Microwave EPR spectroscopy of cobalt-doped germanium cuprate

Resonance magnetoabsorption spectra of CuGeO₃ single crystals containing 2% Co impurity have been studied in the frequency range 60–360 GHz in magnetic fields of up to 16 T and in the temperature interval 2–60 K with the magnetic field B aligned parallel to the a crystallographic axis. In addition to the Cu²⁺ chain resonance, a new absorption line (unobserved previously in doped CuGeO₃ and deriving apparently from the Co²⁺ ions) was detected in EPR spectra. Quantitative analysis of the spectra suggests that the spin-Peierls transition occurs in about 10% Cu²⁺ chains, while the spin-Peierls state in the remaining 90% chains is completely destroyed by cobalt doping. The results obtained reveal considerable deviations from the universally accepted scenario of CuGeO₃ doping and are discussed within alternative theoretical models, namely, the quantum critical behavior (based on the EPR theory for quasi-one-dimensional systems) and a three-dimensional antiferromagnet with the Néel temperature lowered by disorder.     

Building a Simple Model of a Pulse-Frequency-Modulation Photosensor and Demonstration of a 128 x 128-pixel Pulse-Frequency-Modulation Image Sensor Fabricated in a Standard 0.35-$mUm Complementary Metal-Oxide Semiconductor Technology

We present a simple model of the pulse-frequency-modulation (PFM) photosensor that provides explicit relationships between circuit parameters and output characteristics. The model treats the PFM photosensor with a feedback loop as an open loop circuit. Several characteristics such as output pulse frequency for light intensity and photosensitivity are expressed by device parameters of a photodiode, reset transistor, and chain of inverters. The relationships derived from the proposed model help us to comprehend the results by simulation program with integrated circuit emphasis (SPICE) or experiments. We design and fabricate a 128 x 128-pixel PFM image sensor with photosensitivity of 0.15 Hz/lux. As a demonstration, a figure of a dinosaur is captured using the fabricated image sensor to discuss its operation. Characteristics of a normal pixel and white and black defect pixels are measured and discussed based on the results of formulations.     

Adsorption of thiolates to singly coordinated sites on Au111 evidenced by photoelectron diffraction

The adsorption structure of methylthiolate (CH3S) adsorbed on Au(111), a long-standing controversial issue, has been unambiguously determined by scanned-energy and scanned-angle S 2p photoelectron diffraction. The methylthiolate molecules are found to occupy atop sites with a S-Au distance of 2.42 +/- 0.03 A. The angular distribution of the S 2p photoelectrons due to forward scattering reveals that the S-C bond is inclined by approximately 50 degrees from the surface normal towards both the [211] and [121] (nearest-neighbor thiolate) directions.     

An idea for predicting the evaporation residue cross section in superheavy mass region

A trial to clarify the main contributors to the evaporation residue cross section in the superheavy mass region is presented. The precise analysis of these factors enables us to understand more clearly the trend of experimental data decreasing exponentially when the atomic number of the residue nucleus increases. It is found that almost all of the experimental data producing nuclei with Z=104 to 114 are fitted with a common parameter set within a reasonable allowance, i.e., ±0.7 order. In this sense, this model has a reliable predictability for the synthesis of new elements.     

Preparation of organic-inorganic composites containing rod-like phthalocyanine polymers

Sol-gel polymerization of tetraethoxysilane in the presence of amphiphilic phthalocyanine polymer 2 produced organic-inorganic composites with the rod-like phthalocaynine polymers incorporated within ordered hexagonal channels.     

Selective ligation to sterically isolated metallophthalocyanines

A new class of sterically hindered phthalocyanine has been synthesized and characterized. Pentaphenylbenzene units were introduced at the periphery of each phthalocyanine to yield a sterically protected metal center. The attachment of the bulky oligophenylbenzene units resulted in the complete isolation of individual MPc molecules. The pockets around a cobalt center affect selectivity in the ligation of pyridines that have different sizes and shapes.     

Reinterpretation of the molecular O2 chemisorbate in the initial oxidation of the si(111)7 x 7 surface

The initial oxygen adsorption on the Si(111)7 x 7 surface was investigated by high-resolution x-ray absorption spectroscopy. Below 220 K, a molecular adsorption species is identified by distinctive absorption resonances due to the 1 pi(g) molecular orbitals. The molecular species is metastabilized to have a lifetime of 15-35 min at 135 K only with the presence of atomic adsorbates of more than 0. 1 ML (monolayer). It is thus clearly evidenced that the very initial adsorption is dissociative even at 100 K and the molecular species is not a precursor state. The molecular adsorption structures with the coadsorbed oxygen atoms are suggested.     

Submillimeter-wave ESR measurements of Ca1−xCuO2 (x = 0.164) with edge-sharing CuO2 chains

Quasi-one-dimensional (1-D) cupric oxide Ca_1?xCuO₂ (x = 0.164) is the system with 25–40% hole-doped edge-sharing CuO₂ chains. However, the holes are almost localized in Ca_1?xCuO₂ and its magnetic susceptibility with a peak at 30 K was explained by the model considering both 1-D antiferromagnetic chains and spin dimers (Z. Hiroi, M. Okumura, Y. Nabeshima, T. Yamada, M. Takano: J. Phys. Soc. Jpn.69, 1824, 2000). To clarify the magnetic nature of Ca_1?xCuO₂, we performed submillimeter-wave electron spin resonance (ESR) measurements on a powder sample of Ca_0.83?6CuO₂. The resonance above 12 K showed typical powder ESR of Cu²⁺ and theg-values were determined to be g∥= 2.33 and g_⊥ = 2.06 from the analysis. The resonance below 12 K changed completely from ESR. The frequency-field relation of ESR at 1.8 K clearly showed the easy-axis type antiferromagnetic resonance.     

The effect of iron spin transition on electrical conductivity of (Mg,Fe)O magnesiowüstite

We measured the electrical conductivity of Mg_0.81Fe_0.19O magnesiowüstite, one of the important minerals comprising Earth’s lower mantle, at high pressures up to 135 GPa and 300 K in a diamond-anvil cell (DAC). The results demonstrate that the electrical conductivity increases with increasing pressure to about 60 GPa and exhibits anomalous behavior at higher pressures; it conversely decreases to around 80 GPa and again increases very mildly with pressure. These observed changes may be explained by the high-spin to low-spin transition of iron in magnesiowüstite that was previously reported to occur in a similar pressure range. A very small pressure effect on the electrical conductivity above 80 GPa suggests that a dominant conduction mechanism changes by this electronic spin transition. The electrical conductivity below 2000-km depth in the mantle may be much smaller than previously thought, since the spin transition takes place also in (Mg,Fe)SiO₃ perovskite.     

Determination of cadmium in river water by sequential metal vapor elution analysis

Determination of cadmium in river water by sequential metal vapour elution analysis (column temperature; > 1500 K) with argon and hydrogen carrier gas and with atomic absorption spectrometric detection is described. The column is made of a molybdenum capillary tube (i.d. 1.22 mm) and the temperature is 1760 K. The cadmium vapor was separated from those of calcium, iron and sodium. The calibration graph was linear up to 15 μ/ml. Relative standard deviations of 0.8–4.3% were obtained in the range 1 to 15 μ/ml. Cadmium in spiked samples (river water) was determined. The results were in good agreement with the amount spiked.