Hydrogen-bonded networks in organic conductors: crystal structures and electronic properties of charge-transfer salts of tetracyanoquinodimethane with 4,4'-biimidazolium having multiprotonated States

[structure: see text] Novel hydrogen-bonded charge-transfer salts of TCNQ with mono- and diprotonated 4,4'-biimidazolium were synthesized in order to demonstrate the high potential of the 4,4'-biimidazole system in a molecular conductor from the viewpoint of crystal engineering and electronic modulation. Crystal structure analyses of neutral 4,4'-biimidazole and TCNQ salts revealed the formation of two types of hydrogen-bonding modes of the 4,4'-biimidazole moiety depending on the protonated states. Neutral 4,4'-biimidazole possessed a linear chain mode of hydrogen-bonding to construct two-dimensional network. In the TCNQ salt of monoprotonated 4,4'-biimidazolium, the 4,4'-biimidazole moiety formed a dimer by a complementary mode of hydrogen-bonding. In contrast, the salt of diprotonated 4,4'-biimidazolium showed a double linear chain mode of hydrogen-bonding to construct a three-dimensional network. The formation of two types of hydrogen-bonding modes made the difference in the stacking patterns of TCNQ columns and in their transport properties. The TCNQ salt of diprotonated 4,4'-biimidazolium exhibited high electrical conductivity (sigma(rt) = 1.1 x 10(-1) S cm(-1)).     

Ferroelectric phase transitions in Pb2xSn2(1-x)P2Se6 system

Heat capacities of the Pb_2xSn_2(1-x)P₂Se₆ crystals (x=0, 0.098, 0.251, 0.402 and 1.0) were measured using an adiabatic calorimeter at temperatures between 10 and 350 K. In the crystal of x=0, two heat capacity anomalies corresponding to the ferroelectric commensurate - intermediate incommensurate(C-IC) phase transition temperature T _i, and the incommensurate - paraelectric (IC-N) phase transition temperature T _c, were observed at 193.24±0.10 and 220.07±0.15 K, respectively. The phase transition temperatures decreased with an increase in Pb²⁺ concentration. The anomaly at Ti disappeared at x=0.251 in the mixed systems of the Pb_2xSn_2(1-x)P₂Se₆. In the crystal of Pb₂P₂Se₆ (x=1.0), no phase transition was observed. The normal heat capacities for the mixed crystals were determined by least squares fitting of the Debye and Einstein functions to the experimental data. The anomalous heat capacities gave the phase transition entropies of 8.5 and 1.5 J mol^-1 K^-1 for x=0. The large transition entropies are consistent with an order-disorder mechanism in the ferroelectric-paraelectric phase transitions in x=0. This revised version was published online in August 2006 with corrections to the Cover Date.     

Solvent and steric effects on the extraction of copper(II) with pivalic acid

The solvent extraction of copper(II) with trimethylacetic acid using benzene and 1-octanol as solvents was performed at 25 degrees C and 0.1 mole. dm(-3) ionic strength in the aqueous phase. In contrast to the extraction of copper(II) with a saturated straight-chain carboxylic acid in benzene, the dimeric copper(II) trimethylacetate was observed to dissociate into the monomer, even at a moderately high concentration of copper(II) in the benzene phase. In the system using 1-octanol as a solvent, both the monomeric and dimeric copper(II) species are suggested to be solvated by some 1-octanol molecules. It has been found that the dimerization and adduct formation of copper(II) species in benzene may more effectively enhance the extractability of copper(II) than the solvation by 1-octanol molecules.     

Phosphorus in organic synthesis—VII : Diphenyl phosphorazidate (DPPA). A new convenient reagent for a modified curtius reaction

A simple one-step conversion of carboxylic acids to urethanes was achieved by diphenyl phosphorazidate (DPPA). The reaction procedure is quite simple, occurring by refluxing an equimolecular mixture of a carboxylic acid, DPPA, and triethylamine in the presence of a hydroxyl component. Aromatic, aliphatic, and heterocyclic carboxylic acids underwent rearrangements in satisfactory yields. As this modified Curtins reaction is much simpler and less laborious than the classical Curtius reaction and proceeds under mild conditions, it may have a broad synthetic utility.     

Thermodynamically stable vesicle formation from glycolipid biosurfactant sponge phase

Thermodynamically stable vesicle (L(alpha1)) formation from glycolipid biosurfactant sponge phase (L(3)) and its mechanism were investigated using a "natural" biocompatible mannosyl-erythritol lipid-A (MEL-A)/L-alpha-dilauroylphosphatidylcholine (DLPC) mixture by varying the composition. The trapping efficiency for calcein and turbidity measurements clearly indicated the existence of three regions: while the trapping efficiencies of the mixed MEL-A/DLPC assemblies at the compositions with X(DLPC)< or =0.1 or X(DLPC)> or =0.8 were almost zero, the mixed assemblies at the compositions with 0.1 or =0.8 were multilamellar vesicles (L(alpha)) with diameter from 2 to 10 microm. Meanwhile, dynamic light scattering (DLS) measurement revealed that the average size of the vesicles at the composition of X(DLPC)=0.3 was 633.2 nm, which is remarkably small compared to other compositions. Moreover, the mixed vesicle solution at the composition of X(DLPC)=0.3 was slightly bluish and turbid and kept its dispersion stability at 25 degrees C for more than 3 months, indicating the formation of a thermodynamically stable vesicle (L(alpha1)). These results exhibited the formation of a thermodynamically stable vesicle (L(alpha1)) with a high dispersibility from the MEL-A/DLPC mixture. The asymmetric distribution of MEL-A and DLPC in the two vesicle monolayers caused by the difference in geometrical structures is very likely to have changed their self-assembled structure from a sponge phase (L(3)) to a thermodynamically stable vesicle (L(alpha1)).     

Control of calcium carbonate polymorphism and morphology through biomimetic mineralization by means of nanotechnology

In vitro biomimetic mineralization by means of nanotechnology allows the formation of calcium carbonate polymorphs at low temperatures (<25 degrees C) under a CO(2) atmosphere of 500-1500 ppm. A two-dimensional zinc-ion ordered array (zinc array), which acts as an active-site mimic of carbonic anhydrase, has been prepared by immersing the self-organized monolayer of 3-(2-imidazolin-1-y)propyltriethosilane on mica (ImSi substrate) into aqueous zinc solution. The zinc array mounted on the ImSi substrate catalyzed the conversion from CO(2) to HCO(3) (-), and accelerated the formation of calcium carbonate. In situ X-ray diffraction data of the formed calcium carbonate on the poly(L-aspartate)-coated chitin substrate (pAsp substrate), with calcium ion-recognition sites, demonstrated that the interaction between the zinc array and pAsp substrates formed both vaterite and calcite at low temperature (15 degrees C) and mainly vaterite at 25 degrees C; this interaction also controlled the morphology of calcium carbonate formed on pAsp substrate.     

A New Approach to the Construction of BEDT-TTF Derivatives Condensed with Heterocycles via BF3-promoted Reactions of Organotin Thiolates

The synthesis of BEDT-TTF derivatives fused with heterocycles (3–7) has been accomplished via the BF₃-promoted reaction of organotin thiolates (8 and 9) with electrophiles (10 and 11). Electrical conductivities of radical cation salts derived from some of them were also investigated.     

Contracted polarization functions for B to Ar

Using optimal exponents for B through Ne given by Dunning and those for Al through Ar by Woon and Dunning, d-type contracted polarization functions (2d/1d), (3d/1d), and (3d/2d) are generated from natural orbitals of atomic single and double excitation configuration interaction (SDCI) calculations, where the numbers before and after the slash are those of the primitive and contracted Gaussian type functions. The resulting contracted functions are tested on N₂ and P₂ molecules by self-consistent field and SDCI calculations, which clarify characteristics of the present polarization functions. Received: 5 June 1997 / Accepted: 20 August 1997     

Cross-linking chemistry and biology: development of multifunctional photoaffinity probes

An efficient method of photoaffinity labeling has been developed based on rationally designed multifunctional photoprobes. Photoaffinity techniques have been used to elucidate the protein structure at the interface of biomolecules by the photochemical labeling of interacting sites. However, the identification of labeled sites within target proteins is often difficult. Novel biotinyl bioprobes bearing a diazirine photophore have contributed significantly to the rapid elucidation of ligand binding sites within proteins, thereby extending conventional photoaffinity methods. This article discusses the synthesis and applications of various photoprobes bearing a biotin, including strategies using cleavable linkages between photophores. The combination of photoaffinity methods with chip technology is also described as a novel entry to rapid affinity-based screening of inhibitors. This review focuses on a rapid and reliable photoaffinity method utilizing diazirine-based multifunctional photoprobes with numerous potential applications in functional proteomics of biomolecular interactions.