Total synthesis and evaluation of the actin-binding properties of microcarpalide and a focused library of analogues

A comparative investigation shows that hydroxylated 10-membered lactones modeled around the fungal metabolites microcarpalide (1) and pinolidoxin (2) are endowed with selective actin-binding properties. Although less potent than the marine natural product latrunculin A, which represents the standard in the field, nonenolides of this type are significantly less toxic and accommodate substantial structural editing. Most notable is the fact that even an intramolecular transesterification with formation of a hydroxylated butanolide skeleton does not annihilate their microfilament disrupting capacity. This finding calls for a reinvestigation of the biological profile of other fungal metabolites that embody a similar motif. Microcarpalide (1) serving as the calibration point for this comparative study was prepared by total synthesis based on ring-closing metathesis (RCM) as the key step. The chosen route favorably compares to previous approaches to this target and provides further support for the notion that the (E,Z)-configuration of a medium-sized cycloalkene can be controlled by proper choice of the catalyst as previously outlined by our group. 9-epi-Microcarpalide 26 and furanone 27 as representative examples of the "natural productlike" compounds investigated herein have been characterized by crystal structure analysis.     

Surface design for precise control of spatial growth of a mesostructured inorganic/organic film on a large-scale area

A microfabrication technique is presented to fabricate a mesostructured inorganic/organic composite film, i.e., silica/cetyltrimethylammonium chloride (CTAC) film, with near-perfect site-selectivity on a large surface area based on a spatially regulated growth method. To precisely regulate the site-selective growth of this mesocomposite film at the solid/liquid interface, we designed a novel microtemplate consisting of a "dual-component" self-assembled monolayer (SAM) with alternating hydrophobic trifluorocarbon (CF3) and cationic amino (NH2) groups. First, (heptadecafluoro-1,1,2,2-tetrahydrodecyl)trimethoxysilane (FAS)-SAM was formed onto Si substrate covered with native oxide (SiO2/Si) from vapor phase. The substrate was then photolithographically micropatterned using 172 nm vacuum UV light. Finally, the micropatterned FAS-SAM was immersed in a solution of 1 vol % (aminoethylaminomethyl)phenethyltrimethoxysilane (AEAMPS) in absolute toluene. Due to these treatments, a dual-SAM microtemplate with CF3- and NH2-terminated surfaces was fabricated, as evidenced by lateral force microscopy, ellipsometry, and X-ray photoelectron spectroscopy. Using this template, the microfabrication of a mesocomposite film was demonstrated. As a control, the micropatterned hydrophobic FAS-SAM template (composed of CF3- and OH-terminated surfaces) was also treated under the same conditions. Optical microscopy and atomic force microscopy confirmed that the formation of the continuous mesocomposite film proceeded only on the FAS-SAM-covered regions, while the AEAMPS-SAM-covered regions remained free of deposits. This shielding effect also remained constant regardless of the pattern's geometry, i.e., the interval distance between the FAS-SAM-covered areas in the pattern. Through this approach, we were able to obtain well-defined 5-, 10-, and 20-mum wide mesocomposite microlines over the entire 10 x 10 mm2 area with high area-selectivity. On the other hand, when the SiO2 regions were not terminated with the cationic NH2 groups, cluster formation proceeded not only on the hydrophobic CF3 regions but also on the SiO2 regions, particularly with an increase in the pattern interval distance, resulting in lower final pattern resolution.     

Unique molecular orientation in a smectic liquid crystalline polymer film attained by surface-initiated graft polymerization

Liquid crystalline (LC) polymer brushes containing a mesogenic azobenzene (Az) moiety are synthesized on a quartz or silicon substrate by surface-initiated atom transfer radical polymerization. The molecular orientation of the Az units and the LC properties in the grafted chains are evaluated by UV-vis spectroscopy, polarized optical microscopy, and grazing incidence X-ray diffraction measurements. The Az side chains of the grafted chains exhibited a smectic LC phase in which the smectic layers are oriented perpendicular to the substrate with a parallel orientation of the mesogens. In contrast, a spincast film of the identical LC polymer without grafting to the surface shows layer structures parallel to the substrate. A drastic effect of tethering one end to the substrate on the LC orientation is demonstrated.     

meso‐Diketopyripentaphyrin and Diketopyrihexaphyrin as Macrocyclic Tripyrrinone Ligands for NiII Ions

We report expanded porphyrins with pyridine rings and two neighboring carbonyl groups, which allow Ni^II ions to coordinate to the tripyrrinone‐type NNNO coordination structure with Ni?O bonds. The selectivity of tripyrrinone is superior to other pyrrolic or pyridinic cavities of expanded porphyrins. Introduction of α‐carbonyl pyridine next to the tripyrrolic conjugated structure is a powerful strategy for regioselective metalation of flexible expanded porphyrinoids.     

Continuous measurements of stable isotopes of carbon dioxide and water vapour in an urban atmosphere: isotopic variations associated with meteorological conditions

Isotope ratios of carbon dioxide and water vapour in the near-surface air were continuously measured for one month in an urban area of the city of Nagoya in central Japan in September 2010 using laser spectroscopic techniques. During the passages of a typhoon and a stationary front in the observation period, remarkable changes in the isotope ratios of CO₂ and water vapour were observed. The isotope ratios of both CO₂ and water vapour decreased during the typhoon passage. The decreases can be attributed to the air coming from an industrial area and the rainout effects of the typhoon, respectively. During the passage of the stationary front, δ¹³C–CO₂ and δ¹⁸O–CO₂ increased, while δ²H–H₂Ov and δ¹⁸O–H₂Ov decreased. These changes can be attributed to the air coming from rural areas and the air surrounding the observational site changing from a subtropical air mass to a subpolar air mass during the passage of the stationary front. A clear relationship was observed between the isotopic CO₂ and water vapour and the meteorological phenomena. Therefore, isotopic information of CO₂ and H₂Ov could be used as a tracer of meteorological information.     

Characterization of BCN films synthesized by radiofrequency plasma enhanced chemical vapor deposition

Boron carbonitride (BCN) films have been synthesized on Si(1 0 0) substrate by radio frequency plasma enhanced chemical vapor deposition using tris-(dimethylamino)borane (TDMAB) as a precursor. The deposition was performed at the different RF powers of 400-800 W, at the working pressure of 2×10⁻¹ Torr. The formation of the sp²-bonded BCN phase was confirmed by Fourier transform infrared spectroscopy. X-ray photoelectron spectroscopy measurements showed that B atoms were bonded to C and N atoms to form the BCN atomic hybrid configurations with the chemical compositions of B₅₂C₁₂N₃₆ (sample 1; prepared at the RF power of 400 W), B₅₂C₁₀N₃₈ (sample 2; at 500 W) and B₄₆C₁₈N₃₆ (sample 3; at 800 W), respectively. Near-edge X-ray absorption fine structure (NEXAFS) measurements indicated that B atoms were bonded not only to N atoms but also to C atoms to form various configurations of sp²-BCN atomic hybrids. The polarization dependence of NEXAFS suggested that the predominant hybrid configuration of sp²-BCN films oriented in the direction perpendicular to the Si substrate.     

Chemical and Genetic Study of Ligularia cyathiceps in Yunnan Province of China

Root chemicals and evolutionarily neutral DNA regions in L. cyathiceps samples collected in the Zhongdian (Shangrila) County of Yunnan, P. R. China, were examined. Twenty compounds were isolated, including three new ones, 1β,10β‐epoxy‐6β‐(propionyloxy)furanoeremophilan‐9‐one ( 6 ), 1β,10β‐epoxy‐8α‐ethoxyeremophila‐6,11‐diene ( 14 ), and 11αH‐6β‐isobutyryloxy‐1β,10β,7β,8β‐diepoxyeremophilan‐12,8α‐olide ( 15 ). The chemical diversity was found to be limited, with cacalol ( 1 ) and 6‐(acyloxy)furanoeremophilan‐9‐ones ( 4 and/or 5 ) being major components in all the samples. The nuclear ribosomal RNA gene was also found to harbor little variation, although two distinct sequence types were found for the plastid atpB‐rbcL intergenic region.     

Lewis acid-catalyzed synthesis of dodecamethoxycalix[4]arene from 1,3,5-trimethoxybenzene and its conformational behavior and host-guest property

Lewis acid-catalyzed condensation of 1,2- and 1,3-dimethoxybenzenes with paraformaldehyde afforded an ortho-bridged cyclic trimer (1) and a meta-bridged cyclic tetramer (2), respectively. Furthermore, condensation of 1,3,5-trimethoxybenzene with paraformaldehyde in the presence of Lewis acid catalyst successfully rendered the first dodecamethoxy-substituted calix[4]arene (3) with high yield. From X-ray crystallography, it was found that 3 formed the partial cone conformation. The conformational behavior of 3 in the solution was investigated by variable temperature ¹H NMR measurements. The partial cone structure observed in the solid state was retained in the solution at low temperatures. Furthermore, because of the slow conformational exchanges of 3 on the NMR time scale, bimodal conformational exchanges were found. The host-guest property of 3 with the electron accepting guest, tetracyanoethylene (TCNE) was examined by UV-Vis measurements, and the ability to associate with the 3-TCNE complex was three times higher than that of the 2-TCNE complex. The observation is due to the superior electron donating property and slow conformational exchanges of 3 compared with those of analogous 2.     

Bicyclo[3.2.1]octanone catalysts for asymmetric alkene epoxidation: the effect of disubstitution

A series of 2-fluoro-8-oxabicyclo[3.2.1]octan-3-ones are prepared and tested as catalysts for alkene epoxidation with Oxone^®. These catalysts provide trans-stilbene oxide with up to 83% ee, but the highest ee value is obtained with the monofluorinated ketone 2: both 2,2- and 2,4-disubstituted catalysts afford epoxide of lower ee.