A new biisoflavonoid from the roots of Erythrina variegata

A new biisoflavonoid, biseryvarin A (1a), together with two known compounds were isolated from the roots of Erythrina variegata. The structure of biseryvarin A was established on the basis of spectroscopic evidence. Biseryvarin A is the first dimeric isoflavonoid possessing isoprenoid groups from the genus Erythrina. Biseryvarin A showed low activity against methicillin-resistant Staphylococcus aureus (MRSA).     

Synthesis and properties of high‐molecular‐weight stereo di‐block polylactides with nonequivalent D/L ratios

Di‐stereoblock polylactides (di‐sb‐PLA: PLLA‐b‐PDLA) having high molecular weight (M_n > 100 kDa) were successfully synthesized by two‐step ring‐opening polymerization (ROP) of L ‐ and D ‐lactides using tin(2‐ethylhexanoate) as a catalyst. By optimizing the polymerization conditions, the block sequences were well regulated at non‐equivalent feed ratios of PLLA and PDLA. This synthetic method consisted of three stages: (1) polymerization of either L ‐ or D ‐lactide to obtain a PLLA or PDLA prepolymer with a molecular weight less than 50 kDa, (2) purification of the obtained prepolymer to remove residual lactide, and (3) polymerization of the enantiomeric lactide in the presence of the purified prepolymer. Their ¹³C and ³¹P NMR spectra of the resultant di‐sb‐PLAs strongly supported their di‐stereo block structure. These di‐sb‐PLAs, having weight‐average molecular weights higher than 150 kDa, were fabricated into polymer films by solution casting and showed exclusive stereocomplexation. The thermomechanical analysis of the films revealed that their heat deformation temperature was limited probably because of their low crystallinity owing to the non‐equivalent PLLA/PDLA ratio. The blend systems of the di‐sb‐PLAs having complementary stereo‐sequences (the one with a long PLLA block and the other with long PDLA block) were also prepared and characterized to enhance the sc crystallinity. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 794–801, 2010     

Synthesis of well‐defined and end‐polymerizable star‐shaped polysulfides and their application to negative photoresist

Various star‐shaped poly(phenoxy propylene sulfide)s (PPSs) bearing curable end groups were synthesized by the functionalization of the propagating ends of star‐shaped poly(PPS) with various electrophilies. The functionalization with chloromethyl styrene proceeded quantitatively, and afforded polymers with M_n almost agreed with theoretical value and narrow M_w/M_n. The photocuring conditions were optimized, and the addition of 10 wt % of poly(ethylene glycol) diacrylate was effective to attain sufficient crosslinking. The photocuring reaction of the end‐functionalized poly(PPS) films cast on silicon wafers was conducted by UV irradiation. The cured poly (PPS)s became insoluble in THF, supporting the sufficient crosslinking. Developing of a cured polymer yielded a negative photoresist pattern. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Design of efficient thermally activated delayed fluorescence materials for pure blue organic light emitting diodes

Efficient thermally activated delayed fluorescence (TADF) has been characterized for a carbazole/sulfone derivative in both solutions and doped films. A pure blue organic light emitting diode (OLED) based on this compound demonstrates a very high external quantum efficiency (EQE) of nearly 10% at low current density. Because TADF only occurs in a bipolar system where donor and acceptor centered (3)ππ* states are close to or higher than the triplet intramolecular charge transfer ((3)CT) state, control of the π-conjugation length of both donor and acceptor is considered to be as important as breaking the π-conjugation between them in blue TADF material design.     

Development of New Modifiers for Titanium Alkoxide-Based Sol-Gel Process

The effects of several hydroxyketones such as acetol, actoin, -ketobutanol themselves and their combinations with monoethanolamine (MEA) or ethylenediamine (ED) on the stabilization of titanium tetraisopropoxide (TTIP) in isopropanol solution are examined. Acetoin itself and the imine derivatives of acetol and acetoin were found to show extraordinarily strong stabilizing effect for the alkoxide. The properties including the crystal modifications and refractive index of TiO₂ films that were dip-coated using each stabilized solution are examined and discussed in comparison with those of the films obtained from the diethanolamine (DEA) systems. The effect of UV-light irradiation to the gel films on the crystallization of TiO₂ is also examined and discussed.     

Synthesis of poly(vinylene-arsine)s: alternating radical copolymerization of arsenic atomic biradical equivalent and phenylacetylene

Novel organoarsenic polymers, poly(vinylene-arsine)s, were synthesized by a free-radical alternating copolymerization of phenylacetylene with cyclooligoarsines as an atomic biradical equivalent. The polymerization between pentamethylpentacycloarsine (1a) or hexaphenylhexacycloarsine (1b) with phenylacetylene (2) in the presence of a catalytic amount of AIBN (in benzene; refluxing; for 12 h) gave the corresponding poly(vinylene-arsine)s. The obtained polymers were soluble in common organic solvents such as THF, chloroform, and benzene. From gel permeation chromatographic analysis (chloroform, PSt standards), the number-average molecular weights of the polymers from 1a and 1b were found to be 11500 and 3900, respectively. The structures of the polymers were supported by 1H and 13C NMR spectroscopies. The corresponding polymer was also obtained by irradiation of a benzene solution of 1a and 2 with xenon lamp at room temperature. After the polymer from 1a was stirred vigorously with 30% H2O2, the 1H NMR spectrum of the polymer showed the methyl proton that was assigned to As(III)-Me, suggesting the insensitivity of the trivalent state arsenic in the main chain to the oxidation. The structures and the molecular weights of the polymers were insensitive to the feed ratio of the monomers. This result indicates that the addition of the arsenic radical to phenylacetylene was a rate-determining step in the copolymerization.     

First total synthesis of artepillin C established by o,o'-diprenylation of p-halophenols in water

We have demonstrated that prenylation of p-halophenols was dependent on the solvent effect and succeeded in o,o'-diprenylation of p-halophenols in water. Following the Mizoroki-Heck coupling of the diprenyl-p-iodophenol 3c with methyl acrylate and then hydrolysis, we first synthesized artepillin C [3-(4-hydroxy-3,5-di(3-methyl-2-butenyl)phenyl)-2(E)-propenoic acid] (1), which is a biologically active constituent of propolis. These reactions may be applicable to the synthesis of various useful natural products such as 2,4,6-trisubstituted phenol derivatives.     

Effects of various thiol molecules added on morphology of dendrimer-gold nanocomposites

Interactions between poly(amidoamine) dendrimer (PAMAM)-gold nanocomposites and alkanethiols and between the former nanocomposites and thiol-modified poly(amidoamine) dendrons in ethyl acetate were investigated by adding alkanethiols, such as 1-propanethiol and 1,3-propanedithiol, and thiol-modified poly(amidoamine) dendrons, generations 0.5 and 2.5 (G0.5-SH and G2.5-SH). The PAMAM dendrimers with surface methyl ester groups used were generations 1.5 and 5.5 (G1.5 and G5.5). The mean particle sizes of PAMAM-gold nanocomposites were about 2.1 for G1.5 and 2.4 nm for G5.5. In both nanocomposite systems where 1-propanethiol and 1,3-propanedithiol were added, the mean particle size was about 4 nm, twice that of the systems where these thiols were not added. Increasing the addition of 1,3-propanedithiol made the average particle size smaller for both nanocomposites systems. To compare with alkanethiol, thiol-modified poly(amidoamine) dendron with a highly branched structure on one side was synthesized. Using G2.5-SH as a protective agent, dendron-gold nanocomposites with mean diameters of 3 to 4 nm were obtained. The difference in particle size was seen only when the combination of PAMAM-gold nanocomposites and thiol-modified dendron was less sterically dense, modified dendron (G0.5-SH). The mechanisms for morphology changes in the dendrimer-gold nanocomposites by the addition of these thiols are discussed.     

Gelatin methacrylate as a promising hydrogel for 3D microscale organization and proliferation of dielectrophoretically patterned cells

Establishing the 3D microscale organization of cells has numerous practical applications, such as in determining cell fate (e.g., proliferation, migration, differentiation, and apoptosis) and in making functional tissue constructs. One approach to spatially pattern cells is by dielectrophoresis (DEP). DEP has characteristics that are important for cell manipulation, such as high accuracy, speed, scalability, and the ability to handle both adherent and non-adherent cells. However, widespread application of this method is largely restricted because there is a limited number of suitable hydrogels for cell encapsulation. To date, polyethylene glycol-diacrylate (PEG-DA) and agarose have been used extensively for dielectric patterning of cells. In this study, we propose gelatin methacrylate (GelMA) as a promising hydrogel for use in cell dielectropatterning because of its biocompatibility and low viscosity. Compared to PEG hydrogels, GelMA hydrogels showed superior performance when making cell patterns for myoblast (C2C12) and endothelial (HUVEC) cells as well as in maintaining cell viability and growth. We also developed a simple and robust protocol for co-culture of these cells. Combined application of the GelMA hydrogels and the DEP technique is suitable for creating highly complex microscale tissues with important applications in fundamental cell biology and regenerative medicine in a rapid, accurate, and scalable manner.