants Ka of estrogen (E2) and environmental chemicals by the surface plasmon resonance (SPR) assay using the immobilized mono-6-O-α-maltosyl-β-CD (G₂βCD) compared with the immobilized β-CD and the immobilized estrogen receptor (ER). The association behavior of G₂βCD was shown as a ER model compound. The calibration curve was determined by the initial rate of association depending on the various concentrations, and the minimum detectable concentrations in the order of parts per billion were calculated. The SPR assay has advantages that the pre-treatment of the sample is not necessary and the immobilized ligand is stable and useful for the repeated measurement.