Phenomenon of labyrinth seal with low static pressure difference and large clearance

This paper discusses the straight-through type labyrinth seal. This labyrinth seal is used for axial flow fans, which h ave an outer ring at the blade tip to seal the clearance between the ring tip and the fan shroud, in order to prevent the reverse flow or leakage. These fans are used for the cooling of automobile radiators . In these cases, the labyrinth seal is used in an extremely low static pressure difference and a large clearance . A significant decrease of the leakage rate was reported even when the labyrinth seal rotated in comparatively low speed in this unique condition according to the authors’ former report. However, this phenomen on is differ ent from past research. Further more the cause of th is phenomenon has not been determined. Therefore, the internal flow was depicted with Computational Fluid Dynamics (CFD) in or der to clarify the ca use of this phenomenon. The results of CFD show that the leakage rate decreases significantly because the carry -over flow is intercepted in the expansion groove. This is the newly discovered phenomenon which occurs under the unique condition of an extremely low differential pressure. It has not been pointed out before as the reason why the rotation decreases the leakage rate.     

Role of Al or Eu on thermoluminescence of Al- and/or Eu-doped SiO2 crystals

Although SiO₂ crystals have been used in electroluminescence devices and thermoluminescence (TL) dosimeters, the emission mechanism of TL has not yet been clearly explained. Recently, as we could get amorphous and highly pure SiO₂ prepared by the sol-gel method, we have investigated the TL emission mechanism using Al³⁺- and/or Eu³⁺-doped SiO₂ crystalline samples prepared by the heat-treatment under much lower temperature that the melting point of SiO₂. The TL spectrum of the Eu³⁺-doped sample displayed several peaks, including two main peaks due to the electron transitions from ⁵D₂ to ⁷F₅ (ca. 570 nm) and from ⁵D₀ to ⁷F₂ (ca. 610 nm). As doping concentration increased, all the peak intensities reduced from maximum values except that due to the electron transition from ⁵D₀ to ⁷F₂. These observations are thought to result from a cross-relaxation process due to the lack of inversion symmetry at the Eu³⁺ site.     

Preconcentration of trace silver with yeast for river water analysis

A new preconcentration method with yeast is presented. The method was evaluated for the determination of trace silver in river waters by graphite furnace atomic absorption spectrometry (GFAAS). A suitable cultivation bed for preconcentration of silver was 1.75 mg ml-1 2-ammonium hydrogen phosphate. The optimal cultivation time and temperature were 2 h and 25 degrees C. Under optimal conditions, silver in aqueous sample was concentrated to 6.9-fold by yeast. The detection limit was 4.6 pg ml-1 (3S/N) for silver in river water. The yeast preconcentration method was applied to the determination of silver in river waters. The recovery of spiked silver was in the range of 89 to 110%. By the preconcentration, it was found that ultra trace silver in river waters could be determined without interferences of matrix elements, after only the cultivation and with no chemical treatment.     

Alternate stranded triplex formation of chimeric DNA composed of tandem alpha- and beta-anomeric strands

A chimeric oligoDNA composed of a natural beta-anomeric oligonucleotide portion and an unnatural alpha-anomeric oligonucleotide portion forms an alternate stranded triplex possessing enhanced thermal stability compared to the triplexes composed of the parental oligomers.     

Determination of strontium in biological samples by atomic emission spectrometry with electrothermal atomization

Summary Strontium showed a high atomic emission in a molybdenum microtube. The addition of hydrogen in the argon gas atmosphere served to increase the atomic emission. No interferences from less than 5 ng of potassium, calcium and magnesium were found. Other elements also had no interferences at the concentration levels usually found in biological samples. Samples were digested with nitric acid in a Uni-Seal decomposition vessel. The results obtained showed good agreement with the certified values. Atomic emission spectrometry with a molybdenum microtube atomizer permits a simple and sensitive determination of strontium in biological samples (coefficient of variation 2.5% for 10 pg Sr).

---

Strontiumbestimmung in biologischem Material durch Atomemissions-Spektrometrie mit elektrothermischer Atomisierung

Zusammenfassung Eine hohe Atomemission wurde für Strontium bei Verwendung einer Molybdän-Mikroröhre beobachtet. Durch Wasserstoffzusatz zum Argon konnte sie noch weiter erhöht werden. Weniger als 5 ng K, Ca und Mg verursachen keine Störung. Andere Elemente stören nicht in den Konzentrationsbereichen, wie sie üblicherweise in biologischen Materialien vorkommen. Der Aufschluß der Proben wurde mit Salpetersäure in Uni-Seal-Gefäßen vorgenommen. Die erhaltenen Werte stimmten gut mit zertifizierten Daten überein. Die vorgeschlagene Methode ermöglicht eine einfache und empfindliche Strontiumbestimmung in biologischen Proben (Variationskoeffizient 2,5% bei 10 pg Sr).

---

---

This work was supported by the Ministry of Education, Science and Culture of Japan through a Grant-in-Aid for Special Project Research.     

Discrimination of the geometrical isomers of 2,3-, 2,5-, and 2,6-dimethylpiperazines based on 1 H?Nmr spectral data

¹ H-Nmr spectra of cis and trans isomers of 2,3-, 2,5-, and 2,6-dimethylpiperazines were taken at various temperatures. The spectra of geometrical isomers bearing the ae or ea dimethyl groups showed broadening at lower temperatures. It was clarified that the measurement of the spectra at lower temperatures is useful for the discrimination of the geometrical isomers of dimethylpiperazines.     

Excited state property of hardly photodissociable heme-CO adduct studied by time-dependent density functional theory

While most of CO-bound hemes are easily photodissociated with a quantum yield of nearly unity, we occasionally encounter a CO-heme which appears hardly photodissociable under the ordinary measurement conditions of resonance Raman spectra using CW laser excitation and a spinning cell. This study aims to understand such hemes theoretically, that is, the excited-state properties of the five-coordinate heme-CO adduct (5cH) as well as the 6c heme-CO adduct (6cH) with a weak axial ligand. Using a hybrid density functional theory, we scrutinized the properties of the ground and excited spin states of the computational models of a 5cH and a water-ligated 6cH (6cH-H(2)O) and compared these properties with those of a photodissociable imidazole-ligated 6cH (6cH-Im). Jahn-Teller softening for the Fe-C-O bending potential in the a(1)-e excited state was suggested. The excited-state properties of 6cH-Im and 5cH were further studied with time-dependent DFT theory. The reaction products of 6cH-Im and 5cH were assumed to be quintet and triplet states, respectively. According to the time-dependent DFT calculations, the Q excited state of 6cH-Im, which is initially a pure pi-pi state, crosses the Fe-CO dissociative state (2A') without large elongation of the Fe-CO bond. In contrast, the Q state of the 5cH does not cross the Fe-CO dissociative state but results in the formation of the excited spin state with a bent Fe-C-O. Consequently, photoisomerization from linear to bent Fe-C-O in the 5cH is a likely mechanism for apparent nonphotodissociation.