Reversed phase liquid chromatographic determination of organic acids using on-line complexation with copper(II) ion

We describe a simple and sensitive liquid chromatographic method for the analysis of organic acids using on-line complexation with copper(II) ion. Organic acids complexed with copper(II) ion were separated on a reversed-phase C18 column and detected by UV absorption at 240 nm. The copper(II) ion concentration in the mobile phase had a great influence on separation and sensitivity. A mobile phase consisting of 10 mM copper(II) sulfate in 5 mM sulfuric acid (pH 2.3) was used to separate nine organic acids (tartaric, malic, malonic, lactic, acetic, citric, maleic, succinic and fumaric acids). The detection limits of the examined organic acids calculated at S/N = 3 ranged from 0.6 to 100 μM. The detector signal was linear over three orders of magnitude of organic acid concentration. The method successfully measured organic acids in juice and vinegar samples.     

Facile synthesis of platinum nanoparticle-containing porous carbons,and their application to amperometric glucose biosensing

This study describes the facile synthesis of platinum nanoparticle-containing porous carbons (Pt/C) by carbonization of freeze-dried agarose gels containing potassium tetrachloroplatinate under a nitrogen atmosphere at 800 °C. By adjusting the ratio between agarose and platinate in the freeze-dried gels, the Pt content in the final Pt/C products could be systematically varied from 0–10 wt.%. Transmission electron microscopy, inductively coupled plasma atomic emission spectrometry, X-ray photoelectron spectroscopy, Raman spectroscopy, and nitrogen physisorption measurements revealed that the Pt/C materials obtained by this method possess high surface areas (350–500 m² g⁻¹), narrow Pt nanoparticle size distributions (6 ± 3 nm) and nanocrystalline graphite –like carbon character. By immobilization of glucose oxidase on the surface of a 4 wt.% Pt/C electrocatalyst prepared by this route, a very sensitive amperometric glucose biosensor was obtained (response time <2 min, sensitivity 1.9 mA M⁻¹; and a linear response with glucose concentration up to 10 mM). The simplicity and versatility of the described synthetic method suggests its application to the preparation of carbon supported noble metal catalysts including palladium/C and gold/C.

This study describes the facile synthesis of platinum nanoparticle-containing porous carbons (Pt/C) by carbonization of freeze-dried agarose gels containing potassium tetrachloroplatinate. The Pt/C materials exhibited excellent electrocatalytic activities, as demonstrated by their successful integration into amperometric glucose biosensor

     

Direct detection of nanoparticles and components in smoke by time-of-flight mass spectrometry with soft plasma ionization

A new system combining a soft plasma ionization (SPI) source with a time-of-flight mass spectrometer (TOFMS) has been successfully developed and applied to direct and on-line analysis of nanoparticles in smoke generated during combustion of mosquito coils with no sample preparation. The mass spectra of nanoparticles in smoke were examined in conjunction with the effects of species, pressure and current of the SPI discharge on fragmentation. The results indicated that a maximum mass of m/z 1576 was detectable when the following optima SPI conditions were satisfied: a He gas pressure of 1000 Pa with an air pressure of 1600 Pa and a discharge current of 110 mA. Furthermore, considering the results for emission spectra we suppose an ionization mechanism of SPI in which excitation and ionization of nitrogen molecule is promoted by the presence of He gas, leading to promote the smoke sample ionization. The mass spectrum of nanoparticles showed specific patterns of a peak interval of 74 which were assigned to triacetylene (1,3,5-hexatriyne). The most abundant peak in the mass spectrum, at m/z 452, was assigned to triacontanoic acid.     

Construction of hydrogen-bonded ternary organic crystals derived from L-tartaric acid and their application to enantioseparation of secondary alcohols

Ternary organic crystals consisting of an L-tartaric acid-derived dicarboxylic acid, a commercially available achiral diamine, and a chiral secondary alcohol have been developed and characterized by X-ray crystallography. 1D, 2D, and 3D hydrogen-bonded supramolecular networks were constructed, depending on the structure of the diamine used. Benzylic and aliphatic secondary alcohols were enantioselectively incorporated into the crystal and were successfully enantioseparated with up to 86 and 79% enantiomeric excess (ee), respectively. Selective incorporation of one enantiomer of 2-butanol, which is a small chiral aliphatic alcohol, was achieved by the cooperative effects of hydrogen bonds, CH···π interactions, and van der Waals interactions between the guest and host molecules, with the aid of two water molecules. The high host potential of the binary supramolecular system is mainly attributed to the skewed conformation of two rigid aromatic groups of tartaric acid derivatives, which prevents dense packing of the molecules and enhances the formation of multicomponent inclusion crystals.     

Enantioselective boronate additions to N-acyl quinoliniums catalyzed by tartaric acid

Tartaric acid catalyzes the asymmetric addition of vinylboronates to N-acyl quinoliniums, affording highly enantioenriched dihydroquinolines. The catalyst serves to activate the boronate through a ligand-exchange reaction and generates the N-acyl quinolinium in situ from the stable quinoline-derived N,O-acetal.     

Design, synthesis, and properties of boat-shaped glucopyranosyl nucleic acid

A boat-shaped glucopyranosyl nucleic acid (BsNA) was synthesized to investigate the possibility that the lean of a nucleobase is a factor affecting duplex-forming ability of oligonucleotides. From the crystal structure of a BsNA nucleoside and the thermal stability of duplex oligonucleotides, it was found that not only the lean of the base but also the rotation angle of the glycosidic bond axis were important factors in a stable duplex formation.     

From metal-organic framework to nanoporous carbon: toward a very high surface area and hydrogen uptake

In this work, with a zeolite-type metal-organic framework as both a precursor and a template and furfuryl alcohol as a second precursor, nanoporous carbon material has been prepared with an unexpectedly high surface area (3405 m(2)/g, BET method) and considerable hydrogen storage capacity (2.77 wt % at 77 K and 1 atm) as well as good electrochemical properties as an electrode material for electric double layer capacitors. The pore structure and surface area of the resultant carbon materials can be tuned simply by changing the calcination temperature.     

Photoreversible transformation between seconds and hours time-scales: threading of pillar[5]arene onto the azobenzene-end of a viologen derivative

Photoswitching of the transformation between seconds and hours time-scales is demonstrated using the threading of per-hydroxylated pillar[5]arene onto the azobenzene-end of a viologen derivative. When the azobenzene moiety was in the trans form, the threading of per-hydroxylated pillar[5]arene quickly took place at 25 °C and could not be monitored directly. The exchange rate (k) and half-life time (t(1/2)) examined by 2D EXSY NMR spectroscopy were found to be 0.209 ± 0.013 s(-1) and 3.33 ± 0.21 s, respectively. In contrast, the cis form of the azobenzene moiety required very long time (k = 2.14 ± 0.27 × 10(-5) s(-1), t(1/2) = 9.13 ± 1.2 h) to thread per-hydroxylated pillar[5]arene at 25 °C. Photoisomerization from the trans to the cis form generated the following increment of free energy of activation at 25 °C: ΔG(in)(?) (cis form) - ΔG(in)(?) (trans form) = 22.8 ± 0.24 kJ mol(-1), which led to the time-scale transformation. The tuning of the threading was also accomplished by heating/cooling: the rate constants increased on heating and decreased on cooling.     

Synthesis and X-ray crystal structure of a difunctionalized pillar[5]arene at A1/B2 positions by in situ cyclization and deprotection

The reaction of 1,4-dimethoxybenzene and paraformaldehyde using AlBr(3) yields multiple-deprotected pillar[5]arenes. A1/B2 di-deprotected pillar[5]arene can be isolated by silica gel chromatography and washing procedures. The X-ray structure and polymerization of the A1/B2 di-deprotected pillar[5]arene are reported.